On the Mechanism of Fracture in Grey Cast Iron
Source abstract
Abstract
This paper presents the results of both experimental and analytical investigations into the conditions of failure for lamellar-graphite case iron under various modes of loading. The orientation of fracture planes is experimentally determined and surfaces of fracture zones are carefully examined with the help of a scanning electron microscope. While fracture for a tensile test takes place along its cross section, fracture in the compression test is herein shown to insist on developing along a plane inclined at some 55 to 65 deg to the cross section, irrespective of notches or grooves intentionally machined to persuade fracture to pursue certain preassigned paths. For the case of uniaxial compression, the present analysis correlates the ratio of compressive to tensile strengths to both rupture and friction angles. Relevant values are in conformity with earlier findings.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Metal Forming Simulation Techniques · Metallurgy and Material Forming · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Qatar University, Doha, Qatar, Arabian Gulf
Zagazig University, Egypt
References
Reference metadata was not supplied for this record.