Influence of Cathodic and Internal Trapped Hydrogen on Fatigue Crack Growth in a NiCrMoV Structural Steel
Source abstract
Abstract
Fatigue crack propagation has been investigated in a NiCrMoV structural steel in air or in electrolytic hydrogen charging environments. The behavior of this steel containing internal trapped hydrogen absorbed during the steelmaking processes was also considered. Hydrogen, both internal and adsorbed by the environment, causes accelerated crack growth over the entire stress-intensity factor range. As the loading conditions are varied, two different damage mechanisms, triggered by hydrogen, are observed, and are separated by a transition zone where the fatigue crack growth rate is constant. The results of the fatigue tests and of a fractographic analysis suggest that the phenomenon is controlled by the stress distribution at the crack tip, and that a transition occurs when the cyclic plastic zone size at the crack tip is larger than the prior austenite grain size.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Material Properties and Failure Mechanisms · Fatigue and fracture mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Istituto di Meccanica applicata alle macchine, University of Genoa, Via all’ Opera Pia, 15/A, 16145 Genoa, Italy
References
Reference metadata was not supplied for this record.