Recycling of solid oxide electrolyzer stacks
Source abstract
Abstract
In recent years, hydrogen has become an increasingly important energy carrier, replacing fossil fuels. In this context, electrolyzers have become a focal point of global research, as they facilitate the production of green hydrogen. Among electrolyzers, solid oxide electrolyzers are one of the most widely researched due to their high efficiency and their variability in terms of fuels and operation as fuel cells. However, due to the use of critical materials in combined with a relatively short operational lifespan, the development of recycling strategies is becoming increasingly crucial if these electrolyzers are to become a sustainable option for green hydrogen production. This study proposes the first comprehensive recycling scheme for solid oxide electrolyzer stacks. Data on the materials used by electrolyzer manufacturers from around the world was compiled and compared. Based on these materials, published recycling approaches from dismantling, mechanical recycling and metallurgy were combined with additional studies to develop a holistic recycling process aimed at recovering critical raw materials. Options for closed-loop and open-loop reuse were considered and existing gaps and challenges were identified. The current status of recycling solid oxide electrolyzer stacks demonstrates that the principle is feasible and that a significant proportion of the materials used can already be separated and recovered. However, existing gaps, such as the separation of the nickel mesh from interconnects and the separation of various oxygen ion conductors, currently result in materials being downcycled or recycled in an open loop.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Molten salt chemistry and electrochemical processes · Chemical Looping and Thermochemical Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. IEA · 2020
2. From open-loop energy revolutions to closed-loop transition: what drives carbon neutrality?
3. Overview of current development in electrical energy storage technologies and the application potential in power system operation10.1016/j.apenergy.2014.09.081 ↗
4. Assessment of energy storage technologies: a review
5. The prospects for hydrogen as an energy carrier: an overview of hydrogen energy and hydrogen energy systems10.1007/s40974-016-0005-z ↗
6. Hydrogen energy systems: a critical review of technologies, applications, trends and challenges
7. IEA · 2023
8. Hydrogen-based energy systems: current technology development status, opportunities and challenges10.3390/en17010180 ↗
9. Hydrogen production technologies overview10.4236/jpee.2019.71007 ↗
10. Comprehensive review on the techno-economics of sustainable large-scale clean hydrogen production10.1016/j.jclepro.2019.01.309 ↗
11. New end-of-life technologies applicable to FCH products
12. Recycling strategies for solid oxide cells10.1002/aenm.202201805 ↗
13. End-of-life of fuel cell and hydrogen products: a state of the art10.1016/j.ijhydene.2018.09.176 ↗
14. End of life of fuel cells and hydrogen products: from technologies to strategies10.1016/j.ijhydene.2019.01.110 ↗
15. Recycling process for yttria-stabilized tetragonal zirconia ceramics using a hydrothermal treatment10.1007/s10163-006-0168-3 ↗
16. Analysis of lanthanum and cobalt leaching aimed at effective recycling strategies of solid oxide cells10.3390/su14063335 ↗
17. Challenges and prospects of automated disassembly of fuel cells for a circular economy
18. Hydrothermally-assisted recovery of Yttria- stabilized zirconia (YSZ) from end-of-life solid oxide cells
19. Recycling and characterization of end-of-life solid oxide fuel/electrolyzer ceramic material cell components10.1016/j.resconrec.2022.106809 ↗
20. Recycling and reuse strategies for ceramic components of solid oxide cells10.1149/11106.1369ecst ↗
21. Ultrasonic decoating as a new recycling path to separate oxygen side layers of solid oxide cells10.1039/D3GC03189F ↗
22. Scalable recycling and characterization of end-of-life solid oxide cell ceramic component materials
23. Solid oxide fuel cell technology - features and applications10.1016/j.ssi.2004.07.042 ↗
