A Finite-Element Work-Hardening Plasticity Model of the Uniaxial Compression and Subsequent Failure of Porous Cylinders Including Effects of Void Nucleation and Growth—Part II: Localization and Fracture Criteria
Source abstract
Abstract
In Part I [1] of this paper, Gurson’s mixed hardening plasticity model with strain and stress-controlled nucleations, was used in a large deformation finite element program to study the plastic flow and damage in the uniaxial compression of cylinders under sticking friction. Due to low stress triaxiality at the bulge of the cylinders, it was found that localization may occur before void coalescence. In this paper, necessary conditions of localizations are analyzed for the axial compression of porous cylinders under sticking friction. Shear band type of localization with a normal mode of fracture has been predicted for the majority of the cases studied. Various existing localization conditions and fracture criteria are assessed using the results from the simulation. The maximum shear stress at failure is approximately constant and a constant critical damage can not be found.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Metal Forming Simulation Techniques · Metallurgy and Material Forming · High-Velocity Impact and Material Behavior
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Mechanical Engineering, University of Alaska Fairbanks, AK 99775
References (29)
Show source-provided references
1. Lee J. H. , and ZhangY., 1994, “A Finite-Element Work-Hardening Plasticity Model of the Uniaxial Compression and Subsequent Failure of Porous Cylinders Including Effects of Void Nucleation and Growth Part I: Plastic Flow and Damage,” ASME JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY, Vol. 116, pp. 69–79.10.1115/1.2904257 ↗
2. Devaux J. , GelinJ. C., OudinJ., and RavalardY., 1984, “Theoretical Analysis and Experimental Applications of Barrelling and Folding in Cylinder Upsetting Tests,” Int. J. Mech. Sci., Vol. 26, pp. 555–572.10.1016/0020-7403(84)90010-9 ↗
3. Kudo H. , and AoiK., 1967, “Effect of Compression Test Condition Upon Fracturing of a Medium Carbon Steel,” J. Japan Soc. Tech. Plasticity, Vol. 8, pp. 17–27.
4. Kobayashi S. , 1970, “Deformation Characteristics and Ductile Fracture of 1040 Steel in Simple Upsetting of Solid Cylinders and Rings,” ASME J. Engr. Ind., Vol. 92b, pp. 391–399.10.1115/1.3427752 ↗
5. Kivivouri S. , and SulonenM., 1978, “Formability Limits and Fracturing Modes of Uniaxial Compression Specimens,” CIRP Annals, Vol. 27, pp. 141–145.
6. Sowerby R. , O’ReillyI., ChandrasekaranN., and DungN. L., 1984, “Materials Testing for Cold Forging,” ASME JOURNAL OP ENGINEERING MATERIALS AND TECHNOLOGY, Vol. 106, pp. 101–106.10.1115/1.3225668 ↗
7. Sowerby R. , and ChandrasekaranN., 1984, “The Cold Upsetting and Free Surface Ductility of Some Commercial Steels,” J. Applied Metalworking, Vol. 3, pp. 257–263.10.1007/BF02833653 ↗
8. Sowerby R. , and ChandrasekaranN., 1986, “The Prediction of Damage Accumulation when Upsetting AISI 1045 Steel Specimens, Based on McClintock’s Model,” Mater. Sci. Engr., Vol. 79, pp. 27–35.10.1016/0025-5416(86)90383-6 ↗
9. Lee P. W. , and KuhnH. A., 1973, “Fracture in Cold Upset Forging—A Criterion and Model,” Metall. Trans., Vol. 4, pp. 969–974.10.1007/BF02645597 ↗
10. Kuhn H. A. , LeeP. W., and ErturkT., 1973, “A Fracture Criterion for Cold Forming,” ASME JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY, Vol. 95, pp. 213–218.10.1115/1.3443155 ↗
11. Vujovic V. , and ShabaikA. H., 1986, “A New Workability Criterion for Ductile Metals,” ASME JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY, Vol. 108, pp. 245–249.10.1115/1.3225876 ↗
