Enhanced electromagnetic wave absorption properties of NiCo2 nanoparticles interspersed with carbon nanotubes
Source abstract
Abstract
Abstract The NiCo2 nanoparticles and NiCo2/carbon nanotubes (CNTs) nanohybrids were prepared by a single-model microwave heating and annealing treatment. It was found that the NiCo2 nanoparticles were evenly distributed around with CNTs. As a result, the complex permittivity of NiCo2/CNTs nanohybrids could be adjusted effectively, and achieved a well impedance matching for the microwave absorption. The dielectric loss, magnetic loss mechanism and the impedance matching were also investigated systematically. As a result, the reflection loss (RL) less than −20 dB (99% absorption) were observed at 3.7–16.5 GHz with the thickness of 1.2–4.0 mm; moreover, the maximum bandwidth of the RL values less than −10 dB (90% absorption) was 4.4 GHz (12.5–16.9 GHz), and a minimum RL value of −25.5 dB could be observed at 14.7 GHz with the thickness of 1.3 mm. These performances revealed that the NiCo2/10%CNTs nanohybrids have a great potential to be used as the lightweight microwave absorption material.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electromagnetic wave absorption materials · Advanced Antenna and Metasurface Technologies · Metamaterials and Metasurfaces Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Microwave-absorbing and mechanical properties of carbonyl-iron/epoxy-silicone resin coatings10.1016/j.jmmm.2008.07.011 ↗
2. Cross-stacking aligned carbon-nanotube films to tune microwave absorption frequencies and increase absorption intensities10.1002/adma.201403735 ↗
3. Electromagnetic field absorbing polypropylene nanocomposites with tuned permittivity and permeability by nanoiron and carbon nanotubes10.1021/jp507975r ↗
4. Electromagnetic shielding properties of MWCNT/PMMA composites in Ka-band10.1002/pssb.200982294 ↗
5. Enhanced microwave absorption property of Fe nanoparticles encapsulated within reduced graphene oxide with different thicknesses10.1021/acs.iecr.7b01732 ↗
6. Microwave absorption properties of Ni/(C, silicides) nanocapsules10.1186/1556-276X-7-238 ↗
7. Investigation on microwave absorption properties for multiwalled carbon nanotubes/Fe/Co/Ni nanopowders as lightweight absorbers10.1021/jp202078p ↗
8. Microwave absorption properties of FeNi3submicrometre spheres and SiO2@FeNi3core–shell structures10.1088/0022-3727/43/24/245003 ↗
9. Synthesis and microwave absorption properties of FeCo nanoplates10.1016/j.jallcom.2009.12.153 ↗
10. Microwave dielectric and magnetic properties of superparamagnetic 8-nm Fe3O4 nanoparticles10.1016/j.jmmm.2012.03.013 ↗
11. Controllable permittivity in 3D Fe3O4/CNTs network for remarkable microwave absorption performances10.1039/C7RA04456A ↗
12. Preparation, characterization and microwave absorption properties of electroless Ni–Co–P-coated SiC powder10.1016/j.apsusc.2008.01.076 ↗
13. Microwave-absorption properties of FeCo microspheres self-assembled by Al2O3-coated FeCo nanocapsules10.1063/1.2945639 ↗
14. Microwave absorption enhancement of multifunctional composite microspheres with spinel Fe3O4 cores and snatase TiO2 shells10.1002/smll.201102245 ↗
15. Effect of Ag substitution on the electromagnetic property and microwave absorption of LaMnO310.1016/j.jmmm.2012.05.024 ↗
16. Microwave absorption properties and mechanism of cagelike ZnO/SiO2 nanocomposites10.1063/1.2803764 ↗
17. Enhanced microwave-to-terahertz absorption in graphene10.1063/1.4944531 ↗
18. Role of finite-size effects in the microwave and subterahertz electromagnetic response of a multiwall carbon-nanotube-based composite: Theory and interpretation of experiments10.1103/PhysRevB.88.045436 ↗
