journal article·2024-08Open access

Digital light processing of sodium-beta-alumina ceramic electrolytes

Athanasios Goulas, Dongrui Xie, Judith Gibitz, Sina Saremi-Yarahmadi, Bala Vaidhyanathan

Abstract

• Monolithic sodium-beta-alumina solid-state electrolytes are being additively manufactured via digital light processing for the first time. • 3D printed samples achieved ionic conductivities of σ RT = 0.001 S·cm -1 at RT, σ 300 = 0.18 S·cm -1 at 300 °C and an activation energy of e a = 0.38 eV. • Sintering at 1580 °C for 5 min lead to sintered bodies of near full density (98%) together with a high fraction of the β’’ rhombohedral phase at 91 wt.%. • It is shown that digital light processing holds great potential for shaping complex-shaped monolithic solid-state electrolyte structures for future applications in energy storage. Solid-state electrolyte structures using sodium-beta-alumina oxide ceramics, have been fabricated for the first time, using digital light processing; a vat photopolymerisation additive manufacturing process. Green bodies were shaped using a high solids loading ceramic resin of 46 vol.% (72 wt.%) and were then thermally binder removed and sintered. Conventionally sintered at 1580 °C for 5 min, additively manufactured electrolyte test samples exhibited an ionic conductivity of σ = 0.18 S·cm -1 at 300 °C, an activation energy of conduction E a = 0.38 eV and density of ρ = 3.19 ± 0.01 g·cm -3 (relative density 98%) along with a retention of 91 wt.% of the desirable β’’ rhombohedral phase. Results suggest that digital light processing of sodium polyaluminates is a very promising approach for manufacturing geometrically complex monolithic ceramic electrolytes for future applications in electrochemical energy storage.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Pigment Synthesis and Properties · Ferroelectric and Piezoelectric Materials · Glass properties and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (65)

