journal article·2014-08

Effects of sintering on structural and magnetic properties of Cu substituted cobalt–nickel mixed ferrite nano particles

J. Balavijayalakshmi, N. Suriyanarayanan, R. Jayaprakash

Publisher page

Abstract

Abstract Copper substituted cobalt–nickel mixed ferrite nano particles are synthesized by co-precipitation method and the samples are sintered at 130 °C, 600 °C and 900 °C. The effects of sintering on structural and magnetic properties are studied using XRD analysis and VSM studies. The particle sizes are found to be 12 nm and 32 nm for the samples sintered at 600° and 900 °C respectively and the degree of crystallinity of the sample increases with increasing sintering temperature. The absorption bands shift to lower values on sintering the samples. The saturation magnetization ( M s ), remanent magnetization ( M r ) and coercivity ( H c ) increase on sintering the samples at 600 °C and 900 °C. EDX results confirm the presence of Co, Ni, Cu, Fe and O without any impurities.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnetic Properties and Synthesis of Ferrites · Electromagnetic wave absorption materials · Magnetic properties of thin films

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (16)

Show source-provided references
1. Surface spin disorder in NiFe2O4 nanoparticles10.1103/PhysRevLett.77.394 ↗
2. Effect of interstitial oxygen on the crystal structure and magnetic properties of Ni nanoparticles10.1063/1.1792809 ↗
3. Photoinduced magnetization reversal in yttrium-iron garnets doped with silicon and cobalt10.1016/j.jallcom.2003.09.096 ↗
4. Tartaj · J. Phys. D: Appl. Phys. · 2003 · 36 · R-18210.1088/0022-3727/36/13/202 ↗
5. Colloquium: opportunities in nanomagnetism10.1103/RevModPhys.78.1 ↗
6. Patterned magnetic recording media10.1146/annurev.matsci.31.1.203 ↗
7. Recording technologies for tetrabit per square inch systems10.1109/TMAG.2002.1017761 ↗
8. Electrical resistivity of CuxZn1-xFe2O4 system
9. structural and magnetic properties of sol–gel Co2xNi0.5−xZn0.5−xFe2O4 thin films10.1016/j.jmmm.2010.10.031 ↗
10. Sintering temperature dependence of room temperature magnetic and dielectric properties of Co0.5Zn0.5Fe2O4 prepared using mechanically alloyed nanoparticles10.1016/j.jmmm.2009.10.041 ↗
11. The role of annealing temperature and bio template (egg white) on the structural, morphological and magnetic properties of manganese substituted MFe2O4(M=Zn, Cu, Ni, Co) nanoparticles10.1016/j.jmmm.2013.09.055 ↗
12. Samaila Bawa Waje, Mansor Hashim, Ismayadi Ismail, Effects of sintering temperature on grain growth and the complex permeability of Co0.2Ni0.3Zn0.5Fe2O4 material prepared using mechanically alloyed nanoparticles, J. Magn. Magn. Mater.
13. Chikazumi · 1997 · 202
14. Magnetic behaviour of nanocrystalline nickel ferrite: Part I. The effect of surface roughness10.1016/j.mseb.2005.03.016 ↗
15. Magnetic characterization of nanocrystalline NiZn ferrite powder prepared by the glyoxylate precursor method10.1088/0022-3727/35/23/301 ↗
16. Synthesis, characterization and magnetic properties of nanocrystalline Ni–Zn–Co ferrites10.1016/j.matlet.2009.10.014 ↗