journal article·2019-12

Magnetic properties of evenly mixed Fe-Y2O3 nanocomposites synthesized by a facile wet-chemical based route

Deyin Zhang, Mingli Qin, Min Huang, Tong Wu, Baorui Jia, Haoyang Wu, Jidong Ma, Gang Chen, Xuanhui Qu

Publisher page

Abstract

Abstract Evenly mixed Fe-Y2O3 magnetic nanocomposites have been successfully prepared through a facile and rapid wet-chemical based route with two steps. First, a sheet-like mixed oxide precursor was synthesized by solution combustion synthesis using ferric nitrate, yttrium nitrate and glycine as the iron source, yttrium source and fuel, respectively. Subsequently, Fe-Y2O3 nanocomposites with evenly dispersed Y2O3 nanoparticles were prepared through hydrogen reduction of the as-synthesized sheet-like mixed oxide precursor. The phase constituents, morphology, specific surface area and magnetic properties of the Fe-Y2O3 nanocomposites synthesized at different temperatures were studied in details. The Fe-Y2O3 nanocomposite reduced at 400 °C presents a rod-like morphology with a short axis size of ~20 nm and a length of ~60 nm. With the reduction temperature increasing, the average grain size and saturation magnetization of the Fe-Y2O3 nanocomposites gradually increase, while the coercivity and specific surface area decrease. The saturation magnetization value of the Fe-Y2O3 nanocomposite reduced at 600 °C reaches 190.3 emu/g, with an average crystalline size of ~64 nm.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnetic Properties and Synthesis of Ferrites · Multiferroics and related materials · Advanced Condensed Matter Physics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. The challenge of ceramic/metal microcomposites and nanocomposites10.1016/j.pmatsci.2006.09.003 ↗
2. Co-continuous metal-ceramic nanocomposites10.1021/nl050379t ↗
3. Tailored metal-ceramic nanocomposites prepared by redox cycling of polycrystalline Ni-doped yttria stabilized zirconia10.1016/j.scriptamat.2015.09.025 ↗
4. Investigating fracture of nanoscale metal-ceramic multilayers in the transmission electron microscope10.1016/j.scriptamat.2015.12.026 ↗
5. Effect of nano-metal particles on the fracture toughness of metal-ceramic composite10.1016/j.matdes.2012.08.065 ↗
6. Recent trends in nano-based drug delivery systems for efficient delivery of phytochemicals in chemotherapy10.1039/C6RA07802H ↗
7. Magnetic behavior, electromagnetic multiresonances, and microwave absorption of the interfacial engineered Fe@FeSi/SiO2 nanocomposite10.1021/acsanm.8b00055 ↗
8. Facile fabrication of Fe@ MgO magnetic nanocomposites for efficient removal of heavy metal ion and dye from water10.1016/j.powtec.2017.12.003 ↗
9. Synthesis and characterization of Fe-15 wt.% ZrO2 nanocomposite powders by mechanical milling10.1016/j.powtec.2015.10.003 ↗
10. Corrosion-resistive magnetic powder Fe@SiO2 for microwave applications10.1016/j.jallcom.2017.02.250 ↗
11. Low-cost Fe/SiO2 catalysts for continuous Fenton processes10.1016/j.cattod.2016.04.044 ↗
12. Fabrication of the mesoporous Fe@MnO2NPs-MCM-41 nanocomposite: an efficient photocatalyst for rapid degradation of phenolic compounds10.1021/acs.jpcc.5b01907 ↗
13. Reactive spark plasma sintering of mechanically activated α-Fe2O3/Fe10.1016/j.ceramint.2017.07.180 ↗
14. Synthesis of Fe3O4/Fe nanocomposite powder from Fe2O3 and Fe powder by mechanosynthesis. Structural, thermal and magnetic characterisation10.1016/j.jallcom.2014.04.123 ↗
15. Mechanical properties of multilayer Ni-Fe and Ni-Fe-Al2O3 nanocomposite coating10.1016/j.msea.2017.06.009 ↗
16. Tribological performance of Ni-Fe-Al2O3 multilayer coatings deposited by pulse electrodeposition10.1016/j.wear.2017.03.013 ↗
