The Influence of Brushing Motion on the Cutting Efficiency of Two Heat-Treated Endodontic Files: An In-Vitro Micro Computed Tomography Study
Source abstract
Abstract
Background: To assess the cutting efficiency of two heat-treated endodontic files with a brushing motion in oval-shaped canals. Methods: A total of 10 intact lower molars with a single oval distal canal were selected and randomly divided into two groups according to the system used for shaping: 2Shape and Hyflex CM. The instrumentation was performed in two parts: a first shaping according to the manufacturer’s instructions and final shaping using 5 brushing motions on the distal, lingual, and buccal walls, avoiding the danger zones. Micro computed tomography (micro-CT) scans before and after the brushing motion were superimposed at all three levels: coronal, middle, and apical. Canal changes in buccolingual (ΔBL) and mesiodistal (ΔMD) dimensions were measured. Data were statistically analyzed by repeated-measures analyses of variance and the student t-test (p < 0.05). Results: For ΔMD, no significant difference emerged between the 2Shape and Hyflex CM in the apical and coronal thirds. However, the cutting efficiency was significantly greater with the 2Shape in the middle third (p < 0.05). Regarding ΔBL, no statistically significant difference was detected between 2Shape and Hyflex CM comparing the anatomical thirds, while 2Shape had a significant higher cutting efficiency considering the total BL diameter (p < 0.05). Conclusions: Under the limits of a vitro study, the shaping procedure with 2Shape and brushing motion was more efficient than the Hyflex CM in the midroot levels in terms of ΔMD, and in total canal space for ΔBL. Both files ensured an effective mechanical preparation.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Endodontics and Root Canal Treatments · Dental Radiography and Imaging · Dental materials and restorations
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Endodontic Department, Saint Joseph University of Beirut, Rue de Damas B.P. 17-5208, Beirut 1104 2020, Lebanon
Pedodontic Department, Saint Joseph University of Beirut, Rue de Damas B.P. 17-5208, Beirut 1104 2020, Lebanon
Department of General Surgery and Medical-Surgical Specialties, University of Catania, Via Santa Sofia 78, 95123 Catania, Italy
Discipline of Endodontology, Faculty of Dentistry, The University of Hong Kong, The Prince Philip Dental Hospital, 34 Hospital Road, Sai Ying Pun, Pok Fu Lam, Hong Kong, China
References (37)
Show source-provided references
1. Cutting efficiency of heat-treated nickel-titanium single-file systems at different incidence angles10.1111/aej.12462 ↗
2. Three-dimensional analysis of cutting behavior of nickel-titanium rotary instruments by microcomputed tomography10.1016/j.joen.2008.02.025 ↗
3. Viable bacteria in root dentinal tubules of teeth with apical periodontitis10.1097/00004770-200102000-00002 ↗
4. A primary observation on the preparation and obturation of oval canals10.1046/j.1365-2591.2001.00361.x ↗
5. Mechanical preparation of root canals: Shaping goals, techniques and means10.1111/j.1601-1546.2005.00152.x ↗
6. Preparation of oval-shaped root canals in mandibular molars using nickel-titanium rotary instruments: A micro-computed tomography study10.1016/j.joen.2009.12.020 ↗
7. Flat-oval root canal preparation with self-adjusting file instrument: A micro-computed tomography study10.1016/j.joen.2011.03.017 ↗
