journal article·1992-05

The OSU Heat Release Unit as a Screening Tool for California TB 133

James A. Gallagher, Theodore M. Smiecinski, Oscar M. Grace

Journal of Fire Sciences· Volume 10· Issue 3
Publisher page

Abstract

The California TB 133 (TB 133) full-scale burn test was adopted by Illinois and Minnesota in 1990 as a performance standard for furniture to be used in places of public occupancy. TB 133 will become effective in California on January 1,1992 and is under consideration in Ohio and several other states. Since full-scale burn tests are expensive, we embarked on a program to deter mine if the OSU Heat Release Unit could be used as a screening test for TB 133. The percentage weight loss of foam/fabric composites after ten minutes in the OSU Unit at a radiant heat flux of 1.0 Watt/cm 2 appears to be a good predictor of TB 133 performance. A series of 39 upholstery fabric/melamine-modified polyurethane foam composites were tested in BASF Corporation's Wyandotte, Michigan TB 133 burn facility and in our OSU Heat Release Unit. We found: · 11 of 12 samples which clearly failed the Cal TB 133 test lost over 40% of their weight at a heat flux of 1.0 Watt/cm 2 in the OSU test. · 22 of 23 samples which clearly passed the Cal TB 133 test lost less than 40% of their weight at 1.0 Watt/cm 2 . · Four samples marginally passed the Cal TB 133 test and their weight loss values could not be correlated. The TB 133 criteria adopted in mid 1990 was used for this series of tests rather than the newer criteria using oxygen consumption calorimetry. All of the TB 133 failures in this study were due to weight loss using fabric-covered foam cushions on a metal test frame. No side arms were used. Work is continu ing to determine whether this correlation can be extended to other foam/fabric combinations.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Structural Analysis of Composite Materials · Flame retardant materials and properties · Fire dynamics and safety research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

BASF Corporation 1419 Biddle Avenue Wyandotte, MI 48192

References (4)

Show source-provided references
1. Szabat J.F. D.B. Parrish and W.E. Zirk. 1988. "Development of a Classification System for Combustion Modified Flexible Polyurethane Foam Based on the OSU Calorimeter " Proceedings of the SPI 31st Annual Technical/Marketing Conference (October 1988) pp. 190-200.
2. Gallagher J.A. and W.E. Zirk. 1990. "Combustion Characteristics of Polyurethane Foams Covered with Fabrics-An SPI Research Project " Proceedings of the SPI 33rd Annual Technical/Marketing Conference (October 1990) pp. 147-158.
3. United States Department of Commerce National Institute of Standards and Technology Gaithersburg Maryland 20899 USA.
4. 1990. "Flammability Test Procedure for Seating Furniture for Use in Public Occupancies " California Bureau of Home Furnishings Technical Bulletin Number 133.