journal article·2018-07

Delta ferrite is ubiquitous in type 304 stainless steel: Consequences for magnetic characterization

C.D. Graham, B.E. Lorenz

Publisher page

Abstract

Abstract Using a vibrating-sample magnetometer with a maximum field of 20.5 kOe, we have measured over 50 samples of annealed 304 stainless steel, which is usually considered to be non-magnetic. In almost every case, we observe the presence of a small, usually less than 0.01, fraction of a ferromagnetic phase, which we believe to be equilibrium bcc delta ferrite. The consequences of this observation for the measurement and specification of the magnetic properties of annealed 304 stainless are discussed. Our measurements also establish the most likely value for the magnetic permeability of the fcc austenitic phase in 304 stainless steel austenite as 1.0033 ± 0.0003.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Magnetic Properties and Applications · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (19)

Show source-provided references
1. ASM Metals Handbook, 10th ed., 1992, vol. 1, p. 841.
2. William D. Callister, Jr. Materials Science and Engineering, an Introduction Wiley, 1985, p. 255.
3. Carpenter Technology Corp., Reading PA. (http://www.cartech.com) Technical Article “Magnetic Properties of Stainless Steels”.
4. Hull · Suppl. Weld. Res. J. · 1973 · 193s
5. Siewert · Suppl. Weld. Res. J. Dec. · 1988 · p289s
6. Kotecki · Suppl. Weld. Res. J. · 1992 · 171Ss
7. Trygve Angel · Iron Steel Inst. · 1954 · 177 · 5
8. British Stainless Steel Assoc., Stainless Steel Advisory Service Informational Sheet No. 2.81, 1 May 2000.
9. Atlas Specialty Metals (Australia) (http://www.atlassteels.com.au) Tech Note No.11 (Dec. 2008). Also available at: http://www.kimballphysics.com/multi-CF/Hardware/Technical Information.
10. ASM Metals Handbook, 9th ed. vol. 9, p. 287.
11. Rezayat · Metall. Mater. Trans. A · 2016 · 47A · 64110.1007/s11661-015-3242-4 ↗
12. Foner · Rev. Sci. Instrum. · 1959 · 30 · 54810.1063/1.1716679 ↗
13. Childress · J. Appl. Phys. · 1988 · 64 · 605910.1063/1.342154 ↗
14. These samples were provided in a form suitable for our VSM through the co-operation of Dr. Vojteh Leskovsek of the Institute of Metals and Technology, Ljubljana, Slovenia, which we greatly appreciate. See V. Leskovsek et al., Metall. Mater. Trans. A, 45A, (2014), pp. 2819–2826.10.1007/s11661-014-2213-5 ↗
15. Arpan Das · Magn. Mag. Mater. · 2013 · 36 · 232
16. G.L. Gouy, Compt. Rend. 109 (1889) p. 935. Or see B.D. Cullity, C.D. Graham, Introduction Magn. Mater. Wiley/IEEE (2009) p. 83.
17. Severn Engineering Co., Auburn AL USA (http://www.severnengineering.com).
18. Institut Dr Foerster GmbH, Reutlingen Germany (http://www.foerstergroup.com).
19. Severn Engineering technical note “History of the Severn Engineering Permeability Standards.”