Lithium salt-induced microphase separation in photopolymerized solid polymer electrolytes
Source abstract
Abstract
• Nanostructured SPEs fabricated by salt-induced microphase separation. • The nanostructure ultimately influences the strength and conductivity of the SPEs. • Up to a 7-fold enhancement in storage moduli compared to the neat POEGA matrix. • SPE's properties similar to crosslinked one with added benefit of recyclability. This paper reports on lithium salt-induced microphase separation of linear and star block copolymers (BCPs) dispersed in monomer to produce solid polymer electrolytes (SPEs). The proposed one-step photopolymerization methodology uses pre-synthesized BCPs of Poly (styrene- co -benzyl methacrylate)- b -Poly [oligo(ethylene glycol) methyl ether acrylate] (P(S- co -BzMA)- b -POEGA) solubilized with lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) in oligo (ethylene glycol) methyl ether acrylate (OEGA). The resulting kinetically arrested glassy nano-domains of P(S- co -BzMA) are later fixed during the POEGA homopolymer matrix photopolymerization. A variety of morphologies can be produced by adjusting lithium salt content and BCP architectures, i.e. , linear or star-like. Embedding the BCP nanostructures in the POEGA matrix acted as physical crosslinking that enhances the mechanical strength by a factor of seven, compared to un-crosslinked POEGA, without sacrificing on ionic conductivity. Remarkably, these innovative materials not only match the mechanical properties and conductivity of traditional cross-linked POEGA-based SPEs, but also open a valuable way towards recyclability.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced Battery Materials and Technologies · Advancements in Battery Materials · Chemical Synthesis and Characterization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. PEO based polymer in plastic crystal electrolytes for room temperature high-voltage lithium metal batteries
2. Beyond PEO—alternative host materials for Li + -conducting solid polymer electrolytes10.1016/j.progpolymsci.2017.12.004 ↗
3. Lithium metal stability in batteries with block copolymer electrolytes10.1149/2.030303jes ↗
4. Poly(Ethylene Oxide)-based electrolyte for solid-State-lithium-batteries with high voltage positive electrodes: evaluating the role of electrolyte oxidation in rapid cell failure10.1038/s41598-020-61373-9 ↗
5. How does nanoscale crystalline structure affect ion transport in solid polymer electrolytes?10.1021/ma500734q ↗
6. A systematic study of vinyl ether-based poly(Ethylene Oxide) side-chain polymer electrolytes10.1021/acsapm.0c01398 ↗
7. Poly(ethylene oxide)-based block copolymer electrolytes for lithium metal batteries10.1002/pi.5677 ↗
8. Organizing thermodynamic data obtained from multicomponent polymer electrolytes: salt-containing polymer blends and block copolymers10.1002/polb.24800 ↗
9. Melt-formable block copolymer electrolytes for lithium rechargeable batteries
10. Poly(benzyl methacrylate)-poly[(oligo ethylene glycol) methyl ether methacrylate] triblock-copolymers as solid electrolyte for lithium batteries10.1016/j.ssi.2018.04.006 ↗
11. d8-poly(methyl methacrylate)-poly[(oligo ethylene glycol) methyl ether methacrylate] tri-block-copolymer electrolytes: morphology, conductivity and battery performance10.1016/j.polymer.2017.10.044 ↗
12. Block copolymer electrolytes for lithium metal batteries: strategies to boost both ionic conductivity and mechanical strength
13. Block copolymer electrolytes for rechargeable lithium batteries10.1002/polb.23404 ↗
14. Optimization of block copolymer electrolytes for lithium metal batteries10.1021/acs.chemmater.5b01273 ↗
15. High-modulus, high-conductivity nanostructured polymer electrolyte membranes via polymerization-induced phase separation10.1021/nl4034818 ↗
16. Robust polymer electrolyte membranes with high ambient-temperature lithium-ion conductivity via polymerization-induced microphase separation10.1021/acsami.7b02514 ↗
17. 3D Printing nanostructured solid polymer electrolytes with high modulus and conductivity10.1002/adma.202204816 ↗
18. In Situ fabrication of quasi-solid polymer electrolytes for lithium metal battery via photopolymerization-induced microphase separation10.1021/acsami.4c15921 ↗
19. Ionic conductivity, capacitance, and viscoelastic properties of block copolymer-based ion gels10.1021/ma102435a ↗
20. Phase behavior and ionic conductivity of concentrated solutions of polystyrene-poly(ethylene oxide) diblock copolymers in an ionic liquid10.1021/am900555f ↗
21. Lithium salt-induced microstructure and ordering in diblock copolymer/homopolymer blends10.1021/acs.macromol.6b00995 ↗
22. Thermoplastic elastomer obtained by photopolymerization-induced concomitant macrophase and microphase separations10.1002/pol.20240079 ↗
23. In situpolymerization process: an essential design tool for lithium polymer batteries10.1039/D0EE03527K ↗
24. Improved solid electrolyte conductivity via macromolecular self-assembly: from linear to star comb-like P(S-co-BzMA)-b-POEGA block copolymers10.1021/acsami.2c22766 ↗
25. Hierarchically self-organized filler particles in polymers: cascade evolution of dissipative structures to ordered structures10.1038/s41428-018-0147-2 ↗
26. Analysis of small angle neutron scattering spectra from polydisperse interacting colloids10.1063/1.446055 ↗
27. Analysis of classical statistical mechanics by means of collective coordinates10.1103/PhysRev.110.1 ↗
28. Exact solution of the Percus-Yevick integral equation for hard spheres10.1103/PhysRevLett.10.321 ↗
29. Monitoring the transition from spherical to polymer-like surfactant micelles using small-angle X-ray scattering10.1002/anie.201406489 ↗
30. Supramolecular packing drives morphological transitions of charged surfactant micelles10.1002/anie.202004522 ↗
31. Temperature effect and thermal impact in lithium-ion batteries: a review10.1016/j.pnsc.2018.11.002 ↗
32. Polymer electrolytes
33. Atomistic description of ionic diffusion in PEO–LiTFSI: effect of temperature, molecular weight, and ionic concentration10.1021/acs.macromol.8b01753 ↗
34. The compensation effect in the Vogel–Tammann–Fulcher (VTF) equation for polymer-based electrolytes10.1021/acs.macromol.7b00423 ↗