8. Nickel-titanium rotary file systems: What’s new?
9. Kaloustian, M.K., Nehme, W., El Hachem, C., Zogheib, C., Ghosn, N., Michetti, J., Naaman, A., and Diemer, F. (2019). Evaluation of two shaping systems and two ultrasonic irrigation devices in removing root canal filling material from mesial roots of mandibular molars: A micro ct study. Dent. J., 7.10.3390/dj7010002 ↗
10. Cyclic Fatigue Resistance of Nickel-titanium Rotary Instruments according to the Angle of File Access and Radius of Root Canal10.1016/j.joen.2019.11.015 ↗
11. Lateral and axial cutting efficiency of instruments manufactured with conventional nickel-titanium and novel gold metallurgy10.1111/iej.12822 ↗
12. Shaping ability of two root canal instrumentation systems in oval-shaped canals: A microcomputed tomography study10.1111/aej.12469 ↗
13. A comparison of canal preparations in straight and curved root canals10.1016/0030-4220(71)90230-1 ↗
14. The influence of brushing motion on the cutting behavior of 3 reciprocating files in oval-shaped canals10.1016/j.joen.2014.12.016 ↗
15. Assessment of root canal transportation of 2Shape and ProTaper gold in mandibular molar mesial canals: A micro–computed tomographic study10.1002/jemt.23633 ↗
16. Review and classification of heat treatment procedures and their impact on mechanical behavior of endodontic
17. An evaluation of canal morphology at different levels of root resection in mandibular incisors10.1016/S0099-2399(98)80120-9 ↗
18. Prevalence and extent of long oval canals in the apical third10.1067/moe.2000.106344 ↗
19. A new device to test cutting efficiency of mechanical endodontic instruments10.12659/MSM.890119 ↗
20. Cross-sectional analysis of root canals prepared with NiTi rotary instruments and stainless steel reciprocating files10.1016/j.tripleo.2005.12.022 ↗
21. Comparison of three techniques for preparing oval-shaped root canals10.1016/j.joen.2009.11.015 ↗
22. Deproteinization technique stabilizes the adhesion of the fiberglass post relined with resin composite to root canal10.1002/jbm.b.31946 ↗
23. Microtomography-based comparison of reciprocating single-file F2 ProTaper technique versus rotary full sequence10.1016/j.joen.2011.06.031 ↗
24. Changes in centring and shaping ability using three nickel–titanium instrumentation techniques analysed by micro-computed tomography (μCT)10.1111/j.1365-2591.2011.02004.x ↗
25. Publication trends in micro-CT endodontic research: A bibliometric analysis over a 25-year period10.1111/iej.13433 ↗
26. Comparison of uninstrumented areas of oval root canals with circumferential filing using different rotary files10.1088/1742-6596/1073/4/042004 ↗
27. Changes in diameter, cross-sectional area, and extent of canal-wall touching on using 3 instrumentation techniques in long-oval canals10.1016/j.tripleo.2011.05.007 ↗
28. Evaluation of radicular dentin thickness of danger zone in mandibular first molars
29. Evaluation of the impact of raw materials on the fatigue and mechanical properties of ProFile Vortex rotary instruments10.1016/j.joen.2011.11.004 ↗
30. Faisal, I., Saif, R., Alsulaiman, M., and Natto, Z.S. (2021). Shaping ability of 2Shape and NeoNiTi rotary instruments in preparation of curved canals using micro-computed tomography. BMC Oral Health, 21.10.1186/s12903-021-01961-x ↗
31. Cutting efficiency of conventional and martensitic nickel-titanium instruments for coronal flaring10.1016/j.joen.2013.08.016 ↗
32. Determining cutting efficiency of nickel-titanium coronal flaring instruments used in lateral action10.1111/iej.12177 ↗
33. New Technologies to Improve Root Canal Disinfection10.1590/0103-6440201600726 ↗
34. Effect of repeated simulated clinical use and sterilization on the cutting efficiency and flexibility of Hyflex CM nickel-titanium rotary files10.1016/j.joen.2015.01.011 ↗
35. Mechanical behavior of deep cryogenically treated martensitic shape memory nickel-titanium rotary endodontic instruments10.4103/1305-7456.178314 ↗
36. An in vitro Comparative Evaluation of Volume of Removed Dentin, Canal Transportation, and Centering Ratio of 2Shape, WaveOne Gold, and ProTaper Gold Files Using Cone-Beam Computed Tomography10.4103/jispcd.JISPCD_444_18 ↗
37. Shaping Ability of Two-shape and ProTaper Gold Files by using Cone-beam Computed Tomography10.5005/jp-journals-10024-2518 ↗