Holographic Evaluation of Edge Delamination in Bars Bonded to a Rigid Support With Foam-Adhesive
Source abstract
Abstract
When a bar having one end bonded to a rigid support with foam-adhesive is loaded, the high peeling stresses at the bonded edge foster edge delamination along the interface of bonding. Upon inspection by double exposure holography, with an incremental point load applied at the free end of the bar between exposures, the indistinct fringe perturbation and the unknown resilience of the foam-adhesive (quantified by its foundation modulus) impede unambiguous evaluation of the condition of adhesion. This paper describes a simple method for rapid detection and assessment of artificially created edge delamination in such bar structures. The theoretical analysis elucidates the suitability of modelling the bar as partially clamped, and having an equivalent slope at its support related to the foundation modulus. Two dimensionless parameters are defined, which have between them a linear relationship for a nondelaminated bonding but a nonlinear relationship for a delaminated one. Finally, a simple iterative procedure is described for estimating the delaminated length without having to predetermine the elasticity of the support.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Optical measurement and interference techniques · Ultrasonics and Acoustic Wave Propagation · Structural Health Monitoring Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Mechanical and Production Engineering, National University of Singapore, Kent Ridge, Singapore 0511
References (9)
Show source-provided references
1. Erf, R. K., 1974, Holographic Nondestructive Testing, Academic Press, New York.
2. Goland M. , and ReissnerE., 1944, “Stresses in Cemented Joints,” ASME J. Appl. Mech., Vol. 66, pp. A17–A27A17–A27.10.1115/1.4009336 ↗
3. Hete´nyi, M., 1946, Beams On Elastic Foundation, University of Michigan Press, Ann Arbor.
4. Liechti, K. M., and Hanson, E. C, 1988, “An Examination of Mixed-Mode Debonding in the Blister Test,” W. S. Johnson, (ed.), Adhesively Bonded Joints: Testing, Analysis, and Design, ASTM Special Technical Publication 981.10.1520/STP30324S ↗
5. Rubayi N. A. , and LiewS. H., 1989, “Vacuum Stressing Technique for Composite Laminates Inspection by Optical Method,” Exp. Tech., Vol. 13, pp. 17–20.10.1111/j.1747-1567.1989.tb00980.x ↗
6. Shang H. M. , TohS. L., ChauF. S., TayC. J., and TayT. E., 1991, “Holographic Inspection of Laminated Plates Containing Two Fully-Overlapping Identical Debonds,” J. Nondestr. Evaluation, Vol. 10(1), pp. 7–17.10.1007/BF00567073 ↗
7. Shang H. M. , LwinM., and TayT. E., 1994, “Holographic Inspection of Plates Containing Areas of Localized Thickness Variation,” ASME JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY, Vol. 116 (2), pp. 233–245.10.1115/1.2904267 ↗
8. Shang, H. M., Tham, L. M., and Chau, F. S., 1995, “Shearographic and Holographic Assessment of Defective Laminates with Bond-Lines of Different Elasticities,” ASME JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY, Vol. 117.10.1115/1.2804546 ↗
9. Vest, C. M., 1979, Holographic Interferometry, John Wiley, New York.10.1063/1.2995245 ↗