Influence of Ni substitution for B on crystallization behavior, microstructure and magnetic properties of FeBCu alloys
Source abstract
Abstract
Abstract The crystallization, microstructure and magnetic properties of Fe83NixB16−xCu1 (x = 0, 1, 2, 4) alloys are investigated by Mossbauer spectroscopy, X-ray diffractometry and magnetometry. The substitution of Ni for B in the Fe83B16Cu1 alloy enriches Fe clusters in melt-spun ribbons and promotes the nucleation of α-Fe(Ni), which is beneficial to the formation of high volume fraction of nanocrystals after crystallization. Furthermore, the addition of 1–2 at.% Ni widens the annealing temperature range for the alloys with low HC. Excellent magnetic properties with high saturation magnetic flux density (BS) of 1.83 T and low coercivity (HC) of 9.2 A/m are obtained by annealing the Fe83Ni2B14Cu1 melt-spun ribbons. In addition, the nanocrystalline alloy with x = 2 possesses a lower saturation magnetostriction (19 ppm) than that of the Ni-free alloy (25 ppm).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallic Glasses and Amorphous Alloys · Magnetic Properties of Alloys · Magnetic properties of thin films
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Industrialization of nanocrystalline Fe-Si-B-P-Cu alloys for high magnetic flux density cores10.1016/j.jmmm.2015.10.091 ↗
2. Improvement of magnetic properties, microstructure and magnetic structure of Fe73.5Cu1Nb3Si15.5B7 nanocrystalline alloys by two-step annealing process
3. Magnetic properties of HITPERM (Fe, Co)88Zr7B4Cu1 magnets10.1063/1.369804 ↗
4. Magnetic properties of 120-mm wide ribbons of high BS and low core-loss NANOMET® alloy10.1063/1.4913936 ↗
5. New Fe-based soft magnetic alloys composed of ultrafine grain structure10.1063/1.342149 ↗
6. Modern soft magnets: amorphous and nanocrystalline materials10.1016/j.actamat.2012.10.040 ↗
7. Industrialization of a FeSiBNbCu nanocrystalline alloy with high BS of 1.39 T and outstanding soft magnetic properties
8. Soft magnetic properties of rapidly-annealed nanocrystalline Fe-Nb-B-(Cu) alloys10.1016/j.jallcom.2017.06.208 ↗
9. New high-BS Fe-based nanocrystalline soft magnetic alloys10.1143/JJAP.46.L477 ↗
10. Evolution of structural and magnetic properties of the FeCuBP amorphous alloy during annealing10.1016/j.jallcom.2017.06.147 ↗
11. Magnetic properties of nanocrystalline Fe82.65Cu1.35SixB16−x alloys (x = 0–7)10.1063/1.2769956 ↗
12. Effect of P to B concentration ratio on soft magnetic properties in FeSiBPCu nanocrystalline alloys10.1063/1.3672082 ↗
13. Crystallization behavior and magnetic properties in High Fe content FeBCSiCu alloy system10.1016/j.jmmm.2015.03.033 ↗
14. Synthesis of novel FeSiBPCCu alloys with high amorphous forming ability and good soft magnetic properties10.1016/j.jnoncrysol.2018.09.021 ↗
15. Effect of Co addition on the magnetic properties and microstructure of FeNbBCu nanocrystalline alloys10.1016/j.jmmm.2016.06.020 ↗
16. Effects of minor precipitation of large size crystals on magnetic properties of Fe-Co-Si-B-P-Cu alloy10.1016/j.jallcom.2017.03.193 ↗
17. Effect of Fe to P concentration ratio on structures, crystallization behavior, and magnetic properties in (Fe0.79+xP0.1-xC0.04B0.04Si0.03)99Cu1 alloys10.1063/1.4800837 ↗
18. Copper-free nanocrystalline soft magnetic materials with high saturation magnetization comparable to that of Si steel10.1063/1.4973772 ↗
19. The effect of Ni addition on microstructure and soft magnetic properties of FeCoZrBCu nanocrystalline alloys10.1063/1.4977229 ↗
20. Magnetic properties of ultrathin 3d transition-metal binary alloys. I. Spin and orbital moments, anisotropy, and confirmation of Slater-Pauling behavior
21. Surface crystallization and magnetic properties of Fe84.3Cu0.7Si4B8P3 soft magnetic ribbons10.1016/j.actamat.2015.05.051 ↗
22. Minor-Cu doped soft magnetic Fe-based FeCoBCSiCu amorphous alloys with high saturation magnetization
23. Improving the validity of hyperfine field distributions from magnetic alloys: part I: unpolarized source10.1016/0168-583X(87)90182-0 ↗
24. Atom probe analysis and magnetic properties of nanocrystalline Fe84.3Si4B8P3Cu0.710.1016/j.jallcom.2016.03.005 ↗
25. The influence of Nb atoms on the crystallization process of Fe-B-Nb amorphous alloys10.12693/APhysPolA.127.573 ↗
26. FeSiBPCu nanocrystalline soft magnetic alloys with high BS of 1.9 tesla produced by crystallizing hetero-amorphous phase10.2320/matertrans.MER2008306 ↗
27. Amorphous and nanocrystalline materials for application as soft magnets10.1016/S0079-6425(99)00002-X ↗
28. Classification of bulk metallic glasses by atomic size difference, heat of mixing and period of constituent elements and its application to characterization of the main alloying element10.2320/matertrans.46.2817 ↗
29. Interplay of crystallization, stress relaxation and magnetic properties for FeCuNbSiB soft magnetic composites10.1016/j.jallcom.2016.02.239 ↗
30. Cu addition effect on soft magnetic properties in Fe-Si-B alloy system10.1063/1.2829240 ↗
31. Two-phase random magnetic anisotropy model for nanostructured soft magnetic alloys10.7498/aps.45.2061 ↗
32. Influence of Ni on the structural and magnetic properties of NixFe73.5-xSi13.5B9Nb3Cu1 (0 ≤ x ≤ 25) alloys10.1063/1.1825633 ↗
33. Influence of Al and Ni on the magnetic properties of Finemet alloys10.1016/j.jmmm.2010.06.027 ↗
34. A new method of analyzing thermogravimetric data10.1246/bcsj.38.1881 ↗
35. Crystallization kinetics of (Ni0.75Fe0.25)78Si10B12 amorphous alloy10.1016/j.jnoncrysol.2007.10.009 ↗