An investigation of magneto-optical Kerr effect signal by optical cavity in [Glass/Co/ZnS] structure
Source abstract
Abstract
Abstract In this paper, using the magneto optical Kerr effect, the magnetic properties of [Glass/Co/ZnS] structure has been investigated. Initially, by co-precipitation method, zinc sulfide was prepared and then by X-ray diffraction pattern, its structure was confirmed. In the structure of [Glass/Co/ZnS], cobalt was used as a magnetic material and zinc sulfide acts as a capping layer. Before fabrication process, the optimums cobalt and zinc sulfide thicknesses were calculated using the MATLAB simulation software and the desired thicknesses were selected. To obtain layers with variable thicknesses, the oblique thermal evaporation technique was used and different thicknesses of about 5–90 nm for cobalt and 45 nm for zinc sulfide on the glass substrate were coated. The longitudinal Kerr signal (LKS) of the [Glass/Co/ZnS] samples were measured in different cobalt thicknesses. By using the magneto-optical Kerr effect (MOKE), the hysteresis loop of samples in the longitudinal geometry have been measured samples and it was observed that the sample has an easy axis in the plane of the film and in the direction of its large diameter. The results have shown that the capping layer with suitable thickness, by creation of an optical cavity, has been able to amplify the Kerr signal by more than 1.5 times, which is noticeable by considering the simplicity of the technique. This structure can be applied as a highly accurate magneto-optical sensor.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magneto-Optical Properties and Applications · Photonic Crystals and Applications · Photonic and Optical Devices
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. Interactions in magnetic arrays for storage and computation10.1016/S0167-9317(01)00561-5 ↗
2. Optical and magneto-optical study of nickel and cobalt ferrite epitaxial thin films and submicron structures10.1063/1.4792749 ↗
3. Magneto-optical Kerr effect studies of Cu2O/nickel heterostructures10.1016/j.mee.2012.10.023 ↗
4. Magnetostrictive type inductive sensing pressure sensor10.1016/j.sna.2015.11.023 ↗
5. Magnetic field sensing using evanescent waves in the Kretschmann configuration10.1016/j.sna.2014.09.025 ↗
6. Au/NiFe magnetoplasmonics: Large enhancement of magneto-optical kerr effect for magnetic field sensors and memories10.1007/s13391-015-4374-9 ↗
7. Cavity enhancement of the magneto-optical Kerr effect of a magnetic cobalt nanowires array10.1142/S0217984915502589 ↗
8. Structure, magnetic and magneto-optical properties of La-Ca-Co substituted strontium ferrites10.1080/10667857.2015.1125619 ↗
9. Surface plasmon resonance enhancement of the magneto-optical Kerr effect in Cu/Co/Ag/SnO2 structure10.1051/epjap/2014140141 ↗
10. Cavity enhancement of the magneto-optic Kerr effect in glass/Al/SnO2/PtMnSb/SnO2 structure10.1016/j.optcom.2010.07.039 ↗
11. Enhancement of Kerr signal in Co thin films incorporating Ag nanoparticles surrounded by TiO2
12. Enhancement of magneto-optical Kerr effect by surface plasmons in trilayer structure consisting of double-layer dielectrics and ferromagnetic metal10.1364/OE.23.011537 ↗
13. Enhancement of magneto-optical Kerr response by LSPR in magneto plasmonic nanostructures for biological sensors10.1016/j.jmmm.2017.08.033 ↗
14. Voltage-driven magneto-optical Kerr effect in a glass/Au/NiFe/dielectric/WS2 magneto-plasmonic structure10.1364/JOSAB.34.002436 ↗
15. Au/NiFe/M (Au, MoS2, graphene) trilayer magnetoplasmonics DNA-hybridized sensors with high record of sensitivity10.1117/1.JBO.22.12.127001 ↗
16. Magnetic hysteresis of epitaxially-deposited iron in the monolayer range: a Kerr effect experiment in surface magnetism10.1016/0304-8853(86)90172-1 ↗
17. ZnS quantum dot based nanocomposite scintillators for thermal neutron detection10.1016/j.nima.2010.07.032 ↗
18. Magneto-optical response of Cu/NiFe/Cu nanostructure under surface plasmon resonance10.1016/j.jmmm.2016.07.012 ↗
19. Optimization of magneto-optical Kerr effect in Cu/Fe/Cu nano-structure10.1007/s10948-016-3432-3 ↗
20. Universal approach to magneto-optics10.1016/0304-8853(90)90713-Z ↗
21. Palik · 1998
22. Surface magneto-optic Kerr effect10.1063/1.1150496 ↗
23. Investigation of electric field distribution in one dimensional photonic crystal waveguides10.1163/156939308786348929 ↗
24. The Kerr effect enhancement in non-quarter-wave lossy magnetophotonic crystals10.1016/j.physb.2010.08.020 ↗
25. Magnetic modulation of surface plasmon modes in magneto-plasmonic metal-insulator-metal cavities10.1364/OE.21.004917 ↗
26. Surface plasmon-induced enhancement of the magneto-optical Kerr effect in magneto plasmonic heterostructures10.1364/JOSAB.28.002115 ↗
27. Field-dependent magneto-optical Kerr effect spectroscopy applied to the magnetic component diagnosis of a rubrene/Ni system10.1364/OE.22.018454 ↗
28. Intertwined magneto-optical and plasmonic effects in Ag/Co/Ag layered structures10.1103/PhysRevB.80.125132 ↗
29. Tuning the effective parameters in (Ta/Cu/[Ni/Co]x/Ta) multilayers with perpendicular magnetic anisotropy10.1016/j.physc.2018.02.053 ↗