journal article·2017-04

Enhanced method of magnetic powder alignment for production of PLP Nd-Fe-B magnets

A.G. Popov, O.A. Golovnia, A.V. Protasov

Publisher page

Abstract

Abstract It is demonstrated how the high degree of powder alignment in PLP magnets can be achieved by loading the powder into a container placed in a magnetic field of moderate strength. The strip-cast alloy with a composition of 30.00 Nd, 1.95 Dy, 66.42 Fe, 0.99 B, 0.54 Co, 0.1 Ga (wt%) was subjected to hydrogen decrepitation and then milled in a vibratory mill in toluene to an average particle size of 2.9 µm determined by the FSSS method. The powder was compacted in the magnetic field of 0.2 – 1.2 T to the filling density 2.6 – 3.2×103 kg/m3. It is shown that loading the powder into a container placed in a magnetic field enhances the degree of powder alignment in sintered Nd-Fe-B magnets produced from non-pressed powder. At the filling density less than 3.2×103 kg/m3, the density of magnets is high but insufficient, because of the formation of magnetostatic chains of particles, which impedes the powder compaction. The simulation by the discrete-element method qualitatively proves that the magnetostatic interaction of the chains of particles that are formed in the course of loading in the magnetic field stimulates a decrease in the density of the sintered magnets and its non-uniform distribution over the sample. As a result of the optimization of the parameters of the alignment and compaction of the powder loaded in a magnetic field, PLP magnets with Br ≥1.34 T, Нc ≥950 kA/m, (BH)max ≥340 kJ/m3, and the degree of alignment exceeding 96% were produced.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnetic Properties of Alloys · Magnetic and Electromagnetic Effects · Powder Metallurgy Techniques and Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. M. Sagawa, Y. Une, A new process for producing Nd-Fe-B sintered magnets with small grain size, Proc. 20th Int. Workshop on Rare Earth Permanent Magnets and Their Applications (Knossos-Crete, 2008), pp.103–105
2. The origin of coercivity decrease in fine grained Nd-Fe-B sintered magnets10.1016/j.jmmm.2008.10.032 ↗
3. M. Sagawa, Development and prospect of the Nd-Fe-B sintered magnets, Proc. of 21st Int. Workshop on REPM and their Applications (Bled, Slovenia, 2010), pp. 183–410
4. Microstructure of fine-grained Nd-Fe-B sintered magnets with high coercivity10.1016/j.scriptamat.2011.05.006 ↗
5. The origin of coercivity enhancement in newly prepared high coercivity Dy-free Nd-Fe-B sintered magnets10.1063/1.4803131 ↗
6. Preparation of sintered Nd-Fe-B magnets by pressless process10.1134/S0031918X12040096 ↗
7. Effect of Additions of Zinc Stearate on the Properties of Sintered Nd-Fe-B Magnets10.1134/S0031918X13040066 ↗
8. Effect of addition of esters of fatty acids on the microstructure and properties of sintered Nd-Fe-B magnets produced by PLP10.1016/j.jmmm.2015.03.069 ↗
9. Pressless process in route of obtaining sintered Nd-Fe-B magnets
10. Granular flow down an inclined plane: Bagnold scaling and rheology10.1103/PhysRevE.64.051302 ↗
11. Jamming transition in emulsions and granular materials10.1103/PhysRevE.72.011301 ↗
12. Attractive particle interaction forces and packing density of fine glass powders10.1038/srep06227 ↗
13. Pöschel · 2005
14. A study on tangential force laws applicable to the discrete element method (DEM) for materials with viscoelastic or plastic behavior10.1016/j.ces.2007.11.025 ↗
15. DEM simulation of particles of complex shapes using the multisphere method: application for additive manufacturing10.1063/1.4811898 ↗
16. Dynamic simulation of particle packing influenced by size, aspect ratio and surface energy10.1007/s10035-013-0413-0 ↗
17. Particle-based simulation of powder application in additive manufacturing10.1016/j.powtec.2015.10.035 ↗
18. Stability of chains of permeable spherical beads in an applied magnetic field10.1063/1.337666 ↗
19. 3-D simulation of magnetic particles' behavior during compaction in a magnetic field10.1016/S0032-5910(99)00239-9 ↗
20. PD-simulation of powder compaction for Nd-Fe-B magnets10.1016/S0304-8853(98)00724-0 ↗
21. Extended particle-based simulation for magnetic-aligned compaction of hard magnetic particles10.1016/j.jmmm.2015.08.018 ↗
22. Discrete element method simulation of cohesive particles mixing under magnetically assisted impaction10.1016/j.powtec.2013.03.043 ↗
23. Alignment of magnetic uniaxial particles in a magnetic field: simulation10.1016/j.jmmm.2014.04.037 ↗
24. Models, algorithms and validation for opensource DEM and CFD-DEM10.1504/PCFD.2012.047457 ↗
25. LAMMPS Users Manual. 〈http://lammps.sandia.gov〉, Sandia National Laboratories, 2013.
26. Relation between Nd2Fe14B grain alignment and coercive force decrease ratio in NdFeB sintered magnets10.1016/j.jmmm.2013.02.019 ↗
27. Examination of the degree of alignment in sintered Nd-Fe-B magnets by measurements of the remanent polarizations //10.1016/0304-8853(95)01066-1 ↗
28. Your partner for permanent magnets, Magnetfabrik Schramberg GmbH&Co, 1995.
29. Grain non-sphericity effects on the angle of repose of granular material10.1142/S0217979293002754 ↗
30. Static friction phenomena in granular materials: Coulomb law versus particle geometry10.1103/PhysRevLett.71.3963 ↗
31. A clustered overlapping sphere algorithm to represent real particles in discrete element modelling10.1680/geot.8.T.037 ↗
32. A method to model realistic particle shape and inertia in DEM10.1007/s10035-010-0205-8 ↗