journal article·2005-02

Effect of roughness and continuity of Co layers to magnetic properties of Co/Pd multilayers

Shigeki Nakagawa, Hironori Yoshikawa

Publisher page

Abstract

Abstract High Ar gas pressure condition for deposition of Pd interlayers and underlayers in [Co/Pd] N /Pd multilayers caused the increase of surface roughness. Such an increase of surface roughness is strongly related to the decrease of loop gradient factor of M – H loop α ( = 4 π ( d M / d H ) at H = H c ) as well as large increase of coercivity H c . In order to confirm the effect of continuity of grains in Co/Pd multilayer, we tried to deposit [Co/Pd] 20 multilayer in which the Co and Pd layers were deposited at different Ar gas pressure for each layer. When Pd layer was deposited at low P Ar , the multilayer did not reveal high H c . The deposition of Pd layers at high P Ar enhances average surface roughness R a of the multilayers. High H c and low α seem to be attributed to the discontinuity of the Co layers which causes the surface roughness. P Ar condition for the deposition of Co affected strongly to α , which is strongly correlated to the continuity of the layer in the lateral direction.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnetic properties of thin films · Magnetic Properties of Alloys · Scientific Research and Discoveries

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (4)

Show source-provided references
1. Hoon-Sang Oh · IEEE Trans. Magn. · 1996 · 32 · 406110.1109/20.539263 ↗
2. Onoue · J. Magn. Magn. Mater. · 2001 · 235 · 8210.1016/S0304-8853(01)00304-3 ↗
3. Geshev · J. Magn. Magn. Mater. · 2001 · 226–230 · 171110.1016/S0304-8853(00)00868-4 ↗
4. Hashimoto · J. Magn. Magn. Mater. · 1990 · 88 · 21110.1016/S0304-8853(97)90031-7 ↗