Magnetic and microstructural investigation of high-coercivity net-shape Nd–Fe–B-type magnets produced from spark-plasma-sintered melt-spun ribbons blended with DyF3
Source abstract
Abstract
Abstract Nanostructured Nd–Fe–B-type materials produced by melt-spinning (MS) are used in a variety of applications in the electronics, automotive, and sensor industries. The very rapid MS process leads to flake-like powders with metastable, nanoscale, Nd 2 Fe 14 B grains. These powders are then formed into net-shaped, isotropic, polymer-bonded magnets, or they are hot formed into fully dense, metallic magnets that are isotropic and anisotropic. These fully dense magnets are usually produced with a conventional hot press without the inclusion of additives prior to the hot pressing. As a result, their properties, particularly the coercivity ( H ci ), are insufficient at automotive-relevant temperatures of 100–150 °C since the material H ci has a large temperature coefficient. In this study, we instead add a thin layer of DyF 3 to the melt-spun ribbons prior to their hot consolidation in order to enhance the coercivity through a diffusion-based, partial substitution of the Nd by Dy. This is accomplished by applying extremely rapid, spark-plasma sintering to minimize any growth of the nanoscale Nd 2 Fe 14 B grains during consolidation. The result is a very high-coercivity magnet with drastically reduced amounts of heavy rare earths that is suitable for high-temperature applications. This work clearly demonstrates how rapidly formed, metastable states can provide us with properties that are unobtainable with conventional techniques.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnetic Properties of Alloys · Magnetic properties of thin films · Magnetic and transport properties of perovskites and related materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Current status and recent topics of rare-earth permanent magnets10.1088/0022-3727/44/6/064001 ↗
2. Magnetic materials and devices for the 21st century: stronger, lighter, and more energy efficient10.1002/adma.201002180 ↗
3. Rare-earth supply restrictions: market failures, not scarcity, hamper their current use in high-tech applications10.1021/es503548f ↗
4. Magnetization and magnetic-anisotropy of R2Fe14B measured on single-crystals10.1063/1.336611 ↗
5. The Economist, Print Edition, 22 Jan 2011.
6. Dysprosium-free melt-spun permanent magnets
7. Rare-earth economics: the balance problem10.1007/s11837-013-0639-7 ↗
8. Magnetic properties of extremely small Nd-Fe-B sintered magnets10.1109/TMAG.2005.854874 ↗
9. Coercivity enhancement by the grain boundary diffusion process to Nd–Fe–B sintered magnets10.1109/TMAG.2006.879906 ↗
10. Decomposition of DyF3 and its effect on magnetic performance of DyF3-doped Nd-Fe-B-type hot-deformed magnet10.1063/1.4906759 ↗
11. Magnetic and microstructural modification of the Nd–Fe–B sintered magnet by mixed DyF3/DyH x powder doping10.1063/1.4867965 ↗
12. The grain-boundary diffusion process in Nd–Fe–B sintered magnets based on the electrophoretic deposition of DyF310.1016/j.intermet.2011.11.014 ↗
13. Temperature-dependent Dy diffusion processes in Nd-Fe-B permanent magnets10.1016/j.actamat.2014.09.039 ↗
14. Enhancement of coercivity of hot-deformed Nd-Fe-B anisotropic magnet by low-temperature grain boundary diffusion of Nd60Dy20Cu20 eutectic alloy10.1016/j.scriptamat.2013.07.011 ↗
15. Microstructure of high coercivity Nd-Fe-Co-Ga-B hot-deformed magnet improved by the Dy diffusion treatment10.1016/j.jallcom.2012.12.084 ↗
16. Distribution of Dy in high-coercivity (Nd,Dy)–Fe–B sintered magnet10.1016/j.actamat.2011.01.046 ↗
17. Properties enhancement and recoil loop characteristics for hot deformed nanocrystalline NdFeB permanent magnets10.1088/1757-899X/60/1/012013 ↗
18. Effect of dysprosium-compounds treatement on coercivity of Nd-Fe-B sintered magnets10.2174/1573413709666131111224235 ↗
19. Dy-distribution in the grain of high-energy (Nd, Dy)-Fe-B Magnets10.1109/20.489589 ↗
20. Shaping of nanostructured materials or coating through Spark Plasma Sintering
21. Sintering, consolidation, reaction and crystal growth by the spark plasma system (SPS)10.1016/S0921-5093(00)00773-5 ↗
22. Microstructure and property evolution of isotropic and anisotropic NdFeB magnets fabricated from nanocrystalline ribbons by spark plasma sintering and hot deformation10.1088/0022-3727/44/2/025003 ↗
23. Enhanced coercivities in die-upset Nd-Fe-B magnets with diffusion-alloyed additives (Zn, Cu, and Ni)10.1063/1.102934 ↗
24. Diffusion processes in hot-deformed Nd-Fe-B magnets with DyF3 additions10.1016/j.jmmm.2014.01.055 ↗
25. Electrical and magnetic properties of hot-deformed Nd-Fe-B magnets with different DyF3 additions10.1063/1.4822026 ↗
26. Improved hot workability and magnetic properties in NdFeCoGaB hot deformed magnets10.1109/20.908772 ↗
27. Microstructure evolution of hot-deformed Nd-Fe-B anisotropic magnets10.1063/1.4867960 ↗
28. Model of temperature field for the preparation process of melt-spun NdFeB powders10.1016/S1002-0721(14)60101-0 ↗
29. Effects of sintering temperature on the mechanical properties of sintered NdFeB permanent magnets prepared by spark plasma sintering10.1016/j.jmmm.2013.08.044 ↗
30. On the valence changes of lanthanide elements in compounds and the enthalpies of formation and stabilities of their dihalides10.1016/0022-5088(79)90110-3 ↗