17. Optimization of process parameters to maximize hardness of metal/ceramic nanocomposites produced by high energy ball milling10.1016/j.ceramint.2014.07.063 ↗
18. Magnetic behaviour of nanocrystalline Cu-Fe-Co/Al2O3 composite powders obtained by mechanical alloying10.1016/j.jallcom.2013.05.069 ↗
19. Synthesis and magnetic properties of bulk transparent PMMA/Fe-oxide nanocomposites10.1088/0957-4484/20/18/185607 ↗
20. Electrospun polyimide nanocomposite fibers reinforced with core-shell Fe-FeO nanoparticles10.1021/jp1020033 ↗
21. Effect of lattice strain on structure, morphology and magneto-dielectric properties of spinel NiGdxFe2-xO4 ferrite nano-crystallites synthesized by sol-gel route10.1016/j.jmmm.2018.07.017 ↗
22. Hydrothermal synthesis of CoyZnyMn1-2yFe2O4 nanoferrites: magneto-optical investigation10.1016/j.ceramint.2017.12.233 ↗
23. Atomic structure of nanoclusters in oxide-dispersion-strengthened steels10.1038/nmat3150 ↗
24. Structure and properties of nano-scale oxide-dispersed iron10.1007/s11661-013-2019-x ↗
25. Structure evolution of Y2O3 nanoparticle/Fe composite during mechanical milling and annealing10.1016/j.pnsc.2013.06.009 ↗
26. A Double-nanophase intragranular-oxide-strengthened iron alloy with high strength and remarkable ductility10.1007/s11661-018-05099-4 ↗
27. Solution combustion synthesis of high surface area CeO2 nanopowders for catalytic applications: reaction mechanism and properties10.1021/acsanm.7b00154 ↗
28. Influence of the type of fuel used for the solution combustion synthesis on the structure, morphology and magnetic properties of nanosized NiFe2O410.1016/j.jallcom.2017.01.055 ↗
29. Low-temperature combustion-synthesized nickel oxide thin films as hole-transport interlayers for solution-processed optoelectronic devices10.1002/aenm.201301460 ↗
30. Solution combustion synthesis of nano-crystalline metallic materials: mechanistic studies10.1021/jp408260m ↗
31. Novel one pot stoichiometric synthesis of nickel sulfide nanomaterials as counter electrodes for QDSSCs10.1016/j.matchemphys.2014.08.002 ↗
32. Effect of glucose on the synthesis of iron carbide nanoparticles from combustion synthesis precursors10.1111/jace.14117 ↗
33. High-performance carbon-coated ZnMn2O4 nanocrystallite supercapacitors with tailored microstructures enabled by a novel solution combustion method10.1016/j.jpowsour.2017.12.022 ↗
34. Enhanced visible light photocatalytic activity of Cu-doped SnO2 quantum dots by solution combustion synthesis10.1016/j.jallcom.2017.01.311 ↗
35. One-step solution combustion synthesis of cobalt-nickel oxides/C/Ni/CNTs nanocomposites as electrochemical capacitors electrode materials10.1016/j.jpowsour.2014.10.201 ↗
36. Solution combustion synthesis of metal oxide nanomaterials for energy storage and conversion10.1039/C5NR05299H ↗
37. Solution combustion synthesis of nanoscale materials10.1021/acs.chemrev.6b00279 ↗
38. Structural, morphological, enhanced magnetic properties and antibacterial bio-medical activity of rare earth element (REE) cerium (Ce3+) doped CoFe2O4 nanoparticles10.1016/j.jmmm.2018.09.089 ↗
39. Enhanced magnetization in highly crystalline and atomically mixed bcc Fe-Co nanoalloys prepared by hydrogen reduction of oxide composites10.1039/c2nr33467d ↗
40. Random and uniform anisotropy in soft magnetic nanocrystalline alloys10.1016/j.jmmm.2009.07.087 ↗
41. Facile synthesis of sheet-like Fe/C nanocomposites by a combustion-based method10.1016/j.jallcom.2016.11.021 ↗
42. Substitution effect of Cr3+ on hyperfine interactions, magnetic and optical properties of Sr-hexaferrites10.1016/j.ceramint.2018.06.033 ↗
43. Effect of surfactants (PVB/EDTA/CTAB) assisted sol-gel synthesis on structural, magnetic and dielectric properties of NiFe2O4 nanoparticles10.1016/j.ceramint.2018.08.317 ↗