Definition of a magnetic susceptibility of conglomerates with magnetite particles. Particularities of defining single particle susceptibility
Source abstract
Abstract
Abstract Data of a magnetic susceptibility of ferro-and the ferrimagnetic particles of many technogenic, natural, special media are especially demanded for the solution of various tasks connected with purposeful magnetic impact on these particles. One of productive approaches to definition of a magnetic susceptibility χ of these particles consists in receiving experimental data of a susceptibility of disperse samples 〈 χ 〉 with a disperse phase of these particles. The paper expounds and analyses the results of experiments on defining (by Faraday method in a magnetic field with intensity H = 90–730 kA/m) the magnetic susceptibility 〈 χ 〉 of disperse samples (conglomerates) with a given volume ratio γ of magnetite particles (γ = 0.0065–0.25). The corresponding families of concentration and field dependences are provided alongside with discussing the applicability of linear and exponential functions to describe these dependences. We consider the possibility of defining single particles susceptibility χ (with simultaneous obtaining field dependence of this susceptibility) by the commonly used relation χ = 〈 χ 〉 /γ both at relatively small (preferable for accuracy reasons) values γ – to γ = 0.02…0.025, as well as at increased values γ – up to γ = 0.25. The data χ are provided depending on H and correlating with known data at H It is specified that in the studied (post-extreme) area of H both variants of obtained field dependencesχare functionally identical within the accuracy of a constant, and close to an exponential dependence χ ∼ 1/H0.75. With the account for the defined here value of constant-multiplier (0.8), it provides the grounds for obtaining valid data χ, employing the results of measuring 〈 χ 〉 for conglomerates with not obligatory small values of γ. It is demonstrated that being obtained by data χ, the calculated field dependence of the particle matter magnetic susceptibility χm (for the case when the particles are traditionally likened to balls with the characteristic for them demagnetising factor equalling 1/3) complies with the anticipated inverse function χm ∼ 1/H in the studied area H (where magnetization M expressed as M = χH reaches saturation M = Const).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Geomagnetism and Paleomagnetism Studies · Minerals Flotation and Separation Techniques · Magnetic and Electromagnetic Effects
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. B. Fuchs, M. Stolarski, K. Keller, W. Stahl, H. Nirschl, A new approach of magnetic separation, AIChE Annual Meeting Conference Proceedings, 2005, pp.14314 14322.
2. The effect of magnetic susceptibility on the motion of particles in a ferrohydrostatic separator10.1080/07313630290002581 ↗
3. O-chip free-flow magnetophoresis: continuous flow separation of magnetic particles and agglomerates10.1021/ac049183o ↗
4. Analytical model for the magnetophoretic capture of magnetic microspheres in microfluidic devices10.1016/j.jmmm.2007.11.024 ↗
5. Two-dimensional flow magnetophoresis of microparticles10.1007/s00216-012-6016-5 ↗
6. Magnetohydrodynamics in narrow fluidic channels in presence of spatially non-uniform magnetic fields: framework for combined magnetohydrodynamic and magnetophoretic particle transport10.1007/s10404-012-1001-z ↗
7. Lagrangian Magnetic Particle Tracking Through Stenosed Artery Under Pulsatile Flow Condition10.1115/1.4026839 ↗
8. Xinyu WU, Huiying WU, A Numerical Study on Separation Characteristics of Magnetic Particles in Magnetophoretic Chip Microchannels. Proceedings of the ASME 2009 2nd Micro/Nanoscale Heat & Mass Transfer International Conference (MNHMT2009). Shanghai. December 18-21, 2009.
9. Sandulyak · 1988
10. Special solutions for magnetic separation problems using force and energy conditions for ferro-particles capture10.1016/j.jmmm.2015.10.108 ↗
11. Sandulyak D., Snedkov A., Sandulyak A.A., Sandulyak A.V., Ablaeva A, Functional Properties of Granular and Quasi-granular Ferromagnetic Material (Filter-matrix) in Magnetophoresis Technology, in: Proceedings of the International Conference on «Materials Engineering for Advanced Technologies». London. June 2015. ISBN: 978-1-61275-109-2. pp. 663–665.
12. Patent USA №4492921. Sandulyak A.V., Garaschenko V.I., Korkhov O.J., Method of Determining the Quantity of Solid Fraction of Ferromagnetic Matter in a Fluid. 1985.