19. Microwave absorption properties of CoS2 nanocrystals embedded into reduced graphene oxide10.1021/acsami.7b06982 ↗
20. Synthesis, characterization, and microwave absorption properties of reduced graphene oxide/strontium ferrite/polyaniline nanocomposites10.1186/s11671-016-1340-x ↗
21. How effectively do carbon nanotube inclusions contribute to the electromagnetic performance of a composite material? Estimation criteria from microwave and terahertz measurements10.1016/j.carbon.2017.12.067 ↗
22. Effect of pore morphology on the dielectric properties of porous carbons for microwave absorption applications10.1021/jp506999k ↗
23. Electromagnetic properties of model vitreous carbon foams10.1016/j.carbon.2017.06.080 ↗
24. Main principles of passive devices based on graphene and carbon films in microwave—THz frequency range10.1117/1.JNP.11.032504 ↗
25. Synthesis and microwave absorption property of flexible magnetic film based on graphene oxide/carbon nanotubes and Fe3O4 nanoparticles10.1039/C4TA02815E ↗
26. Microwave absorption enhancement and complex permittivity and permeability of Fe encapsulated within carbon nanotubes10.1002/adma.200306460 ↗
27. Microwave absorption properties of multiwalled carbon nanotube/FeNi nanopowders as light-weight microwave absorbers10.1016/j.jmmm.2013.05.010 ↗
28. Fabrication of carbon encapsulated Co3O4 nanoparticles embedded in porous graphitic carbon nanosheets for microwave absorber10.1016/j.carbon.2015.03.057 ↗
29. Fabrication and microwave absorption of carbon nanotubes/CoFe2O4 spinel nanocomposite10.1063/1.2165276 ↗
30. Fabrication of NiCo2-anchored graphene nanosheets by liquid-phase exfoliation for excellent microwave absorbers10.1021/acsami.6b16144 ↗
31. Interfacial interactions and synergistic effect of CoNi nanocrystals and nitrogen-doped graphene in a composite microwave absorber10.1016/j.carbon.2016.04.006 ↗
32. Microstructure and microwave absorption properties of carbon-coated iron nanocapsules10.1088/0022-3727/40/17/056 ↗
33. Catalytic pyrogenation synthesis of C/Ni composite nanoparticles: controllable carbon structures and high permittivities10.1088/0022-3727/43/10/105403 ↗
34. Rational design of core-shell Co@C microspheres for high-performance microwave absorption10.1016/j.carbon.2016.10.059 ↗
35. Microwave magnetic properties of Co50/(SiO2)50 nanoparticles10.1063/1.1484248 ↗
36. Microwave-absorption properties of ZnO-coated iron nanocapsules10.1063/1.2945639 ↗
37. Magnetic and microwave absorption properties of La-Nd-Fe alloys10.1016/j.jmmm.2016.08.093 ↗
38. Compatibility-tuned distribution of nanoparticles in co-continuous rubber structures toward microwave absorption enhancement10.1039/C6RA26155H ↗
39. Investigation on peak frequency of the microwave absorption for carbonyl iron/epoxy resin composite10.1016/j.jmmm.2010.12.028 ↗
40. Facile synthesis of a CNT@Fe@SiO2 ternary composite with enhanced microwave absorption performance10.1039/C5RA11162E ↗
41. Preparation and electromagnetic and microwave absorbing properties of Fe-filled carbon nanotubes10.1016/j.jallcom.2008.03.127 ↗
42. Synthesis and characterization of Fe3O4/polypyrrole/carbon nanotube composites with tunable microwave absorption properties: Role of carbon nanotube and polypyrrole content10.1016/j.cej.2015.10.031 ↗
43. Effect of absorbers' composition on the microwave absorbing performance of hollow Fe3O4 nanoparticles decorated CNTs/graphene/C composites10.1016/j.jallcom.2018.03.202 ↗
44. Controlled morphology of MWCNTs driven by polymer-grafted nanoparticles for enhanced microwave absorption10.1039/C7TC02892J ↗