Dispersion-promoted synergistic cationic dye removal through the co-introduction of natural diatomite and bentonite into chitosan-based hydrogel beads
Source abstract
Abstract
Hydrogel beads have drawn considerable attention in sustainable wastewater treatment because of their low cost, modifiability, and feasibility. Accordingly, chitosan-based hybrid hydrogel beads were fabricated by incorporating naturally available siliceous micro- and nanoparticles, namely diatomite and bentonite, with different mass ratios. Morphology, swelling behavior, mechanical stability, and ultimately, Methylene Blue (MB) adsorption performance of the hydrogel beads were comprehensively evaluated in terms of filler dispersion and interactions between the fillers and the matrix. Results revealed that while the simultaneous incorporation of inorganic additives inside the chitosan backbone reduced the swelling degree, the mechanical stability was significantly ameliorated when the 1:1 diatomite-bentonite mass ratio was exploited inside the chitosan matrix. That can be attributed to the well-dispersed, and in turn, robust physical interactions between diatomite-bentonite and chitosan. When the hybrid filling system was applied, MB removal efficiency increased synergistically by over 246% compared to bentonite alone and 268% compared to diatomite alone, even at low MB concentration (10 ppm). The MB adsorption kinetics and isotherm were also studied. The adsorption kinetics of MB were well-fitted for all compositions using the Pseudo-Second-Order model. The isotherm data for optimum beads indicate that the Freundlich isotherm model provided the best fit, suggesting the multilayer adsorption with a non-uniform distribution of adsorption heat. These results demonstrate that the coexistence of diatomite and bentonite in chitosan-based hydrogel beads could provide sustainable, highly efficient, cost-effective polymeric absorbents in cationic dye removal applications.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Adsorption and biosorption for pollutant removal · Nanomaterials for catalytic reactions · Water Quality Monitoring and Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (96)
Show source-provided references
1. Recent developments of polysaccharide based superabsorbent nanocomposite for organic dye contamination removal from wastewater — a review10.1016/j.envres.2022.114909 ↗
2. Adsorption behavior of reactive dye in aqueous solution on chemical cross-linked chitosan beads cite this paper adsorption behavior of reactive dye in aqueous solution on chemical cross-linked chitosan beads10.1016/S0045-6535(02)00636-7 ↗
3. Adsorption of dyes in aqueous solutions by chitosan-halloysite nanotubes composite hydrogel beads10.1016/j.micromeso.2014.09.003 ↗
4. Utilization of diatomite/chitosan-Fe (III) composite for the removal of anionic azo dyes from wastewater: equilibrium, kinetics and thermodynamics10.1016/j.colsurfa.2014.12.015 ↗
5. Adsorption behavior of cationic and anionic dyes on magadiite-chitosan composite beads10.1016/j.carbpol.2019.115399 ↗
6. Performance of graphene oxide/SiO2 nanocomposite-based: antibacterial activity, dye and heavy metal removal10.1016/j.arabjc.2022.104450 ↗
7. Removal of methylene blue from wastewater using hydrogel nanocomposites: a review10.1177/18479804211039425 ↗
8. Methylene blue dye: toxicity and potential elimination technology from wastewater
9. Quantitative determination of methylene blue in environmental samples by solid-phase extraction and ultra-performance liquid chromatography-tandem mass spectrometry: a green approach10.1039/C4RA03504F ↗
10. Removal of methylene blue dye from textile wastewater using vertical flow constructed wetland
11. Review on methylene blue: its properties, uses, toxicity and photodegradation10.3390/w14020242 ↗
12. Modification and characterization of hydrogel beads and its used as environmentally friendly adsorbent for the removal of reactive dyes10.1016/j.jclepro.2022.130789 ↗
