journal article·2020-03

Structural and magnetic engineering of (Nd, Pr, Dy, Tb)–Fe–B sintered magnets with Tb3Co0.6Cu0.4H composition in the powder mixture

Katerina Skotnicova, Gennady S. Burkhanov, Natalia B. Kolchugina, Miroslav Kursa, Tomas Cegan, Alexander A. Lukin, Ondrej Zivotsky, Pavel A. Prokofev, Jan Jurica, Ying Li

Publisher page

Abstract

Abstract High-coercivity Nd–Fe–B magnets are required for clean energy applications, particularly for hybrid and electric vehicles. This study was focused on the structural design of a Nd2Fe14B-based magnet by precise engineering of its microstructure, which included grain-boundary diffusion and grain-boundary structuring processes, through the introduction of a hydrogenated Tb3Co0.6Cu0.4Hx composition in the powder mixture. A low-rare-earth-metal strip-cast Nd-24.0, Pr-6.5, Dy-0.5, B-1.0, Al-0.2, Fe-balance (wt.%) alloy was used as the base component of the powder mixture. The distributions of the components of the blended powder mixture in the sintered magnet with the added 2 wt% of Tb3Co0.6Cu0.4Hx and stability of the structure-sensitive magnetic parameter (coercive force) during a low-temperature heat treatment were studied. The sample exhibited a high coercive force up to 1480 kA/m at a heavy rare-earth element content in the 2–14–1 phase of ~1 at.%.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnetic Properties of Alloys · Magnetic Properties and Applications · Superconducting Materials and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Optimisation of the processing of Nd-Fe-B with dysprosium addition10.1016/j.jallcom.2009.10.202 ↗
2. 2012 · 928
3. Magnetic Materials and Devices for the 21st Century: Stronger, Lighter, and More Energy Efficient10.1002/adma.201002180 ↗
4. Coercivity enhancement of sintered Nd-Fe-B magnets by efficiently diffusing DyF3based on electrophoretic deposition10.1016/j.jallcom.2015.01.078 ↗
5. Tb nanoparticles doped Nd-Fe-B sintered permanent magnet with enhanced coercivity10.1063/1.3093818 ↗
6. Temperature-dependent Dy diffusion processes in Nd-Fe-B permanent magnets10.1016/j.actamat.2014.09.039 ↗
7. Optimization of the processing of Nd-Fe-B with dysprosium addition10.1016/j.jallcom.2009.10.202 ↗
8. Effect of Terbium addition on the coercivity of the sintered NdFeB magnets10.1016/S1002-0721(10)60300-6 ↗
9. Effect of diffusion annealing on hysteretic properties of sintered Nd-Fe-B magnets10.1134/S0031918X11040107 ↗
10. Distribution of Dy in high-coercivity (Nd, Dy)-Fe-B sintered magnet10.1016/j.actamat.2011.01.046 ↗
11. Improvement of corrosion resistance in Nd-Fe-B magnets through grain boundaries restructuring10.1016/j.matlet.2012.01.100 ↗
12. Microstructure and magnetic properties of NdFeB sintered magnets diffusion-treated with Cu/Al mixed DyCo alloy-powder10.1515/amm-2017-0189 ↗
13. Changes of microstructure and magnetic properties of Nd-Fe-B sintered magnets by doping Al-Cu10.1016/j.jmmm.2011.05.029 ↗
14. Microstructure of fine-grained Nd-Fe-B sintered magnets with high coercivity10.1016/j.scriptamat.2011.05.006 ↗
15. Structure and phase composition of Tb3Co0.6Cu0.4 alloys for efficient additions to Nd-Fe-B sintered magnets
16. Coercivity enhancement of Nd-Fe-B sintered magnets with intergranular adding (Pr, Dy, Cu)−Hx powders10.1016/j.jmmm.2015.09.071 ↗
17. Densification of Nd13Fe78NbCoB7-type Sintered Magnet by (Nd, Dy)-Hydride Additions Using a Powder Blending Technique10.1016/S0925-8388(98)00874-3 ↗
18. Magnetic and Microstructural Modification of the Nd-Fe-B Sintered Magnet by Mixed DyF3/DyHx Powder Doping10.1063/1.4867965 ↗
19. Role of Terbium Hydride Additions in the Formation of Microstructure and Magnetic Properties of Sintered Nd-Pr-Dy-Fe-B Magnets10.1134/S207511331303009X ↗
20. Structure and Magnetic Properties of Nd-Fe-B Magnets Prepared from DyH2-Containing Powder Mixtures10.1134/S2075113318030115 ↗
21. Diffusion of Fe Co, Nd, and Dy in R2(Fe1-xCox)14B where R=Nd or Dy10.1016/S0304-8853(01)00378-X ↗
22. In situ TEM study of Nd-rich phase in NdFeB magnet10.1016/j.jmmm.2004.07.035 ↗
23. A study on the Nd-rich phase evolution in the Nd-Fe-B sintered magnet and its mechanism during post-sintering annealing10.1016/j.jallcom.2012.05.075 ↗
24. The role of Cu addition in the coercivity enhancement of sintered Nd-Fe-B permanent magnets10.1557/JMR.2009.0041 ↗
25. The role of Cu in sintered Nd-Fe-B magnets10.1109/TMAG.2012.2202380 ↗
26. The effects of blending additions of copper and cobalt to Nd16Fe76B8 milled powder to produce sintered magnets10.1016/S0304-8853(01)00067-1 ↗
27. Effect of Cu Addition on the Phase Equilibria in Nd-Fe-B Sintered Magnets10.2320/matertrans.MBW200824 ↗
28. Wettability and Interfacial Microstructure between Nd2Fe14B and Nd-Rich Phases in Nd-Fe-B Alloys10.1109/TMAG.2008.2001544 ↗
29. Blending additions of cobalt to Nd16Fe76B8 milled powder to produce sintered magnets10.1016/S0304-8853(00)00109-8 ↗
30. Effects of Cu Nanopowders Addition on Magnetic Properties and Corrosion Resistance of Sintered Nd-Fe-B Magnets10.1016/j.physb.2008.09.002 ↗
31. Grain boundary and interface chemistry of an Nd-Fe-B-based sintered magnet10.1016/j.actamat.2011.10.043 ↗
32. Structure and chemical compositions of the grain boundary phase in Nd-Fe-B sintered magnets10.1016/j.actamat.2016.05.035 ↗
33. Microstructure and magnetic properties of grain boundary modified recycled Nd-Fe-B sintered magnets10.1016/j.jallcom.2016.09.305 ↗
34. The Effect of CuAl Addition on the Magnetic Property, Thermal Stability and Corrosion Resistance of the Sintered NdFeB Magnets10.1063/1.5008766 ↗
35. The origin of the coercivity reduction of Nd-Fe-B sintered magnet annealed below an optimal temperature10.1016/j.jmmm.2013.04.044 ↗
36. On the reversible and fully repeatable increase in coercive field of sintered Nd-Fe-B magnets following post sinter annealing10.1016/j.jmmm.2014.02.025 ↗