journal article·2024-09

Effects of rotational speed of the classifying wheel during jet milling on magnetic properties and thermal stability of sintered Nd-Fe-B magnets

Mengran Kong, Xiao Tian, Yu Wang, Feng Xia, Caina Sun

Publisher page

Abstract

Sintered Nd-Fe-B magnets with different grain sizes are prepared by adjusting rotational speed of the classifying wheel during the jet milling process. The microstructures of the magnets, the element contents of the magnets, the relationship between powder particle size and grain size and the magnetic properties of the magnets are studied by X-ray diffracton (XRD), scanning electron microscopy (SEM), optical microscopy (OM), electron backscattered diffraction (EBSD), inductively coupled plasma (ICP) and permanent magnet tester. The effect of grain size on thermal stability is characterized by the temperature coefficient of coercivity from room temperature to working temperature and the irreversible magnetic flux loss of the magnet at high temperature. The results show that the particle size of the alloy powder decreases with the increase of the rotational speed of the classifying wheel. When the alloy powder is formed and sintered, it is found that the grain size of the prepared magnet decreases with the decrease of the particle size of the alloy powder. The finer the grain size of the magnet, the clearer the grain boundary. As the grain size of the magnet decreases, the coercivity of the magnet increases, the remanence of the magnet decreases slowly and the thermal stability of the magnet becomes better. For the magnet with a rotational speed of the classifying wheel of 4900 r/min, the average grain size of the magnet is 4.70 μm, the coercivity ( H cj) is 15.47 kOe, and the remanence ( B r) is14.09 kGs. At a temperature of 80 °C, the coercivity temperature coefficient of the magnet reaches −0.745 %/°C, and the irreversible loss of magnetic flux hirr is 16.49 %. In addition, the magnet prepared by the tail material produced a large number of voids and pores due to the high oxygen content. Tail material is not good enough in terms of magnetic property as well as thermal stability.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnetic Properties of Alloys · Magnetic Properties and Applications · Magnetic properties of thin films

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Short-process recycling of Nd-Fe-B sintered magnet sludge wastes: challenges and approaches10.1016/j.jre.2023.04.019 ↗
2. Effect of annealing temperature on magnetic properties of a sintered Nd-Fe-B magnet after grain boundary diffusion with Dy70Cu30 alloy10.1016/j.jre.2022.11.015 ↗
3. Microstructure and improved properties of sintered Nd-Fe-B magnets by grain boundary diffusion of non-rare earth10.1016/j.jmmm.2018.12.048 ↗
4. Temperature stability and flux losses over time in sintered Nd-Fe-B permanent magnets10.1109/TMAG.2009.2023907 ↗
5. Effect of Dy2O3 intergranular addition on microstructure and magnetic properties of (Nd, Dy)-Fe-B sintered magnets10.1166/mex.2016.1275 ↗
6. Boundary structure modification and coercivity enhancement of the Nd-Fe-B magnets with TbCu doping by the process of pre-sintering and hot-pressing10.1016/j.jmmm.2018.09.033 ↗
7. Effects of diffusing DyZn film on magnetic properties and thermal stability of sintered NdFeB magnets10.1016/j.jmmm.2018.01.070 ↗
8. Grain boundary structure and chemistry of Dy-diffusion processed Nd-Fe–B sintered magnets10.1063/1.3351247 ↗
9. Nd-Fe-B permanent magnet materials10.1143/JJAP.26.785 ↗
10. R2Fe14B material: Intrinsic properties and technological aspects10.1103/RevModPhys.63.819 ↗
11. Nanocrystalline alternative rare earth-iron-boron permanent magnets without Nd, Pr, Tb and Dy: a review10.1016/j.jmrt.2023.12.147 ↗
12. M. Sagawa, Y. Une, Modern Permanent Magnets. England: Woodhead Publishing, 2022. Chapter 5, The status of sintered NdFeB magnets, p.135-168.10.1016/B978-0-323-88658-1.00010-8 ↗
13. Microstructural analysis of NdFeB ternary alloy for magnets fabricated using a strip-casting method10.2320/matertrans.MG201624 ↗
14. Microstructure and properties of Nd-Fe-B alloys produced by strip casting and of permanent magnets fabricated from them10.1007/s11041-015-9803-8 ↗
15. Effect of hydrogen pressure on hydrogen absorption of waste Nd-Fe-B sintered magnets10.1016/j.jmmm.2018.10.071 ↗
16. Enhancement of the magnetic property of Nd-Fe-B sintered magnets through novel powder rounding modification10.1016/j.jmmm.2024.172075 ↗
17. Simulation-aided development of magnetic-aligned compaction process with pulsed magnetic field10.1016/j.powtec.2018.01.035 ↗
18. Pressless process in route of obtaining sintered Nd-Fe-B magnets10.1016/j.jmmm.2014.10.140 ↗
19. High coercive Nd-Fe-B magnets fabricated via Two-Step sintering10.1016/j.jmmm.2011.06.034 ↗
20. Nd-Fe-B permanent magnets fabricated by low temperature sintering process10.1016/j.jallcom.2012.10.058 ↗
21. Coercivity enhancement of Dy-Free sintered Nd-Fe-B magnets by grain refinement and induction heat treatment10.1109/TMAG.2015.2435364 ↗
22. Normal and abnormal grain growth in fine-grained Nd-Fe-B sintered magnets prepared from He jet milled powders10.1016/j.jmmm.2016.10.139 ↗
23. Han · 1983 · P174
24. Li · 1965
25. Effect of misalignments of individual grains’ easy axis on magnetization-reversal process in granular NdFeB magnets: a finite-element micromagnetic simulation study10.1016/j.jmmm.2019.165257 ↗
26. Effect of cyclic sintering process for NdFeB magnet on microstructure and magnetic properties10.1016/j.jallcom.2012.06.118 ↗
27. Coercivity enhancement of rapidly solidified Nd-Fe-B magnet powders10.1016/j.scriptamat.2012.10.005 ↗
28. Grain-size dependent demagnetizing factors in permanent magnets10.1063/1.4904854 ↗
29. Micromagnetic simulations on the grain size dependence of coercivity in anisotropic Nd-Fe-B sintered magnets10.1016/j.scriptamat.2014.06.020 ↗
30. Micromagnetic simulations of magnetization reversals in Nd-Fe-B based permanent magnets10.2320/matertrans.M2015457 ↗
31. Dependence of the crystal structure of the Nd-rich phase on oxygen content in an Nd-Fe-B sintered magnet10.1016/j.scriptamat.2008.03.004 ↗
32. Coercivity of sintered NdFeB magnet
33. Design and fabrication of sintered Nd-Fe-B magnet with low temperature coefficient of intrinsic coercivity10.2298/SOS0901091C ↗
34. Analysis of the magnetic hardening mechanism in RE-Fe-B permanent magnets10.1016/0304-8853(88)90202-8 ↗
35. Y. Wang, P.B. Dong, B.C. Zhang, Stability and estimate for flux irreversible loss of Nd-Fe-B magnets. Metallic Functional Materials. 2006; 13: 5–9. [Beijing, Chinese].