13. Adsorption of methyl orange from aqueous solution using chitosan/diatomite composite10.2166/wst.2017.034 ↗
14. Optimization of carboxymethyl cellulose hydrogels beads generated by an anionic surfactant micelle templating for cationic dye uptake: swelling, sorption and reusability studies10.1016/j.ijbiomac.2017.07.135 ↗
15. Facile green synthesis of magnetic porous organic polymers for rapid removal and separation of methylene blue10.1021/acssuschemeng.7b00031 ↗
16. Chitosan-polyvinyl alcohol-diatomite hydrogel removes methylene blue from water10.1016/j.ijbiomac.2023.127886 ↗
17. Removal of methylene blue over low-cost mesoporous silica nanoparticles prepared with naturally occurring diatomite10.1007/s10971-018-4859-8 ↗
18. Adsorptive removal of methylene blue dye from aqueous streams using photocatalytic CuBTC/ZnO chitosan composites10.2166/wst.2022.142 ↗
19. Kinetic and thermodynamic study of methylene blue adsorption onto chitosan: insights about metachromasy occurrence on wastewater remediation10.1007/s40974-019-00116-7 ↗
20. Adsorption of methylene blue onto activated carbon produced from steam activated bituminous coal: a study of equilibrium adsorption isotherm10.1016/j.cej.2006.08.015 ↗
21. Alginate-bentonite beads for efficient adsorption of methylene blue dye10.1007/s41207-020-00165-z ↗
22. Fabrication and characterization of low-cost freeze-gelated chitosan/collagen/hydroxyapatite hydrogel nanocomposite scaffold10.1080/1023666X.2018.1562477 ↗
23. Reusable green aerogels from cross-linked hairy Nanocrystalline cellulose and modified chitosan for dye removal10.1021/acs.langmuir.6b03084 ↗
24. Surfactant bilayer on chitosan bead surface for enhanced Ni(II) adsorption
25. Layer-by-layer assembly of chitosan and quince seed gum polyelectrolytes as a pH-responsive, on-off switchable multilayer film for controlled release of ibuprofen10.1016/j.colsurfa.2024.134998 ↗
26. Facile fabrication of magnetic chitosan hydrogel beads and modified by interfacial polymerization method and study of adsorption of cationic/anionic dyes from aqueous solution10.1016/j.jece.2021.105175 ↗
27. Recent advances on composite hydrogels designed for the remediation of dye-contaminated water and wastewater: a review10.1016/j.jclepro.2020.124703 ↗
28. Chitosan-based hydrogel beads: preparations, modifications and applications in food and agriculture sectors – a review10.1016/j.ijbiomac.2020.02.240 ↗
29. Review on recent progress in chitosan-based hydrogels for wastewater treatment application10.1016/j.carbpol.2018.08.070 ↗
30. Chitosan–silica composites for adsorption application in the treatment of water and wastewater from anionic dyes10.3390/ijms241411818 ↗
31. Synthesis of chitosan-silica nanocomposite for removal of methyl orange from water: Composite characterization and adsorption performance
32. Green electrospun membranes based on chitosan/amino-functionalized nanoclay composite fibers for cationic dye removal: synthesis and kinetic studies10.1021/acsomega.1c00480 ↗
33. Surface decoration of microdisk-like g-C3N4/diatomite with ag/AgCl nanoparticles for application in Cr(VI) reduction
34. Overcoming salt crystallization during solar desalination based on diatomite-regulated water supply10.1021/acssuschemeng.9b06102 ↗
35. Removal of dye waste by green adsorbent chitosan-bentonite beads
36. Magnetic chitosan/clay beads: a magsorbent for the removal of cationic dye from water10.1016/j.jmmm.2016.07.022 ↗
37. Fabrication of novel bioactive hydroxyapatite-chitosan-silica hybrid scaffolds: combined the sol-gel method with 3D plotting technique10.1016/j.carbpol.2018.05.086 ↗
38. Epoxy composites with carbon nanotubes and graphene nanoplatelets - dispersion and synergy effects10.1016/j.carbon.2014.07.003 ↗
39. Polyelectrolyte complexes between chitosan and quince seed gum: a rheological, structural, and multiple dye adsorption study10.1007/s10924-022-02634-8 ↗
