journal article·2016-01

Modeling of the interleaved hysteresis loop in the measurements of rotational core losses

Natheer Alatawneh, Pragasen Pillay

Publisher page

Abstract

Abstract The measurement of core losses in machine laminations reveals a fundamental difference between rotational and pulsating types. Rotational core losses under rotating fields decrease at high flux density, while pulsating losses keep increasing steadily. Experimental analyses of loss components Px and Py in x and y directions with rotating fields show that the loss decreases in one loss component and sometimes attains negative values. Tracking the evolution of hysteresis loops along this loss component discloses a peculiar behavior of magnetic hysteresis, where the loop changes its path from counterclockwise to clockwise within a cycle of magnetization process, the so called interleaved hysteresis loop. This paper highlights a successful procedure for modeling the interleaved hysteresis loop in the measurement of rotational core losses in electrical machine laminations using the generalized Prandtl–Ishlinskii (PI) model. The efficiency of the proposed model is compared to Preisach model. Results and conclusion of this work are of importance toward building an accurate model of rotational core losses.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnetic Properties and Applications · Piezoelectric Actuators and Control · Force Microscopy Techniques and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. Iványi · 1997
2. K. Alkar, Measuring Power Losses of Electrical Steel Sheets in One-and Two-Dimensional Magnetic Fields, MSc Thesis, Helsinki University of Technology, 2009.
3. Inverted hysteresis loops in annealed Co–Nb–Zr and Co–Fe–Mo–Si–B amorphous thin films10.1016/S0304-8853(01)01195-7 ↗
4. Inverted hysteresis and giant exchange bias in La0.7Sr0.3MnO3/SrRuO3 superlattices10.1063/1.3470101 ↗
5. Inverted surface hysteresis loops in heterogeneous (nanocrystalline/amorphous) Fe81Nb7B12 alloys10.1134/1.1783412 ↗
6. Clockwise Jiles-Atherton Hysteresis Model10.1109/TMAG.2013.2246144 ↗
7. N. Alatawneh, P. Pillay, The minor hysteresis loop under rotating magnetic fields in machine laminations, in: Proceedings of the IEEE 2013 Energy Conversion Congress and Exposition (ECCE), 2013, pp. 3172–317910.1109/ECCE.2013.6647116 ↗
8. Adedoyin · 2009
9. Macki · 1993 · 35 · 94
10. Mathematical models of hysteresis
11. Design of a novel test fixture to measure rotational core losses in machine laminations10.1109/TIA.2012.2209849 ↗
12. Calculation of the rotational power loss in electrical steel laminations from measured H and B10.1109/20.281225 ↗
13. Ward · 1960
14. Winch · 1963
15. J. Sievert, Studies of measurement of two-dimensional magnetic phenomena in electrical sheet steel at PTB, in: Presented at the 1st International Workshop on Magnetic Properties of Electrical Sheet Steel under Two-Dimensional Excitation, Braunschweig, Germany, Sep. 1991, pp. 102–116.
16. M. Enokizono, M. Kumoi, Two-dimensional Modelling of Magnetic Materials for Simulation, in: Presented at the 1st International Workshop on Magnetic Properties of Electrical Sheet Steel under Two-Dimensional Excitation, Braunschweig, Germany, Sep. 1991, pp. 53–64.
17. Krasnoselskii · 1989
18. Visintin · 1994
19. M. Brokate, J. Sprekels, Hysteresis and Phase Transitions, New York, 1996.10.1007/978-1-4612-4048-8 ↗
20. An Analytical Generalized Prandtl–Ishlinskii model inversion for hysteresis compensation in micropositioning control10.1109/TMECH.2010.2052366 ↗
21. M. Al Janaideh, M. Jianqin, S. Rakheja, X. Wenfang, S. Chun-Yi, Generalized Prandtl–Ishlinskii hysteresis model: hysteresis modeling and its inverse for compensation in smart actuators, in: Proceeding of the 47th IEEE Conference on Decision and Control, 2008, pp. 5182–5187.10.1109/CDC.2008.4739202 ↗
22. Nonlinear semigroup methods in problems with hysteresis
23. A Generalized inertial-dependent prandtl-ishlinskii model for wide-band frequency piezoelectric actuator
24. A generalized Prandtl–Ishlinskii model for characterizing the hysteresis and saturation nonlinearities of smart actuators10.1088/0964-1726/18/4/045001 ↗
25. Inverse control of systems with hysteresis and creep10.1049/ip-cta:20010375 ↗
26. Schilling · 2000
27. Atkinson · 1993
28. An identification method of play model with input-dependent shape function10.1109/TMAG.2005.854892 ↗
29. Kuczmann · 2008
30. Comparison of Preisach and Jiles–Atherton models to take into account hysteresis phenomenon for finite element analysis10.1016/S0304-8853(02)01463-4 ↗
31. Shirley · 2003
32. Mayergoyz · 2003
33. Torre · 1999
34. Identification procedures of Preisach model10.1109/20.996215 ↗
35. W.S. Galinaitis, D.S. Joseph, R.C. Rogers, Parameter identification for Preisach models of hysteresis, in: Proceedings of the DETC 2001, ASME Design Engineering Technical Conference, March 2001, pp. 267–277.10.1115/DETC2001/VIB-21468 ↗
36. Hysteresis parameter identification with limited experimental data10.1109/TMAG.2004.833427 ↗
37. A least squares method for finding the preisach hysteresis operator from measurements10.1007/BF01389337 ↗
38. Adaptive identification and control of hysteresis in smart materials10.1109/TAC.2005.849215 ↗