24. Development of interconnect materials for solid oxide fuel cells10.1016/S0921-5093(02)00736-0 ↗
25. High performance ceramic interconnect material for solid oxide fuel cells (SOFCs): Ca- and transition metal-doped yttrium chromite10.1016/j.jpowsour.2011.06.089 ↗
26. Metallic interconnects for solid oxide fuel cell: a review on protective coating and deposition techniques10.1016/j.ijhydene.2016.03.195 ↗
27. Review: influence of alloy addition and spinel coatings on Cr-based metallic interconnects of solid oxide fuel cells10.1016/j.ijhydene.2020.06.234 ↗
28. Development of a new cost effective Fe–Cr ferritic stainless steel for SOFC interconnect10.1016/j.ijhydene.2015.05.125 ↗
29. Alternative and innovative solid oxide electrolysis cell materials: a short review
30. Development of Mn-Co and Mn-Co-CeO2 coatings on Crofer 22 APU steel for solid oxide fuel cell interconnects10.1149/1945-7111/ad0ff9 ↗
31. Coating layer and influence of transition metal for ferritic stainless steel interconnector solid oxide fuel cell: a review10.1016/j.ijhydene.2019.06.155 ↗
32. Progress in metal corrosion mechanism and protective coating technology for interconnect and metal support of solid oxide cells
33. Experimental review of the performances of protective coatings for interconnects in solid oxide fuel cells
34. Solid oxide electrolysis cells – current material development and industrial application10.1039/D3TA02161K ↗
35. Chromium poisoning for prolonged lifetime of electrodes in solid oxide fuel cells - review10.1016/j.ceramint.2020.11.082 ↗
36. Effect of frame material on the creep of solid oxide fuel cell10.1016/j.ijhydene.2019.05.220 ↗
37. Stacking designs and sealing principles for IT-solid oxide fuel cell
38. Review on silicate and borosilicate-based glass sealants and their interaction with components of solid oxide fuel cell10.1002/er.7161 ↗
39. A review of sealing technologies applicable to solid oxide electrolysis cells10.1007/s10853-006-0409-9 ↗
40. Study of sealants for SOFC10.1016/j.ijhydene.2016.07.156 ↗
41. Progress in material selection for solid oxide fuel cell technology: a review10.1016/j.pmatsci.2015.01.001 ↗
42. Progress in material development for low-temperature solid oxide fuel cells: a review10.3390/en14051280 ↗
43. Recent highlights on solid oxide cells, stacks and modules developments at CEA10.1149/11106.1101ecst ↗
44. Development of a versatile and reversible multi-stack solid oxide cell system towards operation strategies optimization10.1149/11106.1677ecst ↗
45. Elcogen
46. Solid oxide stack development at elcogen10.1149/11106.0133ecst ↗
47. Sarl
48. Forschungszentrum Jülich – current activities in SOC development10.1149/10301.0299ecst ↗
49. Repair joining of glass-ceramic sealants for SOC stacks10.1149/10301.1859ecst ↗
50. Manufacturing cost model for planar 5 kWel SOFC stacks at Forschungszentrum Jülich10.1016/j.ijhydene.2020.01.082 ↗
51. Review of progress in solid oxide fuel cells at FuelCell energy10.1149/07801.0077ecst ↗
52. FuelCell Energy Inc
53. Fuelcellmaterials
54. Ningbo SOFCMAN Energy Technology Co., Ltd
55. Experimental analysis of the effect of cathodic CO2 supply to industrial solid oxide fuel cells10.1149/11106.0673ecst ↗
56. SolydEra SpA
57. Long term behavior of solid oxide electrolyser (SOEC) stacks10.1149/09101.2713ecst ↗
58. Performance of a ten-layer reversible solid oxide cell stack (rSOC) under transient operation for autonomous application
59. The Topsoe perspective: from electrode nanostructures to MW scaled SOEC systems10.1149/11106.1125ecst ↗
60. Reactivating the Ni-YSZ electrode in solid oxide cells and stacks by infiltration10.1016/j.jpowsour.2018.01.021 ↗
61. Power-to-fuels via solid-oxide electrolyzer: operating window and techno-economics10.1016/j.rser.2019.04.071 ↗
62. Progress and challenges of cathode contact layer for solid oxide fuel cell10.1016/j.ijhydene.2020.09.147 ↗
63. Electrical contacts between cathodes and metallic interconnects in solid oxide fuel cells10.1016/j.jpowsour.2005.05.010 ↗
64. Novel anode current collector for hydrocarbon fuel solid oxide fuel cells
