Influence of mechanical and water-jet cutting on the dynamic magnetic properties of NO Fe-Si steels
Source abstract
Abstract
Abstract Magnetization curve and energy losses have been analyzed in non-oriented (NO) Fe-Si alloys with variable thickness (0.20 mm–0.35 mm), cut at widths ranging between 5 mm and 60 mm, in order to assess the impact of cutting, either done by punching or water-jet techniques. Measurements were performed by means of a digitally controlled single strip tester, from dc up to 1.5 kHz, at peak polarization values Jp = 1.0 T and 1.5 T. The evolution of the magnetization curve and the structure-dependent hysteresis Wh and excess Wexc loss components have been assessed as a function of the strip width using a simple phenomenological model, by which the extension of the damaged area at the edges of the cut sheets is estimated. Such a model assumes a hyperbolic dependence of the measured polarization on the cut strip width. The limiting values of Wh and Wexc for the fully damaged and the pristine sheets are in this way estimated, showing that one can simply and affordably predict the magnetic behavior of NO Fe-Si steels subjected to cutting.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnetic Properties and Applications · Microstructure and Mechanical Properties of Steels · Magnetic properties of thin films
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. International Energy Agency statistics, http://www.iea.org/stats, 2006.
2. The induction machine in Eastern Europe: A research agenda
3. Importance of punching and workability in non-oriented electrical steel sheets10.1016/j.jmmm.2008.04.073 ↗
4. Joint punching and frequency effects on practical magnetic characteristics of electrical steels for high-speed machines10.1016/j.jmmm.2016.10.150 ↗
5. Microstructure, texture and magnetic properties of strip-cast 1.3% Si non-oriented electrical steel10.1016/j.jmmm.2012.05.046 ↗
6. Effect of metallurgical factors on the bulk magnetic properties of non-oriented electrical steels10.1016/j.jmmm.2013.12.052 ↗
7. Effect of hot band grain size on development of textures and magnetic properties in 2.0% Si non-oriented electrical steel sheet10.1016/j.jmmm.2015.08.010 ↗
8. Texture and magnetic properties of non-oriented electrical steels processed by an unconventional cold rolling scheme10.1016/j.jmmm.2015.12.057 ↗
9. Processing optimization and characterization of magnetic non-oriented electrical silicon steel10.1016/S1452-3981(23)13950-2 ↗
10. Separating components of the hysteresis loss of non-oriented electrical steels10.4028/www.scientific.net/MSF.302-303.440 ↗
11. Magnetostriction in non-oriented electrical steels10.1016/j.physb.2006.06.014 ↗
12. Texture and magnetic property evolution of non-oriented Fe-Si steel due to mechanical cutting10.1016/j.jmmm.2015.10.023 ↗
13. Advanced soft- and hard-magnetic material models for the numerical simulation of electrical machines10.1109/TMAG.2018.2865096 ↗
14. Influence of shear cutting parameters on the electromagnetic properties of non-oriented electrical steel sheets10.1016/j.jmmm.2016.08.002 ↗
15. The influence of punching process on residual stress and magnetic domain structure of non-oriented silicon steel10.1016/j.jmmm.2015.12.098 ↗
16. Effects of punching process on crystal orientations, magnetic and mechanical properties in non-oriented silicon steel10.1016/j.jmmm.2017.07.003 ↗
17. Comparison between magnetic industrial frequency properties of non-oriented FeSi alloys, cut by mechanical and water jet technologies
18. Determination of original nondegraded and fully degraded magnetic characteristics of material subjected to laser cutting10.1109/TIA.2017.2696479 ↗
19. Modeling the influence of varying magnetic properties in soft magnetic materials on the hysteresis shape using the flux tube approach10.1063/1.4906956 ↗
20. Laser cutting and mechanical cutting of electrical steels and its effect on the magnetic properties10.1109/TMAG.2013.2285256 ↗
21. Neutron grating interferometry investigation of punching-related local magnetic property deteriorations in electrical steels10.1016/j.jmmm.2018.10.098 ↗
22. Degradation of static and dynamic magnetic properties of non-oriented steel sheets by cutting10.1109/TMAG.2018.2834375 ↗
23. Effect of punching and water-jet cutting methods on magnetization curve and energy losses of non-oriented magnetic steel sheets
24. Fiorillo · 2004
25. Bertotti · 1998
26. Loss decomposition in non-oriented steel sheets: the role of the classical losses10.1109/LMAG.2016.2604204 ↗
27. Predicting loss in magnetic steels under arbitrary induction waveform and with minor hysteresis loops10.1109/TMAG.2004.830510 ↗
28. Physical interpretation of eddy current losses in ferromagnetic materials. II. Analysis of experimental results10.1063/1.334405 ↗