journal article·2016-08

Effect of boron additions on phase formation and magnetic properties of TbCu7-type melt spun SmFe ribbons

Chuanjiang Zheng, Dunbo Yu, Kuoshe Li, Yang Luo, Jinling Jin, Shuo Lu, Hongwei Li, Yongjun Mao, Ningtao Quan

Publisher page

Abstract

Abstract Melt spun ribbons of a series of SmFe 12 B x ( x =0.0, 0.5, 0.75, 1.0, 1.25, and 1.5) have been prepared by the melt spinning technique. Sm–Fe–B melt spun ribbons with single phase TbCu 7 -type structure were prepared from the SmFe 12 B x ( x =0.5, 0.75, and 1.0) alloys at the surface velocity around 40 m/s. The addition of boron not only inhibits the appearance of soft magnetic phase α-Fe, but also enhances the ability of amorphous formation for melt spun Sm–Fe ribbons. The concentration of boron atoms, however, exceeds the limit of the solubility ( x >1.0) of Sm–Fe alloys, which does not impede the appearance of α-Fe but accelerates the formation of metastable phase Sm 2 Fe 23 B 3 that is unfavorable to their magnetic properties. Moreover, it is found that the addition of boron whose concentration is 0.0≤ x ≤0.75 can stabilize the metastable TbCu 7 -type structure because of the increase of the lattice parameter ratio c/a . The magnetic properties of as-annealed SmFe 12 B 1.0 melt spun ribbons with an energy product of 2.19MGOe, a coercivity of 2.36 kOe and a remanence of 4.8 kGs have been achieved. The microstructural characteristics of as-annealed melt spun SmFe 12 and SmFe 12 B 1.0 ribbons have been discussed as well. The following sequence of the hyperfine field H(6l) H(3g) H(2e) and the isomer shift δ(3g) δ(6l) δ(2e) is obtained by the analysis of 57 Fe Mossbauer spectra. As the boron content is added gradually, the hyperfine fields of 3g and 6l sites increase slightly due to the competition of the positive electron polarization and the negative polarization. However, the value of H(2e) is almost constant.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnetic Properties of Alloys · Magnetic Properties and Applications · Magnetic properties of thin films

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. Structural and hard magnetic properties of rapidly solidified Sm-Fe–N10.1063/1.349302 ↗
2. Interstitial intermetallics10.1016/0304-8853(95)00603-6 ↗
3. Effects of N, C and B additions on the Sm2Fe17 crystal structure and magnetic properties10.1016/0925-8388(94)04934-3 ↗
4. Classification of bulk metallic glasses by atomic size difference, heat of mixing and period of constituent elements and its application to characterization of the main alloying element10.2320/matertrans.46.2817 ↗
5. Investigation of the structural properties of crystallized Fe–(Cu)–Sm–B ribbons
6. Crystallization processes and resulting phase structure of Sm–Fe–B melt-spun ribbons10.1016/S0304-8853(01)01268-9 ↗
7. Magnetism and phase structure of crystallized Sm–Fe–B melt spun ribbons
8. investigation of amorphous Sm–Fe–B ribbons under applied field10.1016/S0925-8388(02)01088-5 ↗
9. Magnetic properties of Sm–Fe–B compounds10.1016/j.jallcom.2004.10.008 ↗
10. Phase and microstructure of TbCu7-type SmFe melt-spun powders10.1016/S1002-0721(12)60290-7 ↗
11. Magnetic properties of rapidly quenched (Sm, Zr)(Fe, Co)7N+α-Fe10.2320/matertrans1989.37.1232 ↗
12. Magnetic properties and microstructure of rapidly quenched SmZrFeCoN magnets10.1109/20.800501 ↗
13. Formation of metastable crystalline phases in amorphous Fe74R6B20 alloys (R=Ce, Nd, Sm, Gd, Tb, Dy, Er)10.1016/0022-3093(91)90509-5 ↗
14. Y. Ikeda, M. Takano, Y. Bando, Formation Mechanism of Needle-like α-Fe2O3 Particles Grown Along the c Axis and Characterization of Precursorily Formed β-Fe2O3 (Commemoration Issue Dedicated to Professor Toshio TAKADA On the Occasion of His Retirement), 1986.
15. Structure relations and XRD patterns of the disorder-order transition of metastable RE2TM17 alloys10.4028/www.scientific.net/MSF.443-444.271 ↗
16. Structure and magnetic behaviors of melt-spun SmFeSiB ribbons and their nitrides10.1016/j.jmmm.2015.12.080 ↗
17. Coercivity of Sm–Fe–N ferromagnets produced by the mechanical alloying technique10.1063/1.355079 ↗
18. Abnormal size-dependent coercivity in ternary Sm–Fe–N nanoparticles10.1016/j.jallcom.2015.01.290 ↗
19. On the estimation of average crystallite size of zeolites from the Scherrer equation: a critical evaluation of its application to zeolites with one-dimensional pore systems10.1016/j.micromeso.2008.06.010 ↗
20. Remanence and coercivity in isotropic nanocrystalline permanent magnets10.1103/PhysRevB.49.6100 ↗
21. Physical properties of metastable nanocrystalline Sm–Fe–Si Alloys10.1080/15421400490478777 ↗
22. Formation of modified TbCu7 and Th2Zn17 type structures during annealing of mechanical-alloyed Sm–Fe powders10.1016/S0925-8388(98)00571-4 ↗
23. Correlation between Sm2(Fe,Ga)17 and its precursor Sm(Fe,Ga)910.1063/1.1825626 ↗
24. Hard magnetic Sm(Fe,Si)9 carbides: Structured and magnetic properties10.1103/PhysRevB.69.064402 ↗