An Investigation of the Effects of Layer Thickness on the Fracture Behavior of Layered NiAl/V Composites
Source abstract
Abstract
The effects of vanadium layer thickness (100, 200 and 400 μm) on the resistance-curve behavior of NiAl/V, microlaminates are examined in this paper. The fracture resistance of the NiAl microlaminates reinforced with 20 vol.% of vanadium layers is shown to increase with increasing vanadium layer thickness. The improved fracture toughness (from an NiAl matrix toughness of 6˜.6MPam to a steady-state toughness of 1˜5MPam obtained from finite element analysis) is associated with crack bridging and the interactions of cracks with vanadium layers. The reinitiation of cracks in adjacent NiAl layers is modeled using finite element methods and the reinitiation is shown to occur as a result of strain concentrations at the interface between the adjacent NiAl layers and vanadium layers. The deviation of the reinitiated cracks from the pure mode I direction is shown to occur in the direction of maximum shear strain. Toughening due to crack bridging is also modeled using large-scale bridging models. The intrinsic toughness levels of the microlaminates are also inferred by extrapolating the large scale bridging models to arbitrarily large specimen widths. The extrapolations also show that the small-scale bridging intrinsic toughness increases with increasing vanadium layer thickness.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · Advanced ceramic materials synthesis · MXene and MAX Phase Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Materials Science and Engineering, The Ohio State University, 2041 College Road, Columbus, OH 43210-1179
Applied Mechanics Section, Department of Aerospace Engineering, Applied Mechanics and Aviation, The Ohio State University, 2041 College Road, Columbus, OH 43210-1179
References (19)
Show source-provided references
1. Bloyer D. R. , Venkateswara RaoK. T., and RitchieR. O., 1996, Materials Science and Engineering, Vol. A216, pp. 80-90.10.1016/0921-5093(96)10391-9 ↗
2. Bloyer D. R. , Venkateswara RaoK. T., and RitchieR. O., 1998, Metallurgical and Materials Transactions A, Vol. 29A, pp. 2483–2496.10.1007/s11661-998-0220-0 ↗
3. Bowman R. R. , NoebeR. D., RajS. V., and LocciI. E., 1992, Metallurgical Transactions A, Vol. 23A, pp. 1493–1508.10.1007/BF02647332 ↗
4. Budiansky B. , AmazigoJ. C., and EvansA. G., 1988, J. Mech. Phys. Solids, Vol. 36, pp. 167–187.10.1016/S0022-5096(98)90003-5 ↗
5. Cox B. N. , and LoC. S., 1992, Acta Metallurgica et Materialia, Vol. 40, pp. 69–80.10.1016/0956-7151(92)90200-X ↗
6. Cox B. N. , and RoseL. R. F., 1996, Mechanics of Materials, Vol. 22, pp. 249–263.10.1016/0167-6636(95)00025-9 ↗
7. Chen X. F. , JohnsonD. R., NoebeR. D., and OliverB. F., 1995, Journal of Materials Research, Vol. 10, pp. 1159–1170.10.1557/JMR.1995.1159 ↗
8. Fett, T., and Munz, D., 1994, “Stress Intensity Factors and Weight Functions for One-Dimensional Cracks,” Institut fur Materialforschung, Kernforschungszentrum, Karlsryhe, Germany.
9. George E. P. , and LiuC. T., 1990, Journal of Materials Research, Vol. 5, pp. 754–762.10.1557/JMR.1990.0754 ↗
10. Heredia F. E. , HeM. Y., LucasG. E., EvansA. G., DeveH. E., and KonitzerD., 1993, Acta Metallurgica et Materialia, Vol. 41, pp. 505–511.10.1016/0956-7151(93)90079-8 ↗
11. Joslin S. M. , ChenX. F., OliverB. F., and NoebeR. D., 1995, Materials Science and Engineering, Vol. A196, pp. 9–18.10.1016/0921-5093(94)09683-X ↗
12. Miracle D. B. , 1993, Acta Metallurgica et Materialia, Vol. 41, pp. 649–684.10.1016/0956-7151(93)90001-9 ↗
13. Noebe, R. D., Ritzert, F. J., Misra, A., and Gibala, R., 1991, “Prospects for Ductility and Toughness Enhancement of NiAl by Ductile Phase Reinforcement,” NASA Technical Memorandum 103796, NASA Lewis Research Center, Cleveland, OH.
14. Odette G. R. , ChaoB. L., SheckherdJ. W., and LucasG. E., 1992, Acta Metallurgica et Materialia, Vol. 40, pp. 2381–2389.10.1016/0956-7151(92)90157-A ↗
15. Ramasundaram P. , BowmanR., and SoboyejoW., 1998, Materials Science and Engineering, Vol. A248, pp. 132–146.10.1016/S0921-5093(98)00503-6 ↗
16. Subramanian P. R. , MendirattaM. G., and MiracleD. B., 1994, Metallurgical and Materials Transactions A, Vol. 25A, pp. 2769–1781.10.1007/BF02649228 ↗
17. Tada, H., Paris, P. C., and Irwin, G. R., 1985, “The Stress Analysis of Cracks Handbook,” Del Research Corporation, St. Louis, MO.
18. Ye, F., Li, M., and Soboyejo, W. O., 1999, in press, Journal of the American Ceramic Society.
19. Zok F. , and HomC. L., 1990, Acta Metallurgica et Materialia, Vol. 38, pp. 1895–1904.10.1016/0956-7151(90)90301-V ↗