journal article·2019-01Open access

Performance analysis of a heat transfer and sub-grid chemical reaction distributed activation energy model for fire simulations

Abhishek Bhargava, Patrick Van Hees, Bjarne Husted, Antonio Rodolfo Junior, Corina Neumeister

Journal of Fire Sciences· Volume 37· Issue 1

Abstract

A heat transfer and sub-grid chemical reaction kinetic model for solid phase combustion of a charring polymer is presented based on distributed reactivity modeling approach. The model is used to compute flammability parameters of a polymer sheet of a given thickness to simulate test results of a cone calorimeter experiment. Comparison of model simulations with cone calorimeter test data shows that it gives reasonable prediction of mass loss rate, heat release rate, and total heat released of poly-vinyl chloride (PVC) and ethyl vinyl acetate–aluminum tri-hydroxide (EVA-ATH). The solution of governing equations with the current form of distributed reactivity modeling model poses numerical challenges due to appearance of a double integral in the chemical reaction model. Hence, an analytical approximation has been derived to solve mass and energy conservation equations representing the model. Simulation results indicate that with the approximated form of the distributed reactivity modeling model, along with the input parameters retrieved from literature, the model shows comparatively good predictions for EVA-ATH for mass loss rate, heat release rate, and total heat released, but calculates under-predicted values for PVC.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Flame retardant materials and properties · Fire dynamics and safety research · Energetic Materials and Combustion

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

DBI—Danish Institute of Fire and Security Technology, Hvidovre, Denmark

Division of Fire Safety Engineering, Lund University, Lund, Sweden

Braskem SA, Vinyls Business Unit, Sao Paulo, Brazil

Nabaltec AG, Research and Development (Cables and Polymers) Schwandorf, Germany

Funding

FP7 People: Marie-Curie Actions

References (51)

Show source-provided references
1. 10.6028/NIST.SP.1018e610.6028/NIST.SP.1018e6 ↗
2. 10.1016/j.firesaf.2009.03.01110.1016/j.firesaf.2009.03.011 ↗
3. 10.1016/j.combustflame.2010.03.01110.1016/j.combustflame.2010.03.011 ↗
4. 10.1016/j.tca.2014.07.00910.1016/j.tca.2014.07.009 ↗
5. 10.1016/j.polymdegradstab.2015.01.00610.1016/j.polymdegradstab.2015.01.006 ↗
6. Valencia LB. · 2010
7. Matala A. Methods and applications of pyrolysis modelling for polymeric materials. Aalto University, 2013, https://www.vtt.fi/inf/pdf/science/2013/S44.pdf
8. 10.3801/IAFSS.FSS.9-114110.3801/IAFSS.FSS.9-1141 ↗
9. 10.1016/j.combustflame.2008.11.01010.1016/j.combustflame.2008.11.010 ↗
10. 10.1016/j.firesaf.2013.03.01210.1016/j.firesaf.2013.03.012 ↗
11. 10.1002/fam.213610.1002/fam.2136 ↗
12. 10.1177/073490411245301010.1177/0734904112453010 ↗
13. 10.1016/j.firesaf.2013.09.00710.1016/j.firesaf.2013.09.007 ↗
14. 10.1002/1097-0126(200010)49:10<1133::AID-PI519>3.0.CO;2-E10.1002/1097-0126(200010)49:10<1133::AID-PI519>3.0.CO;2-E ↗
15. 10.1016/j.fuproc.2015.04.01410.1016/j.fuproc.2015.04.014 ↗
16. 10.1016/j.firesaf.2009.05.00310.1016/j.firesaf.2009.05.003 ↗
17. 10.1088/1742-6596/395/1/01201210.1088/1742-6596/395/1/012012 ↗
18. 10.1016/j.tca.2011.03.03410.1016/j.tca.2011.03.034 ↗
19. 10.1016/j.rser.2014.04.05210.1016/j.rser.2014.04.052 ↗
20. 10.1016/j.biortech.2010.08.07910.1016/j.biortech.2010.08.079 ↗
21. 10.1016/j.biortech.2010.11.07310.1016/j.biortech.2010.11.073 ↗
22. 10.1016/j.enconman.2017.02.01310.1016/j.enconman.2017.02.013 ↗
23. 10.1016/j.fuel.2017.06.07810.1016/j.fuel.2017.06.078 ↗
24. 10.1016/j.jaap.2015.11.01510.1016/j.jaap.2015.11.015 ↗
25. 10.1016/j.fuel.2003.09.02410.1016/j.fuel.2003.09.024 ↗
26. 10.1016/j.fuel.2011.02.00910.1016/j.fuel.2011.02.009 ↗
27. 10.1016/0360-1285(93)90022-710.1016/0360-1285(93)90022-7 ↗
28. 10.1016/j.pecs.2006.12.00110.1016/j.pecs.2006.12.001 ↗
29. 10.1002/cjce.545072041410.1002/cjce.5450720414 ↗
30. 10.1016/S0141-3910(01)00048-910.1016/S0141-3910(01)00048-9 ↗
31. 10.3390/ma811542810.3390/ma8115428 ↗
32. 10.1016/j.combustflame.2006.04.01310.1016/j.combustflame.2006.04.013 ↗
33. ASTM E1641-16. Standard test method for decomposition kinetics by thermogravimetry using the Ozawa/Flynn/Wall method, 2016, https://www.astm.org/standards/e1641.htm
34. ASTM E698-18. Standard test method for kinetic parameters for thermally unstable materials using differential scanning calorimetry and the Flynn/Wall/OzawaMethod, http://www.astm.org/cgi-bin/resolver.cgi?E698
35. 10.1016/j.jaap.2016.02.00710.1016/j.jaap.2016.02.007 ↗
36. DiNenno PJ
37. 10.1039/c3gc36958g10.1039/c3gc36958g ↗
38. Bhargava A · 107
39. 10.1016/j.combustflame.2007.07.02010.1016/j.combustflame.2007.07.020 ↗
40. 10.1002/app.3144210.1002/app.31442 ↗
41. ISO 5660-1:2015. Reaction—to—fire tests—heat release, smoke production and mass loss rate—part 1: heat release rate (cone calorimeter method) and smoke production rate (dynamic. measurement), 2015, https://www.iso.org/standard/57957.html
42. 10.1016/j.polymdegradstab.2016.01.00710.1016/j.polymdegradstab.2016.01.007 ↗
43. 10.1021/ef00048a00110.1021/ef00048a001 ↗
44. 10.1016/j.polymdegradstab.2016.04.01610.1016/j.polymdegradstab.2016.04.016 ↗
45. 10.1007/s10910-006-9130-910.1007/s10910-006-9130-9 ↗
46. 10.1016/0379-7112(95)00030-510.1016/0379-7112(95)00030-5 ↗
47. 10.1016/j.combustflame.2016.04.00910.1016/j.combustflame.2016.04.009 ↗
48. 10.1016/S0379-7112(96)00033-110.1016/S0379-7112(96)00033-1 ↗
49. 10.1177/002199830934463710.1177/0021998309344637 ↗
50. 10.1002/fam.77810.1002/fam.778 ↗
51. Spiegel MR. · 1998