Modeling and optimization of effective parameters on the size of synthesized Fe3O4 superparamagnetic nanoparticles by coprecipitation technique using response surface methodology
Source abstract
Abstract
Abstract Generally, the statistical methods are defined as appropriate techniques to study the processes trends. In current research, the Fe 3 O 4 superparamagnetic nanoparticles were synthesized by coprecipitation method. In order to investigate the size properties of synthesized particles, the experimental design was done using central composite method (CCD) of response surface methodology (RSM) while the temperature, pH, and cation ratio of reaction were selected as influential factors. After particles synthesis based on designed runs, the different responses such as hydrodynamic size of particles (both freeze dried and air dried), size distribution, crystallite size, magnetic size, and zeta potential were evaluated by different techniques i.e. dynamic light scattering (DLS), X-ray diffraction (XRD), and vibrating sample magnetometer (VSM). Based on these results, the quadratic polynomial model was fitted for each response that could predict the response amounts. In following, the study of factors effects was carried out that showed the temperature, pH, and their interactions had higher effectiveness. Finally, by optimizing, it was clear that the minimum amounts of particle size (10.15 nm) and size distribution (13.01 nm) were reached in the minimum temperature (70 °C) and cation ratio (0.5) amounts and maximum pH amount (10.5). Moreover, the characterizations showed the particles size was about 10 nm while the amounts of M s , H c , and M r were equal to 60 (emu/g), 0.2 (Oe) and 0.22 (emu/g), respectively.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnetic Properties and Synthesis of Ferrites · Iron oxide chemistry and applications · Coagulation and Flocculation Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (55)
Show source-provided references
1. Xu · Chem. Eng. Sci. · 2006 · 61 · 102710.1016/j.ces.2005.06.019 ↗
2. Lubbe · J. Magn. Magn. Mater. · 1999 · 194 · 14910.1016/S0304-8853(98)00574-5 ↗
3. Ai · Adv. Mater. · 2005 · 17 · 194910.1002/adma.200401904 ↗
4. Lee · IEEE Trans. Magn. · 2005 · 41 · 410210.1109/TMAG.2005.855338 ↗
5. Jurgons · J. Phys.: Condens. Matter · 2006 · 18 · S2893
6. Qiang · J. Nanopart. Res. · 2006 · 8 · 48910.1007/s11051-005-9011-3 ↗
7. Cornell · 2003
8. Murad · 1985
9. Meisen · J. Imaging Sci. Technol. · 2000 · 44 · 50810.2352/J.ImagingSci.Technol.2000.44.6.art00007 ↗
10. Structural, microstructural and thermal properties of lead-free bismuth–sodium–barium–titanate piezoceramics synthesized by mechanical alloying10.1016/j.materresbull.2012.11.008 ↗
11. Effect of intermediate phases on the formation of nanostructured lead-free (Bi0.5 Na0.5)0.94 Ba0.06 TiO3 piezoceramics by mechanical alloying10.1016/j.jallcom.2013.10.192 ↗
12. Dielectric properties of CaCu3Ti4O12 improved by chromium/lanthanum co-doping10.1016/j.ceramint.2012.02.005 ↗
13. Structural and phase evolution in mechanically alloyed calcium copper titanate dielectrics10.1016/j.ceramint.2012.10.019 ↗
14. Compression testing of continuous fiber reinforced polymer composites with out-of-plane fiber waviness and circular notches10.1016/j.polymertesting.2014.02.004 ↗
15. Effects of scratch damage on progressive failure of laminated carbon fiber/epoxy composites10.1016/j.ijmecsci.2012.12.008 ↗
16. Overlay patch repair of scratch damage in carbon fiber/epoxy laminated composites10.1016/j.compositesa.2013.03.005 ↗
17. Teja · 2002 · 327
18. Synthesis, properties, and applications of magnetic iron oxide nanoparticles10.1016/j.pcrysgrow.2008.08.003 ↗
19. The effects of particle size and surface coating on the cytotoxicity of nickel ferrite10.1016/j.biomaterials.2005.02.036 ↗
20. Mixed iron-manganese oxide nanoparticles10.1021/jp049913w ↗
21. Iron oxide-based superparamagnetic polymeric nanomaterials: design, preparation, and biomedical application10.1016/j.progpolymsci.2010.08.005 ↗
22. An overview of the structure and magnetism of spinel ferrite nanoparticles and their synthesis in microemulsions10.1016/j.cej.2006.11.001 ↗
23. An overview of the structure and magnetism of spinel ferrite nanoparticles and their synthesis in microemulsions10.1016/j.cej.2006.11.001 ↗
24. Rosensweig · 2001
25. Nanoparticles in biomedicine
26. Cullity · 2009
27. Kim · J. Magn. Magn. Mater. · 2001 · 225 · 3010.1016/S0304-8853(00)01224-5 ↗
28. Tavakoli · Chem. Pap. · 2007 · 61 · 15110.2478/s11696-007-0014-7 ↗
29. Hao · J. Mater. Res. · 2003 · 18 · 41510.1557/JMR.2003.0053 ↗
30. Lam · Ind. Eng. Chem. Res. · 2008 · 47 · 59910.1021/ie070494+ ↗
31. Synthesis, functionalization, and biomedical applications of multifunctional magnetic nanoparticles10.1002/adma.201000260 ↗
32. The design and utility of polymer-stabilized iron-oxide nanoparticles for nanomedicine applications10.1038/asiamat.2010.6 ↗
33. E. Auzāns, R. Massart , Mn–Zn Ferrite Nanoparticles for Water-and Hydrocarbone-based Ferrofluids: Preparation and Properties, 1999.