40. Comparison of dye adsorption of chitosan and polyethylenimine modified bentonite clays: optimization, isotherm, and kinetic studies10.1021/acsomega.3c07509 ↗
41. CO2-activated adsorption: a new approach to dye removal by chitosan hydrogel10.1021/acsomega.8b01825 ↗
42. Green synthesis of ultrapure La(OH)3 nanoparticles by one-step method through spark ablation and electrospinning and its application to phosphate removal10.1016/j.cej.2020.124373 ↗
43. Cost estimation of synthesis and utilization of nano-adsorbents on the laboratory and industrial scales: a detailed review
44. Chitosan-montmorillonite hydrogel beads for effective dye adsorption10.1016/j.jwpe.2022.102928 ↗
45. Sodium alginate/carboxymethyl chitosan-CuO hydrogel beads as a pH-sensitive carrier for the controlled release of curcumin10.1016/j.eurpolymj.2023.112069 ↗
46. Synthesis and swelling behavior of environmentally friendly starch-based superabsorbent hydrogels reinforced with natural char nano/micro particles10.1016/j.jece.2019.103583 ↗
47. One-step synthesis of super-absorbent nanocomposite hydrogel based on bentonite
48. Impact of bimodal particle size distribution ratio of functional calcium carbonate filler on thermal and flowability properties of polyamide 1210.3390/app11020641 ↗
49. Effects of hybrid fillers based on micro- and nano-sized silver particles on the electrical performance of epoxy composites10.1007/s10854-012-0965-5 ↗
50. Recent advances in dual-filler mixed matrix membranes10.1515/revce-2021-0014 ↗
51. A new chitosan–thymine conjugate: synthesis, characterization and biological activity10.1016/j.ijbiomac.2012.01.015 ↗
52. Chitosan-graphene oxide hydrogels with embedded magnetic iron oxide nanoparticles for dye removal10.1021/acsanm.9b01909 ↗
53. Chitosan intercalated bentonite as natural adsorbent matrix for water-soluble sappanwood dye10.1016/j.ijbiomac.2019.02.078 ↗
54. Hybrid porous magnetic bentonite-chitosan beads for selective removal of radioactive cesium in water10.1016/j.jhazmat.2018.08.067 ↗
55. Reinforcing performance of silane-modified recycled nanosilica within sustainable, non-black-filled styrene–butadiene rubber nanocomposites
56. Self-healable hyaluronic acid/chitosan polyelectrolyte complex hydrogels and multilayers10.1016/j.eurpolymj.2019.109268 ↗
57. Impact of diatomite addition on lead immobilization in air pollution control residues from a municipal solid waste incinerator10.1007/s11356-021-17349-x ↗
58. Synthesis of chitosan/diatomite composite as an advanced delivery system for ibuprofen drug; equilibrium studies and the release profile10.1021/acsomega.1c01514 ↗
59. Adsorption of methylene blue onto chitosan–montmorillonite/polyaniline nanocomposite10.1016/j.clay.2021.105993 ↗
60. Adsorption of anionic dyes on a reversibly swelling cationic superabsorbent polymer10.1002/app.37929 ↗
61. Swelling and dye-adsorption characteristics of an amphoteric superabsorbent polymer10.1021/ie301839z ↗
62. A study on the correlation between adsorption and swelling for poly(hydroxamic acid) hydrogels-triarylmethane dyes systems10.1007/s10924-018-1257-9 ↗
63. Dual antioxidant-photosensitizing hydrogel system: cross-linking of chitosan with tannic acid for enhanced photodynamic efficacy10.1016/j.ijbiomac.2021.08.006 ↗
64. Chitosan/banana peel powder nanocomposites for wound dressing application: preparation and characterization10.1016/j.msec.2016.11.104 ↗
65. Advances in chitosan-based nanoparticles for drug delivery10.3390/ijms22179652 ↗
66. Highly degradable chitosan-montmorillonite (MMT) nano-composite hydrogel for controlled fertilizer release10.1007/s11783-023-1653-9 ↗
67. Chitosan/Ag-bentonite nanocomposites: preparation, characterization, swelling and biological properties10.1007/s10904-019-01219-8 ↗
68. Diatomite reinforced chitosan composite membrane as potential scaffold for guided bone regeneration10.1016/j.msec.2017.05.069 ↗
