Soft ferromagnetic amorphous microwires for GMI sensing cores
Source abstract
Abstract
Abstract The recent work is focused on the development of suitable amorphous ferromagnetic microwires (CoFe-based) for use in giant magneto-impedance (GMI) magnetic sensing cores. Rapid solidification route is used for the preparation of microwires via in-rotating water quenching technique. The potential of the CoFeSiBCr soft magnetic microwires for GMI based sensing core is investigated by using the driving frequency of MHz range. The GMI characteristics of the developed materials are carried out via impedance-mode. The performance of the magnetic sensor is studied based on its maximum GMI ratio, magnetic field sensitivity and noise spectrum. The experimental results reveal that the maximum GMI ratio, GMImax of about 650% and field sensitivity of around 802 V/T is achieved at ac driving frequency of 5 MHz with 3 mA driving current when annealed at 750 K for 5 min. The noise level of the optimized microwire can be obtained under 10 nT/√Hz@1 Hz while driven at 5 MHz. By means of its high operating frequency regime, high sensitivity, low noise level and simple methodology for sensing, the GMI microwires working in impedance-mode can be a potential candidate for commercial sensing applications such as microfluxgate sensors.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallic Glasses and Amorphous Alloys · Magnetic properties of thin films · Magneto-Optical Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (17)
Show source-provided references
1. Vazquez · Int. J. Appl. Electromagnet Mech · 2007 · 25 · 44110.3233/JAE-2007-744 ↗
2. Chizhik · J. Magn. Magn. Mater. · 2017 · 422 · 29910.1016/j.jmmm.2016.09.011 ↗
3. Development of a GMI sensor for evaluating microstructural degradation in ferromagnetic materials
4. R.W. Cahn, in Rapidly Solidified Alloys: Processes, Structures, Properties, Applications, H.H. Liebermann, (Ed.), Marcel Dekker Inc, New York, Ch. 1, (1993), pp. 1.
5. P.H. Shingu, K.N. Ishihara, in Rapidly Solidified Alloys: Processes, Structures, Properties, Applications, H.H. Liebermann, (Ed.), Marcel Dekker Inc., New York, Chap.4, (1993), pp. 103.
6. T. Masumoto, A. Inoue, M. Hagiwara, US Patent No. 4523626, (1985).
7. R.B. Schwartz, in Rapidly Solidified Alloys: Processes, Structures, Properties, Applications, H.H. Liebermann, (Ed.), Marcel Dekker Inc., New York, Chap. 7, (1993), pp. 157.
8. Konovalov · Sol. · 1996 · 205–207 · 536
9. Structural and giant magneto-impedance properties of Cr-incorporated Co–Fe–Si–B amorphous microwires10.1016/j.jmmm.2011.11.052 ↗
10. Interplay of stress, temperature, and giant magnetoimpedance in amorphous soft magnets10.1063/1.4903250 ↗
11. Amorphous and nanocrystalline materials for applications as soft magnets10.1016/S0079-6425(99)00002-X ↗
12. Alloy substituents for cost reduction in soft magnetic materials10.1557/jmr.2015.56 ↗
13. Optimization of process parameters for developing FeCoSiB amorphous microwires through in-rotating-water quenching technique10.1007/s00339-012-7260-4 ↗
14. Phan · Prog. Mater Sci. · 2008 · 53 · 32310.1016/j.pmatsci.2007.05.003 ↗
15. Development of a high sensitivity giant magneto-impedance magnetometer: comparison with a commercial flux-gate10.1109/TMAG.2012.2219579 ↗
16. A novel CMOS transducer for giant magnetoresistance sensors10.1063/1.4976025 ↗
17. P. Sarkar, A.K. Panda, S.K. Pal, R.K. Roy, A. Mitra, “A giant magneto-impedance (GMI) based magnetic sensing device for nondestructive evaluation applications,” Indian Patent 0651DEL2011.