13. Feasibility study of MEMs technique for characterizing magnetic susceptibility of subcellular organelles10.1115/1.3591391 ↗
14. Magnetic design considerations for devices and particles used for biological high-gradient magnetic separation (HGMS) systems10.1016/S0304-8853(00)01250-6 ↗
15. Analysis of magnetic drug carrier particle capture by a magnetizable intravascular stent – 2: parametric study with multi-wire two-dimensional model10.1016/j.jmmm.2005.01.080 ↗
16. A magnetic filter with permanent magnets on the basis of rare earth10.1016/S0304-8853(03)00502-X ↗
17. Magnetic separation from superparamagnetic particle suspensions10.1016/j.jmmm.2009.01.034 ↗
18. Permanent magnet applications10.1016/S0304-8853(02)00335-9 ↗
19. Macroscopic model of particles’ capture by the elliptic cross-section collector in magnetic separator10.1016/j.jmmm.2003.12.963 ↗
20. High-efficiency magnetophoretic separation based on synergy of magnetic force field and flow field in microchannels10.1007/s11431-011-4593-8 ↗
21. Free-flow magnetophoresis – separation of magnetic microparticles and agglomerates on chip
22. Enhancement of separation efficiency on continuous magnetophoresis by utilizing L/T-shaped microchannels10.1007/s10404-011-0768-7 ↗
23. Effects of particle–fluid coupling on particle transport and capture in a magnetophoretic microsystem10.1007/s10404-011-0898-y ↗
24. Magnetic field strength requirements to capture superparamagnetic nanoparticles within capillary flow10.1007/s11051-010-9885-6 ↗
25. H.L. Wamocha, R. Asmatulu, T.S. Ravigururajan. Hydrodynamic Behavior of Magnetic Nanocomposite Spheres Under Magnetic Fields, in: Proceedings of the ASME 2011 International Mechanical Engineering Congress & Exposition (IMECE2011), Denver, Colorado. November 11-17, 2011.10.1115/IMECE2011-62762 ↗
26. Magnetic separator with transversally magnetized disk permanent magnets10.1016/S0892-6875(02)00043-2 ↗
27. Magnetic separation in microfluidic systems using microfabricated electromagnets – experiments and simulations10.1016/j.jmmm.2005.01.079 ↗
28. Surfactant effects on the mechanism of particle capture in high-gradient magnetic filtration10.1016/j.seppur.2006.02.001 ↗
29. Separation of magnetic affinity biopolymer adsorbents in a Davis tube magnetic separator10.1023/A:1010578816964 ↗
30. Magnetic separation and magnetic properties of low-grade manganese carbonate ore10.1007/s11837-014-1212-8 ↗
31. A model for predicting magnetic particle capture in a microfluidic bioseparator10.1007/s10544-007-9050-x ↗
32. Advanced magnetic oil filtration extends equipment life
33. The applicability of Davis tube tests to ore separation by drum magnetic separators10.1080/1478647031000101223 ↗
34. Mishima F., Terada T., Akiyama Y., zumi Y., Okazaki H., Nishijima S. Research and development of superconducting magnetic separation system for powdered products, IEEE Transactions on Applied Superconductivity 2008. 18 (2), art. no.4520245, pp. 824-827.
35. Microfabricated magnetic sifter for high-throughput and high-gradient magnetic separation10.1016/j.jmmm.2009.02.062 ↗
36. Effect of process on the magnetic properties of bonded NdFeB magnet10.1016/j.jmmm.2005.03.094 ↗
37. Updated magnetic separation techniques to improve grinding circuit efficiency10.1016/S0892-6875(04)00195-5 ↗
38. High gradient magnetic particle separation in viscous flows by 3D BEM10.1007/s00466-012-0729-3 ↗
39. Removing iron by magnetic separation from a potash feldspar ore10.1007/s11595-013-0696-3 ↗
40. On the magnetic field architecture required to capture superparamagnetic nanoparticles in a microcapillary flow10.1007/s11051-009-9615-0 ↗
41. Bulk magnetic susceptibility measurements for determination of fly ash presence in concrete10.1016/j.cemconres.2008.11.004 ↗
42. Percolative behaviour and demagnetizing effects in disordered heterostructures10.1016/S0304-8853(02)01232-5 ↗
43. Effect of chemical state of dispersed phase on magnetic filtration efficiency10.1081/SS-200028783 ↗
44. Determination of the capture radii of magnetite bearing hydroxide flocs in magnetic filtration10.1109/20.728301 ↗
45. A mathematical model of concentrate solids content for the wet drum magnetic separator10.1016/S0301-7516(02)00150-3 ↗
46. The mechanism of magnetics capture in the wet drum magnetic separator10.1016/S0892-6875(00)00007-8 ↗
47. Optimizing colloidal dispersity of magnetic nanoparticles based on magnetic separation with magnetic nanowires array10.1007/s00339-014-8758-8 ↗
48. Raúl Terrazas Reza, Carlos A. Martínez Pérez, Claudia A. Rodríguez González, Humberto Monreal Romero, Perla E. García Casillas. Effect of the polymeric coating over Fe3O4 particles used for magnetic separation, Central European Journal of Chemistry, 2010, 8(5), 1041-104610.2478/s11532-010-0073-4 ↗
49. Magnetic BaFe12O19 nanofiber filter for effective separation of Fe3O4 nanoparticles and removal of arsenic10.1007/s11051-014-2787-2 ↗