34. Synthesis and properties of Mn–Zn ferrite ferrofluids10.1023/A:1004525410324 ↗
35. Avrami behavior of magnetite nanoparticles formation in co-precipitation process10.2298/JMMB110330010A ↗
36. Preperation and properties of monodisperse magnetic fluid10.1016/0304-8853(95)00316-9 ↗
37. Photocatalytic degradation using design of experiments: a review and example of the Congo red degradation10.1016/j.jhazmat.2009.10.050 ↗
38. Optimization and modeling of the photocatalytic degradation of the Insect repellent DEET in aqueous TiO2 suspensions10.1002/clen.201200405 ↗
39. Application of response surface methodology in the optimization of photocatalytic removal of environmental pollutants using nanocatalysts10.1080/09593330.2011.597432 ↗
40. Application of the central composite design and response surface methodology to the advanced treatment of olive oil processing wastewater using Fenton’s peroxidation10.1016/j.jhazmat.2005.03.042 ↗
41. Optimization of coagulation–flocculation process for a paper-recycling wastewater treatment using response surface methodology10.1016/j.colsurfa.2007.02.023 ↗
42. Optimization and evaluation of acetylcholine esterase immobilization on ceramic packing using response surface methodology10.1016/j.procbio.2009.08.007 ↗
43. Response surface methodology (RSM) as a tool for optimization in analytical chemistry10.1016/j.talanta.2008.05.019 ↗
44. Improvement of xylanase production by Penicillium oxalicum ZH-30 using response surface methodology10.1016/j.enzmictec.2006.10.015 ↗
45. Synthesis of silver nanocatalyst by gel-casting using response surface methodology10.1016/j.powtec.2012.05.012 ↗
46. Application of response surface methodology for optimization of peroxi-coagulation of textile dye solution using carbon nanotube–PTFE cathode10.1016/j.jhazmat.2009.08.120 ↗
47. Optimization and modeling of preparation conditions of TiO2 nanoparticles coated on hollow glass microspheres using response surface methodology10.1016/j.seppur.2014.01.042 ↗
48. LS1-A computer program for simultaneous refinement of material structure and microstructure10.1107/S0021889892001122 ↗
49. Profile shape functions in rietveld refinements10.1107/S002188988201231X ↗
50. Size determination of superparamagnetic nanoparticles from magnetization curve10.1063/1.3117512 ↗
51. Spaldin · 2003
52. D. Gopman, E. Belogay, K. Sorge, Nanoparticles in the Mirror are Smaller than they Appear Sixth Annual Harriet L. Wilkes Honors College Symposium for Research and Creative Projects Featuring the Chastain Honors Symposium Lecture Series, 2008.
53. Orthogonal optimization design for preparation of Fe3O4 nanoparticles via chemical coprecipitation10.1016/j.apsusc.2013.05.041 ↗
54. Fabrication and estimation of Au-coated Fe3O4 nanocomposite powders for the separation and purification of biomolecules10.1016/j.msea.2006.02.438 ↗
55. Fe3O4 magnetic nanoparticles synthesis from tailings by ultrasonic chemical co-precipitation10.1016/j.matlet.2011.03.065 ↗