12. Cockcroft M. G. , and LathamD. J., 1968, “Ductility and Workability of Metals, J. Inst. Metals, Vol. 96, pp. 33–39.
13. Oyane M. , 1972, “Criteria of Ductile Fracture Strain,” Bull., JSME, Vol. 15, pp. 1507–1513.10.1299/jsme1958.15.1507 ↗
14. McClintock F. A. , 1968, “A Criterion for Ductile Fracture by the Growth of Holes,” ASME J. Appl. Mech., Vol. 35, pp. 363–371.10.1115/1.3601204 ↗
15. Lee, J. H., 1990, Final Report to NSF, MSM-8722786.
16. Rudnicki J. W. , and RiceJ. R., 1975, “Conditions for the Localization of Deformation in Pressure-Sensitive Dilatant Materials,” J. Mech. Phys. Solids, Vol. 23, pp. 371–394.10.1016/0022-5096(75)90001-0 ↗
17. Ortiz M. , LeroyY., and NeedlemanA., 1987, “A Finite Element Method for Localized Failure Analysis,” Computer Methods Appl. Mech. Eng., Vol. 61, pp. 89–124.10.1016/0045-7825(87)90004-1 ↗
18. Hartley P. , CliftS. E., Salimi-NaminJ., SturgessC. E. N., and PillingerI., 1989, “The Prediction of Ductile Fracture Initiation in Metal Forming Using a Finite Element Method and Various Fracture Criteria,” Res. Mechanica, Vol. 28, pp. 269–293.
19. Rice J. R. , and TraceyD. M., 1969, “On the Ductile Enlargement of Voids in Triaxial Stress Fields,” J. Mech. Phys. Solids, Vol. 17, pp. 201–217.10.1016/0022-5096(69)90033-7 ↗
20. Hill R. , “On Discontinuous Plastic States, with Special Reference to Localized Necking in Thin Sheets,” J. Mech. Phys. Solids, Vol. 1, pp. 19–30.10.1016/0022-5096(52)90003-3 ↗
21. Ettouney O. , and HardtD. E., 1983, “A Method for In-Process Failure Prediction in Cold Upset Forging,” ASME J. Engr. Ind., Vol. 105, pp. 161–167.10.1115/1.3185883 ↗
22. Osakada, K., and Mori, K., 1978, “Prediction of Ductile Fracture in Cold Forging,” Annals of the CIRP, pp. 135–139.
23. Tvergaard V. , and NeedlemanA., 1984, “Analysis of the Cup-Cone Fracture in a Round Tensile Bar,” Acta Metall., Vol. 32, pp. 157–169.10.1016/0001-6160(84)90213-X ↗
24. Becker R. , NeedlemanA., RichmondO., and TvergaardV., “Void Growth and Failure in Notched Bars,” J. Mech. Phys. Solids, Vol. 36, pp. 317–351.10.1016/0022-5096(88)90014-2 ↗
25. Aoki S. , KishimotoK., ToshidaT., and SakataM., 1987, “A Finite Element Study of the Near Crack Tip Deformation of a Ductile Material Under Mixed Mode Loading,” J. Mech. Phys. Solids, Vol. 35, pp. 431–455.10.1016/0022-5096(87)90046-9 ↗
26. Needleman A. , and TvergaardV., 1987, “An Analysis of Ductile Rupture Modes at a Crack Tip,” J. Mech. Phys. Solids, Vol. 35, pp. 151–183.10.1016/0022-5096(87)90034-2 ↗
27. Thomason P. F. , 1969, “Tensile Plastic Instability and Ductile Fracture Criteria in Uniaxial Compression Tests,” Int. J. Mech. Sci., Vol. 11, pp. 187–198.10.1016/0020-7403(69)90004-6 ↗
28. Thomason P. F. , 1968, “The Use of Pure Aluminum as an Analogue for the History of Plastic Flow, in Studies of Ductile Fracture Criteria in Steel Compression Specimens,” Int. J. Mech. Sci., Vol. 10, pp. 501–518.10.1016/0020-7403(68)90031-3 ↗
29. Darvas Z. , 1985, “The Forming Limit and Fracture Mode in Cold Upsetting,” Mater. Sci. Engr., Vol. 70, pp. 101–110.10.1016/0025-5416(85)90271-X ↗