journal article·2020-05Open access

Loss decomposition in plastically deformed and partially annealed steel sheets

F.J.G. Landgraf, C. Ragusa, D. Luiz Rodrigues, M.B.S. Dias, O. de la Barrière, F. Mazaleyrat, F. Fiorillo, C. Appino, L. Martino

Abstract

Abstract There is increasing interest in the optimization of non-oriented electrical steels for applications under excitation frequencies above 400 Hz. We discuss in this paper the possibility of a new manufacturing procedure, where skin-pass and subsequent heat treatment for recovery are applied as the two last stages of sheet processing. Samples from a commercial non-oriented 3 wt% silicon steel were submitted to 2.5% thickness reduction and were heat treated at temperatures ranging between 600 and 850 °C for 2 h. It is shown that, although the hysteresis loss increases with plastic deformation, the excess loss decreases in such a way that under increasing magnetizing frequencies the total energy loss of the deformed and recovered sample becomes lower than in the starting material. The higher the annealing temperature the lower the frequency at which crossover of the loss curves is observed, as long as full recrystallization does not occur. It is assumed that with the dislocation structures left in the deformed and partially recovered samples one achieves a condition of increased fragmentation of the magnetization process, that is, of increased number of concurring correlation regions (Magnetic Objects). The corresponding decrease of the excess loss component can eventually overcompensate the deterioration of the quasi-static magnetic properties, leading to lower total losses.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnetic Properties and Applications · Microstructure and Mechanical Properties of Steels · Magnetic properties of thin films

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. Electrical steels for e-mobility [online]. Available: https://www.voestalpine.com/isovac/en/Fields-of-application/E-mobility.
2. iCARe®: ArcelorMittal’s range of electrical steels for automotive [online]. Available: https://automotive.arcelormittal.com/icare_range.
3. Nippon Steel Non-Oriented Electrical Steel Sheets Catalog [online]. Available: https://www.nipponsteel.com/product/catalog_download/pdf/D005je.pdf.
4. powercore® for e-mobility and high frequencies [online]. Available: https://www.thyssenkrupp-steel.com/en/products/electrical-steel/electrical-steel-non-grain-oriented/powercore-for-high-frequencies-and-e-mobility/powercore-a-3.html.
5. Soft Magnetic Materials
6. Effect of rolling strain on the loss separation and permeability of lamination steels10.1109/20.312260 ↗
7. Loss separation and parameters for hysteresis modelling under compressive and tensile stresses10.1016/j.jmmm.2003.11.381 ↗
8. Effect of plastic deformation on the magnetic properties of non-oriented electrical steels10.1016/S0304-8853(00)00075-5 ↗
9. Magnetic hysteresis in plastically deformed low-carbon steel laminations10.1016/j.jmmm.2007.03.120 ↗
10. Effect of plastic deformation on the excess loss of electrical steel10.1109/TMAG.2011.2174214 ↗
11. Hysteresis and loss measurements on the plastically deformed Fe–(3 wt%)Si under sinusoidal and triangular external field10.1109/TMAG.2016.2530683 ↗
12. The effect of recovery annealing on the magnetic and mechanical properties of nonoriented electrical steels
13. General properties of power losses in soft ferromagnetic materials10.1109/20.43994 ↗
14. Recrystallization and grain growth10.1016/0502-8205(52)90009-9 ↗
15. Nucleation and growth during recrystallization10.1590/S1516-14392005000300002 ↗
16. A simple compensation method for the accurate measurement of magnetic losses with a single strip tester10.1109/TMAG.2016.2527829 ↗
17. F. Fiorillo, Measurement and characterization of magnetic materials, North-Holland, 2004.10.1016/B978-012257251-7/50009-5 ↗
18. A three-phase single sheet tester with digital control of flux loci based on the contraction mapping principle10.1016/j.jmmm.2006.02.177 ↗
19. Predicting loss in magnetic steels under arbitrary induction waveform and with minor hysteresis loops10.1109/TMAG.2004.830510 ↗
20. Effect of plastic strain on magnetic and mechanical properties of ultralow carbon sheet steel10.1063/1.364796 ↗
21. Influence of the dislocation structures on the magnetic and magnetomechanical properties of high-purity iron10.1109/TMAG.1981.1061496 ↗
22. Power losses in thick steel laminations with hysteresis10.1063/1.361873 ↗
23. Magnetic hysteresis and Barkausen noise in plastically deformed steel sheets10.3390/met8010015 ↗