Surface Strains Due to Face Loading of a Slot in a Layered Half-Space
Source abstract
Abstract
A solution is presented that will allow the compliance method for residual stress measurement to be applied to layered materials. The solution is for surface strains due to arbitrary normal stress loading on the faces of a slot in a layered half-space. The materials are homogeneous isotropic elastic with different elastic constants and the slot may penetrate into the substrate. The solution is accomplished using the body force method and the solution for a point force in two bonded half spaces. The results indicate that, for residual stress measurement, the effects of the substrate properties are significant for materials with elastic moduli differing by 50 percent or more when the slot penetrates to at least one-half of the layer thickness.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Welding Techniques and Residual Stresses · Fatigue and fracture mechanics · Advanced Welding Techniques Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Los Alamos National Laboratory, Los Alamos, NM 87545
Department of Mechanical Engineering, University of California, Berkeley, CA 94720
References (12)
Show source-provided references
1. Chan K. S. , KarasudhiP., and LeeS. L., 1974, “Force at a Point in the Interior of a Layered Elastic Half Space,” International Journal of Solids and Structures, Vol. 10, pp. 1179–1199.10.1016/0020-7683(74)90067-5 ↗
2. Cheng W. , and FinnieI., 1993, “A Comparison of the Strains Due to Edge Cracks and Cuts of Finite Width With Applications to Residual Stress Measurement,” ASME JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY, Vol. 115, pp. 220–226.10.1115/1.2904210 ↗
3. Cheng W. , FinnieI., GremaudM., and PrimeM. B., 1994, “Measurement of Near Surface Residual Stresses Using Electric Discharge Wire Machining,” ASME JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY, Vol. 116, pp. 1–7.10.1115/1.2904251 ↗
4. Davis, P. J., and Rabinowiz, P. R., 1984, Methods of Numerical Integration, 2nd edition, Academic Press, Orlando.10.1016/B978-0-12-206360-2.50012-1 ↗
5. Dundurs J. , and Hete´nyiM., 1961, “The Elastic Plane With a Circular Insert, Loaded by a Radial Force,” ASME Journal of Applied Mechanics, Vol. 28, pp. 103–111.10.1115/1.3640419 ↗
6. Fraga, W. E., and Hewitt, R. L., 1983, “Implementation of Nisitani’s Body Force Method For the Solution of Notch Problems,” Aeronautical Note NAE-AN-17, National Aeronautical Establishment (Canada).
7. Frasier J. T. , and RongvedL., 1957, “Force in the Plane of Two Joined Semi-Infinite Plates,” ASME Journal of Applied Mechanics, Vol. 24, pp. 582–584.10.1115/1.4011604 ↗
8. Hete´nyi M. , and DundursJ., 1962, “The Elastic Plane With a Circular Insert, Loaded by a Tangentially Directed Force,” ASME Journal of Applied Mechanics, Vol. 29, pp. 362–368.10.1115/1.3640555 ↗
9. Nisitani, H., 1978, “Solutions of Notch Problems by Body Force Method,” Mechanics of Fracture, Vol. 5: Stress Analysis of Notch Problems, G. C. Sih, ed., pp. 1–68.10.1007/978-94-009-9923-7_1 ↗
10. Noda N. , ArakiK., and ErdoganF., 1992, “Stress Intensity Factors in Two Bonded Elastic Layers with a Single Edge Crack Under Various Loading Conditions,” International Journal of Fracture, Vol. 57, pp. 101–126.10.1007/BF00035714 ↗
11. Prime, M. B., 1994, “Residual Stress Measurement in Layered Media,” Ph.D. dissertation in Mechanical Engineering, University of California, Berkeley, CA.
12. Wu R. S. , and ChouY. T., 1982, “Line Force in a Two-Phase Orthotropic Medium,” ASME Journal of Applied Mechanics, Vol. 49, pp. 55–61.10.1115/1.3162071 ↗