Show source-provided references
1. Energy storage technologies: an integrated survey of developments, global economical/environmental effects, optimal scheduling model, and sustainable adaption policies10.1016/j.est.2023.108694 ↗
2. Research on the integrated application of battery energy storage systems in grid peak and frequency regulation10.1016/j.est.2022.106459 ↗
3. Experimental and computational advancement of cathode materials for futuristic sodium ion batteries
4. Using earth abundant materials for long duration energy storage: electro-chemical and thermo-chemical cycling of bicarbonate/formate10.1039/D3GC00219E ↗
5. Recycling hazardous and valuable electrolyte in spent lithium-ion batteries: urgency, progress, challenge, and viable approach10.1021/acs.chemrev.3c00174 ↗
6. Research progresses of liquid electrolytes in lithium-ion batteries
7. Solid-state lithium batteries: safety and prospects10.1016/j.esci.2022.02.008 ↗
8. Recent advance on NASICON electrolyte in solid-state sodium metal batteries10.1016/j.ensm.2023.01.047 ↗
9. Solid-state Na metal batteries with superior cycling stability enabled by ferroelectric enhanced Na/Na 3 Zr 2 Si 2 PO 12 interface
10. Solid-state electrolytes for solid-state lithium-sulfur batteries: comparisons, advances and prospects10.1016/j.jechem.2022.06.035 ↗
11. Review on composite solid electrolytes for solid-state lithium-ion batteries
12. Ionic conductivity and ion transport mechanisms of solid-state lithium-ion battery electrolytes: a review10.1002/ese3.1163 ↗
13. Solid-state electrolytes for safe rechargeable lithium metal batteries: a strategic view10.1088/2752-5724/accdf3 ↗
14. Structure, properties and production of β-alumina10.1007/BF00540440 ↗
15. Analysis of c-lattice parameters to evaluate Na2O loss from and Na2O content in β’’-alumina ceramics10.1016/j.ceramint.2021.01.197 ↗
16. X-ray characterization of β- and β″-alumina10.1007/BF01748072 ↗
17. Phase relations in the system Na2O-Li2O-Al2O3
18. Phase transformation and characteristics of beta-alumina10.1016/0378-4363(88)90117-9 ↗
19. Impact of liquid phase formation on microstructure and conductivity of Li-stabilized Na-β″-alumina ceramics10.1021/acsaem.8b01715 ↗
20. Y. Sheng, P. Sarkar, P.S. Nicholson, The mechanical and electrical properties of ZrOa-Nap"-AI203 composites, 1988.
21. Mechanical and electrical properties of lithium stabilized sodium beta alumina solid electrolyte shaping by non-aqueous gelcasting10.1016/j.jeurceramsoc.2020.02.037 ↗
22. Impact of sintering conditions and zirconia addition on flexural strength and ion conductivity of Na-β”-alumina ceramics
23. Synthesis and characterization of high ionic-conductive sodium beta-alumina solid electrolyte derived from boehmite10.1007/s10854-020-04321-7 ↗
24. Anisotropic properties of Na-β″-alumina + YSZ composite synthesized by vapor phase method10.1557/jmr.2017.436 ↗
25. Effect of precursors on β-alumina electrolyte preparation10.1016/j.jeurceramsoc.2015.01.006 ↗
26. Sodium, silver and lithium-ion conducting composites, ionic conductivity and stability10.3390/cryst11030293 ↗
27. Structure and ionic conductivity of a beta-alumina-based solid electrolyte prepared from sodium polyaluminate nanopowders10.1134/S0020168515030176 ↗
28. From high- to low-temperature: the revival of sodium-beta alumina for sodium solid-state batteries
29. A comparison of the tape casting of α- and β-alumina10.1016/j.jeurceramsoc.2012.07.013 ↗
30. Synthesis, extrusion processing and ionic conductivity measurements of sodium β-alumina tubes10.2298/PAC1503131A ↗
31. Extrusion process for the manufacture of beta’’-alumina solid electrolyte tubes
32. Additive manufacturing of advanced ceramic materials10.1016/j.pmatsci.2020.100736 ↗
33. Additive manufacturing of ceramics: issues, potentialities, and opportunities10.1111/jace.13700 ↗
34. Additive manufacturing of ceramics
35. A review on additive manufacturing of ceramics
36. Additive manufacturing of ceramics : a review
37. Saha · 2021
38. Digital light processing 3D-printed ceramic metamaterials for electromagnetic wave absorption
39. Study on debinding and sintering processes for ceramics fabricated using digital light processing (DLP) 3D printing10.3390/pr10112467 ↗
40. Digital light processing of ceramic components from polysiloxanes10.1016/j.jeurceramsoc.2017.07.033 ↗
41. Additive manufacturing of ceramic components by digital light processing: a comparison between the “bottom-up” and the “top-down” approaches10.1016/j.jeurceramsoc.2019.01.044 ↗
42. Digital light processing of ceramics: an overview on process, materials and challenges
43. Theoretical prediction and experimental validation of the digital light processing (DLP) working curve for photocurable materials
44. Resistivity-microstructure relations in lithia-stabilized polycrystalline β”-alumina10.1111/j.1151-2916.1978.tb09292.x ↗
45. MSLattice: a free software for generating uniform and graded lattices based on triply periodic minimal surfaces
46. Photopolymerization-based additive manufacturing of ceramics: a systematic review10.1007/s40145-021-0468-z ↗
47. Design of a shaping system for stereolithography with high solid loading ceramic suspensions10.1089/3dp.2017.0065 ↗
48. A review on the rheological behavior and formulations of ceramic suspensions for vat photopolymerization10.1016/j.ceramint.2021.01.031 ↗
49. Ceramic stereolithography: additive manufacturing for ceramics by photopolymerization10.1146/annurev-matsci-070115-031841 ↗
50. Photopolymerization of ceramic resins by stereolithography process: a review10.3390/app12073591 ↗
51. The 3D printing behavior of photocurable ceramic/polymer composite slurries prepared with different particle sizes10.3390/nano12152631 ↗
52. J.H. Lee, R.K. Prud'homme, I.A. Aksay, Cure depth in photopolymerization: experiments and theory, 2001.10.1557/JMR.2001.0485 ↗
53. Fabrication of zirconia all-ceramic crown via DLP-based stereolithography10.1111/ijac.13441 ↗
54. Effect of dispersants on structural integrity of 3D printed ceramics10.1111/ijac.13965 ↗
55. Effect of non-reactive diluent on defect-free debinding process of 3D printed ceramics
56. Large planar Na-β-Al2O3 solid electrolytes for next generation Na-batteries10.3390/ma13020433 ↗
57. Study of sodium polyaluminate reaction mechanisms with an air atmosphere10.1007/s11148-012-9486-2 ↗
58. Effect of excess Na2O on the sintering behavior and properties of sodium beta-alumina solid electrolyte
59. Advanced materials for sodium-beta alumina batteries: status, challenges and perspectives10.1016/j.jpowsour.2009.11.120 ↗
60. Hybrid electrolytes with 3D bicontinuous ordered ceramic and polymer microchannels for all-solid-state batteries10.1039/C7EE02723K ↗
61. Digital light processing-based multi-material bioprinting: processes, applications, and perspectives10.1002/jbm.a.37473 ↗
62. Automated storage and active cleaning for multi-material digital-light-processing printer10.1108/RPJ-08-2018-0211 ↗
63. High-efficiency high-resolution multimaterial fabrication for digital light processing-based three-dimensional printing10.1089/3dp.2018.0004 ↗
64. Perspectives on multi-material additive manufacturing10.1557/s43578-021-00388-y ↗
65. 2022 roadmap on 3D printing for energy10.1088/2515-7655/ac483d ↗