65. Cathode-side electrical contact and contact materials for solid oxide fuel cell stacking: a review10.1016/j.ijhydene.2017.08.005 ↗
66. Comparative study of perovskites as cathode contact materials between an La0.8Sr0.2FeO3 cathode and a Crofer22APU interconnect in solid oxide fuel cells10.1016/j.jpowsour.2008.11.083 ↗
67. Performance benchmark of planar solid oxide cells based on material development and designs10.1002/ente.202001062 ↗
68. Menzler · 2023 · 2023 · 48
69. Long-term operation of solid oxide fuel cells and preliminary findings on accelerated testing10.1016/j.ijhydene.2020.01.074 ↗
70. SOC degradation: long-term and small-scale effects10.1149/09101.0719ecst ↗
71. Comparison of performance and degradation of large-scale solid oxide electrolysis cells in stack with different composite air electrodes10.1016/j.ijhydene.2014.12.101 ↗
72. Enhanced performance of reversible solid oxide fuel cells by densification of Gd0.1Ce0.9O2−δ (GDC) barrier layer/La0.6Sr0.4Co0.2Fe0.8O3−δ (LSCF6428)-GDC oxygen-electrode interface
73. Effect of CeO2 interlayer on ZrO2 electrolyte/La(Sr)CoO3 cathode for low-temperature SOFCs10.1016/j.ssi.2004.02.018 ↗
74. Kim · 2004
75. Electrolyte supported solid oxide fuel cells with the super large size and thin ytterbia stabilized zirconia substrate10.1016/j.jpowsour.2015.01.058 ↗
76. Recent progress in electrolyte-supported solid oxide fuel cells: a review10.1007/s43207-023-00296-3 ↗
77. Development of nickel based cermet anode materials in solid oxide fuel cells – now and future. Materials reports
78. Electrochemical characterization and modelling of anode and electrolyte supported solid oxide fuel cells
79. Recycling chain for spent Lithium-ion batteries10.3390/met10030316 ↗
80. Kaya · 2019 · 59
81. DIN 8580 · 2003
82. DIN/TS 54405 · 2020
83. Towards a scalable recycling process for ceramics in fuel-electrode-supported solid oxide cells10.1039/D4GC05883F ↗
84. Development of fine particle mechanical separation processes with representative catalyst materials for recycling PEM water electrolyzers exploiting their wetting characteristics10.1002/cctc.202300931 ↗
85. New life cycle inventories for end-of-life solid oxide cells based on novel recycling processes for critical solid oxide cell materials10.1016/j.ijhydene.2024.08.411 ↗
86. Breakage process of mineral processing comminution machines – an approach to liberation10.1016/j.apt.2020.08.005 ↗
87. Schubert · 1989
88. Recycling of raw materials in solid oxide cells: Ultrasonic decoating for mechanical liberation and separation of perovskite materials
89. A study of the reprocessing of fine and ultrafine cassiterite from gravity tailing residues by using various flotation techniques10.1016/j.mineng.2016.06.020 ↗
90. How gangue particle size can affect the recovery of ultrafine and fine particles during froth flotation10.1016/j.mineng.2017.02.005 ↗
91. Fine and ultrafine flotation with the Concorde CellTM – A journey
92. Wills · 2016
93. Liquid–liquid phase transfer of magnetite nanoparticles — evaluation of surfactants10.1016/j.powtec.2012.09.047 ↗
94. A contribution to understanding the flotation behavior of lithium metal oxides and spheroidized graphite for lithium-ion battery recycling
95. Influence of surfactants on selective mechanical separation of fine active materials used in high temperature electrolyzers contributing to circular economy10.1039/D4IM00044G ↗
96. New developments in liquid-liquid extraction, surface modification and agglomerate-free processing of inorganic particles10.1016/j.cis.2018.09.005 ↗
97. Separation of ultrafine particles of alumina and zircon by liquid–liquid extraction using kerosene as the organic phase and sodium dodecylsulfate (SDS) as the surfactant collector for abrasive manufacturing waste recycling10.1016/j.seppur.2013.02.009 ↗
98. Rare-earth separations enhanced by magnetic field
99. A study on the rare earth ore containing scandium by high gradient magnetic separation10.1016/S1002-0721(09)60167-8 ↗
100. High-gradient magnetic separation of compact fluorescent lamp phosphors: elucidation of the removal dynamics in a rotary permanent magnet separator10.3390/min11101116 ↗