journal article·2011-03

Heat generation ability in AC magnetic field of nano MgFe2O4-based ferrite powder prepared by bead milling

Hideyuki Hirazawa, Hiromichi Aono, Takashi Naohara, Tsunehiro Maehara, Mitsunori Sato, Yuji Watanabe

Publisher page

Abstract

Abstract Nanosized MgFe2O4-based ferrite powder having heat generation ability in an AC magnetic field was prepared by bead milling and studied for thermal coagulation therapy applications. The crystal size and the particle size significantly decreased by bead milling. The heat generation ability in an AC magnetic field improved with the milling time, i.e. a decrease in crystal size. However, the heat generation ability decreased for excessively milled samples with crystal sizes of less than 5.5 nm. The highest heat ability (ΔT=34 °C) in the AC magnetic field (370 kHz, 1.77 kA/m) was obtained for fine MgFe2O4 powder having a ca. 6 nm crystal size (the samples were milled for 6–8 h using 0.1 mm ϕ beads). The heat generation of the samples was closely related to hysteresis loss, a B–H magnetic property. The reason for the high heat generation properties of the samples milled for 6–8 h using 0.1 mm ϕ beads was ascribed to the increase in hysteresis loss by the formation of a single domain. Moreover, the improvement in heating ability was obtained by calcination of the bead-milled sample at low temperature. In this case, the maximum heat generation (ΔT=41 °C) ability was obtained for a ca. 11 nm crystal size sample was prepared by crystal growth during the sample calcination. On the other hand, the ΔT value for Mg0.5Ca0.5Fe2O4 was synthesized using a reverse precipitation method decreased by bead milling.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnetic Properties and Synthesis of Ferrites · Metallic Glasses and Amorphous Alloys · Iron oxide chemistry and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (16)

Show source-provided references
1. Storm · Int. J. Radiat. Oncol. Biol. Phys. · 1982 · 8 · 86510.1016/0360-3016(82)90090-6 ↗
2. Baker · Am. J. Surg. · 1982 · 143 · 58610.1016/0002-9610(82)90169-6 ↗
3. Leveen · J. Am. Med. Assoc. · 1976 · 235 · 219810.1001/jama.1976.03260460018014 ↗
4. Marchal · Int. J. Hyperthermia · 1985 · 2 · 10510.3109/02656738509029278 ↗
5. Hirazawa · Jpn. J. Appl. Phys. · 2006 · 45 · 867310.1143/JJAP.45.8673 ↗
6. Ito · J. Biosci. Bioeng. · 2005 · 100 · 110.1263/jbb.100.1 ↗
7. Shinkai · J. Magn. Magn. Mater. · 1999 · 194 · 17610.1016/S0304-8853(98)00586-1 ↗
8. Jordan · J. Magn. Magn. Mater. · 1999 · 194 · 18510.1016/S0304-8853(98)00558-7 ↗
9. Shinkai · J. Biosci. Bioeng.. · 2002 · 94 · 60610.1016/S1389-1723(02)80202-X ↗
10. Ma · J. Magn. Magn. Mater. · 2004 · 268 · 3310.1016/S0304-8853(03)00426-8 ↗
11. Aono · Mater. Res. Bull. · 2005 · 40 · 112610.1016/j.materresbull.2005.03.014 ↗
12. Maehara · Jpn. J. Appl. Phys. · 2002 · 41 · 162010.1143/JJAP.41.1620 ↗
13. Maehara · J. Mater. Sci. · 2005 · 40 · 13510.1007/s10853-005-5698-x ↗
14. Aono · Appl. Surf. Sci. · 2008 · 254 · 231910.1016/j.apsusc.2007.09.024 ↗
15. Aono · Chem. Lett. · 2005 · 34 · 48210.1246/cl.2005.482 ↗
16. Hirazawa · J. Alloys Compd. · 2008 · 461 · 46710.1016/j.jallcom.2007.07.024 ↗