journal article·2020-03

A reappraisal of the nominal curvature method in the fire design of reinforced concrete columns

Patrick Bamonte

Journal of Fire Sciences· Volume 38· Issue 2
Publisher page

Abstract

A reappraisal of the method based on nominal curvature for designing reinforced concrete columns in fire is proposed, with the focus on the validation of an alternative and widely accepted way of applying the method, which differs from the current provisions of EN 1992-1-2. To this end, a systematic comparison between experimental and numerical results is carried out on a database consisting of 74 columns tested in different laboratories. The comparison shows that the method based on nominal curvature yields conservative estimates of the time to failure. Moreover, the numerical results obtained are reasonably close to those obtained by means of finite element analysis. By contrast, if the method is applied in combination with the simplified methods introduced in EN 1992-1-2, the numerical results are not conservative, with a significant overestimation of the bearing capacity of the columns, and of the time to failure, mainly because of the overestimation of the stiffness by the simplified methods.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Fire effects on concrete materials · Structural Behavior of Reinforced Concrete · Structural Response to Dynamic Loads

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Civil and Environmental Engineering, Politecnico di Milano, Milano, Italy

References (18)

Show source-provided references
1. Hass R. · 1986
2. Lie TT · ACI Struct J · 1988 · 90 · 52
3. Lie TT · 1988
4. Lie TT · ACI Mater J · 1991 · 88 · 84
5. Dotreppe J-C · ACI Struct J · 1999 · 96 · 9
6. 10.1016/j.firesaf.2014.11.01410.1016/j.firesaf.2014.11.014 ↗
7. 10.1016/j.firesaf.2019.01.00710.1016/j.firesaf.2019.01.007 ↗
8. EN 1992-1-2:2004. Eurocode 2: design of concrete structures – part 1-2: general rules – structural fire design, 2004.
9. Riva P. · 2008 · 33
10. 10.1061/(ASCE)ST.1943-541X.000030710.1061/(ASCE)ST.1943-541X.0000307 ↗
11. EN 1992-1-1:2004. Eurocode 2: design of concrete structures – part 1-1: general rules and rules for buildings, 2004.
12. 10.1142/782810.1142/7828 ↗
13. Bamonte P. · 369
14. 10.1680/stco.2008.9.1.1910.1680/stco.2008.9.1.19 ↗
15. EN 1991-1-2:2004. Eurocode 1: actions on structures – part 1-2: general actions-actions on structures exposed to fire, 2004.
16. 10.1002/bate.20190002110.1002/bate.201900021 ↗
17. 10.1016/j.firesaf.2016.12.00310.1016/j.firesaf.2016.12.003 ↗
18. Achenbach M · Fire Safe J · 2016 · 87 · 82