Thermal analysis of a pool fire test in a steel container
Source abstract
Abstract
A pool fire test was conducted in an uninsulated steel container under low ambient temperature condition, at −20°C. The heat balance of the enclosure fire was analyzed. The size of the container was 12 m× 2.4 m and 2.4 m high, and it was made of 3-mm-thick steel. During the fire test, the fuel mass loss rate was recorded and the temperatures at different positions were measured with high-temperature thermocouples and plate thermometers. The fire scenario was simulated by using fire dynamics simulator software, and the simulated and measured results were compared. The coarse high-temperature thermocouple responded slower, and therefore, temperature measured by the high-temperature thermocouple was corrected to eliminate the effect of the thermal inertia. Furthermore, a simple two-zone model was proposed for estimating gas temperature in the enclosure of the highly conductive steel walls assuming a constant combustion rate. The convective and radiative heat transfer resistances at the inside and outside surfaces of the enclosure were analyzed.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Fire dynamics and safety research · Combustion and Detonation Processes · Fire effects on ecosystems
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Division of Structural and Construction Engineering, Luleå University of Technology, Luleå, Sweden
State Key Laboratory of Fire Science, University of Science and Technology of China, Hefei, China
SP Technical Research Institute of Sweden, Borås, Sweden
References (23)
Show source-provided references
1. 10.1177/073490410706730010.1177/0734904107067300 ↗
2. 10.1016/j.firesaf.2005.02.00210.1016/j.firesaf.2005.02.002 ↗
3. 10.1177/073490410809533910.1177/0734904108095339 ↗
4. Blinov IV, Khudiakov GN. Diffusive burning of liquids. Report No. T-1490a-c, ASTIA, AD296762, US Army Engineering and Research Laboratories, Virginia, USA, 1961.
5. 10.3801/IAFSS.FSS.3-42510.3801/IAFSS.FSS.3-425 ↗
6. 10.1016/j.proci.2008.06.03310.1016/j.proci.2008.06.033 ↗
7. 10.1016/j.fuel.2011.03.03510.1016/j.fuel.2011.03.035 ↗
8. 10.1016/j.jhazmat.2008.11.05610.1016/j.jhazmat.2008.11.056 ↗
9. 10.1177/073490410706235710.1177/0734904107062357 ↗
10. 10.1177/104239150606490810.1177/1042391506064908 ↗
11. 10.1007/s10694-011-0230-010.1007/s10694-011-0230-0 ↗
12. 10.1016/j.jhazmat.2011.01.12210.1016/j.jhazmat.2011.01.122 ↗
13. McGrattan K, McDermott R, Hostikka S, Fire dynamics simulator (version 5): user’s guide. NIST Special Publication 1019-5, 2010.
14. 10.1177/104239150504730410.1177/1042391505047304 ↗
15. 10.1016/j.firesaf.2006.08.00710.1016/j.firesaf.2006.08.007 ↗
16. Wickström U · 2008 · 21
17. Wickström U · 2010 · 951
18. 10.1016/j.firesaf.2006.08.00810.1016/j.firesaf.2006.08.008 ↗
19. 10.1002/0470091150.ch710.1002/0470091150.ch7 ↗
20. DiNenno PJ · 2002 · A/34
21. Holman JP · 2001 · 336
22. Karlsson B · 2000
23. Walton WD · 2002 · 3/177