69. Optimization of dye adsorption capacity and mechanical strength of chitosan aerogels through crosslinking strategy and graphene oxide addition10.1016/j.carbpol.2019.02.002 ↗
70. Facile preparation and dye adsorption performance of poly(N-isopropylacrylamide-co-acrylic acid)/molybdenum disulfide composite hydrogels10.1021/acsomega.1c04433 ↗
71. Polyacrylate/(chitosan modified montmorillonite) nanocomposite: water absorption and photostability
72. Water resistance and biodegradation properties of conventionally-heated and microwave-cured cross-linked cellulose nanocrystal/chitosan composite films10.1016/j.polymdegradstab.2021.109563 ↗
73. Preparation of chitosan/calcium alginate/bentonite composite hydrogel and its heavy metal ions adsorption properties10.3390/polym13111891 ↗
74. Highly elastic and superstretchable graphene oxide/polyacrylamide hydrogels
75. pH-Responsive eco-friendly chitosan–chlorella hydrogel beads for water retention and controlled release of humic acid10.3390/w14081190 ↗
76. Macroporous chitosan/polyvinyl alcohol composite adsorbents based on activated carbon substrate10.1007/s10934-016-0359-9 ↗
77. Adsorption behavior of methylene blue dye by novel crosslinked O-CM-chitosan hydrogel in aqueous solution: kinetics, isotherm and thermodynamics10.3390/polym13213659 ↗
78. Chitosan-based dual network composite hydrogel for efficient adsorption of methylene blue dye10.1016/j.ijbiomac.2022.09.213 ↗
79. A state-of-the-art review on biowaste derived chitosan biomaterials for biosorption of organic dyes: parameter studies, kinetics, isotherms and thermodynamics10.3390/polym13173009 ↗
80. Uptake of methylene blue on divinylbenzene cross-linked chitosan/maleic anhydride polymer by adsorption process10.1016/j.colsurfa.2021.127424 ↗
81. Recent advances in adsorption kinetic models: their application to dye types10.1016/j.arabjc.2021.103031 ↗
82. Batch adsorption isotherm models applied in single and multicomponent adsorption systems – a review10.1080/01932691.2021.1964988 ↗
83. Superabsorbent cellulose-clay nanocomposite hydrogels for highly efficient removal of dye in water10.1021/acssuschemeng.6b02178 ↗
84. Enhanced adsorption of methylene blue from aqueous solution by chitosan-g-poly (acrylic acid)/vermiculite hydrogel composites10.1016/S1001-0742(09)60134-0 ↗
85. Characterization and adsorption performance of chitosan/diatomite membranes for Orange G removal10.1515/epoly-2015-0218 ↗
86. Diatomite-chitosan composite with abundant functional groups as efficient adsorbent for vanadium removal: key influencing factors and influence of surface functional groups10.1016/j.molliq.2022.120428 ↗
87. Adsorption of methylene blue onto chitosan–montmorillonite/polyaniline nanocomposite10.1016/j.clay.2021.105993 ↗
88. Graphene oxide-chitosan composite material as adsorbent in removing methylene blue dye from synthetic wastewater
89. Adsorption of dyes in aqueous solutions by chitosan–halloysite nanotubes composite hydrogel beads10.1016/j.micromeso.2014.09.003 ↗
90. Effect of framework structure, pore size and surface modification on the adsorption performance of methylene blue and Cu2+ in mesoporous silica10.1016/j.colsurfa.2017.12.016 ↗
91. Amine and sulfonic acid functionalized mesoporous silica as an effective adsorbent for removal of methylene blue from contaminated water10.1016/j.jksus.2021.101762 ↗
92. Improved adsorption performance of ZIF-8 towards methylene blue dye by hybridization with nanodiamond10.1016/j.jwpe.2022.103254 ↗
93. Surface induced growth of ZIF-67 at co-layered double hydroxide: removal of methylene blue and methyl orange from water
94. Preparation and characterization of polyacrylamide / sodium alginate microspheres and its adsorption of MB dye10.1016/j.colsurfa.2018.12.019 ↗
95. Adsorption characteristic of U(VI) ion onto thermally activated bentonite10.1016/j.jhazmat.2009.07.049 ↗
96. Chemical and thermal activation of clay sample for improvement adsorption capacity of methylene blue10.1080/03067319.2021.1928105 ↗