Analysis of Modular Design Applicable in Prosumer Scope. Guideline in the Creation of a New Modular Design Model
Source abstract
Abstract
Modular design is the design based on independent and connectable modules to achieve product variety. It is an ideal tool that could facilitate the inclusion of prosumers in the creative process. However, its evolution has focused on product development and not on end users. The creation of a new modular design model for prosumers could respond to their needs while exploiting the advantages of modularity. The present work analyzes the applicability of modular design in the prosumer scope and defines a guideline for the creation of the new model. To this end, prosumer and modular design methods are collected and analyzed throughout the previously defined design process. The intersection between both terms is analyzed through a series of real cases and design methods that show what the objectives of prosumers are and if the present products and methods meet their needs. These results will establish the current and potential link between modular design and prosumers. Finally, the objectives and stages to develop the design model based on previous results are presented. The paper presents relevant findings such as the lack of methods in the conceptual design phases and a guideline to ensure that the prosumer benefits from modular design.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Product Development and Customization · Design Education and Practice · Service and Product Innovation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Design and Manufacturing Engineering, Universidad de Zaragoza, 50018 Zaragoza, Spain
Funding
Funder Grant Number Conselleria de Innovación, Universidades, Ciencia y Sociedad Digital. Generalitat Valenciana. · INGEGRAF Association
References (54)
Show source-provided references
1. Toffler, A. (1980). The Third Wave, Wiley.
2. Prosumer and 3D printing: Democratization of the creative process
3. Cavas-Martínez, F., Sanz-Adan, F., Morer Camo, P., Lostado Lorza, R., and Santamaría Peña, J. (2020). Prosumer and Product Design Through Digital Tools. INGEGRAF 2019, LNME, Springer.
4. Lee, J.G., Seo, J.O., Abbas, A., and Choi, M. (2020). End-Users’ augmented reality utilization for architectural design review. Appl. Sci., 10.10.3390/app10155363 ↗
5. The Prosumer Movement: A New Challenge for Marketers
6. Co-creation and user innovation: The role of online 3D printing platforms10.1016/j.jengtecman.2015.07.002 ↗
7. Blättel-Mink, B., and Hellmann, K.U. (2010). Prosumer Revisited: Zur Aktualität Einer Debatte, VS Verlag für Sozialwissenschaften. [1st ed.].10.1007/978-3-531-91998-0 ↗
8. A systematic literature review on modular product design10.1080/09544828.2016.1166482 ↗
9. New product development for mass customization: A systematic review
10. A systematic literature review of modular product design (MPD) from the perspective of sustainability10.1007/s00170-015-8290-9 ↗
11. Vezzoli, C. (2018). Design for Environmental Sustainability: Life Cycle Design of Products, Springer.10.1007/978-1-4471-7364-9 ↗
12. Can the choice of eco-design principles affect products’ success?10.1017/dsj.2019.24 ↗
13. A methodology for module portfolio planning within the service solution layer of a product–service system10.1007/s00170-016-9976-3 ↗
14. Siiskonen, M., Malmqvist, J., and Folestad, S. (2021). Pharmaceutical Product Modularization as a Mass Customization Strategy to Increase Patient Benefit Cost-Efficiently. Systems, 9.10.3390/systems9030059 ↗
15. Faiña, A., Nejati, B., and Stoy, K. (2020). Evobot: An open-source, modular, liquid handling robot for scientific experiments. Appl. Sci., 10.10.3390/app10030814 ↗
16. User-experience Based Product Development for Mass Personalization: A Case Study10.1016/j.procir.2017.03.122 ↗
17. A multi-objective modular design method for creating highly distinct independent modules10.1007/s00163-016-0213-8 ↗
18. Reactive design methodology for product family platforms, modularity and parts integration10.1016/j.cirpj.2012.08.001 ↗
19. Eppinger, S.D., and Browning, T.R. (2012). Design Structure Matrix Methods and Applications, MIT Press.10.7551/mitpress/8896.001.0001 ↗
20. Product modularity: Measures and design methods10.1080/0954482032000101731 ↗
21. Roucoules, L., Paredes, M., Eynard, B., Morer Camo, P., and Rizzi, C. (2021). Review of Product Design and Manufacturing Methods for Prosumers. Advances on Mechanics, Design Engineering and Manufacturing III, Proceedings of the International Joint Conference on Mechanics, Design Engineering & Advanced Manufacturing, Aix-en-Provence, France, 2–4 June 2020, Springer.10.1007/978-3-030-70566-4 ↗
22. Cavas-Martínez, F., Eynard, B., Fernández Cañavate, F., Fernández-Pacheco, D., Morer, P., and Nigrelli, V. (2019). Modular Design: Product Design Opportunities and a Case Analysis. Advances on Mechanics, Design Engineering and Manufacturing II, LNME, Springer.10.1007/978-3-030-12346-8 ↗
23. Jones, J.C. (1970). Design Methods, John Wiley & Sons. [2nd ed.].
24. Product Life Cycle: The evolution of a paradigm and literature review from 1950–200910.1080/09537287.2011.577460 ↗
25. Asimow, M. (1962). Introduction to Design, Prentice-Hall.
26. The Evolution of Design10.2307/4444220 ↗
27. Zhou, P., Chen, S., and Chen, K. (2016, January 26–27). Design Process & Strategic Thinking in Architecture. Proceedings of the 2nd International Conference on Architecture, Structure and Civil Engineering, London, UK.
28. Erixon, G. (1998). Modular Function Deployment: A Method for Product Modularisation, Royal Institute of Technology.
29. Function analysis and decomposistion using function analysis systems technique
30. Product platform design: Method and application10.1007/s001630100002 ↗
31. Design for variety: Developing standardized and modularized product platform architectures10.1007/s00163-002-0020-2 ↗
32. A Methodology for Modular and Changeable Design Architecture and Application in Automotive Framing Systems10.1115/1.4031549 ↗
33. A product architecture-based conceptual DFA technique10.1016/j.destud.2003.09.001 ↗
34. Modularization to Support Multiple Brand Platforms
35. (2021, July 26). Modular Instruments in Yanko Design. Available online: https://www.yankodesign.com/2020/11/02/magnetic-modular-instruments-join-together-to-help-kids-produce-their-own-music/.
36. (2021, July 26). PhoneBlocks Homepage. Available online: https://phonebloks.com/.
37. Escribano-García, R., Corral-Bobadilla, M., Somovilla-Gómez, F., Lostado-Lorza, R., and Ahmed, A. (2021). A theoretical model with which to safely optimize the configuration of hydraulic suspension of modular trailers in special road transport. Appl. Sci., 11.10.3390/app11010305 ↗
38. Kumar, S., Wöhrle, H., Trampler, M., Simnofske, M., Peters, H., Mallwitz, M., Kirchner, E.A., and Kirchner, F. (2019). Modular design and decentralized control of the RECUPERA exoskeleton for stroke rehabilitation. Appl. Sci., 9.10.3390/app9040626 ↗
39. Ramírez-Rios, L.Y., Camargo-Wilson, C., Olguín-Tiznado, J.E., López-Barreras, J.A., Inzunza-González, E., and García-Alcaraz, J.L. (2021). Design of a modular plantar orthosis system through the application of TRIZ methodology tools. Appl. Sci., 11.10.3390/app11052051 ↗
40. (2021, July 26). Swidget Homepage. Available online: https://www.swidget.com/.
41. (2021, July 26). Freecube in Kickstarter. Available online: https://www.kickstarter.com/projects/1470062165/freecube-the-worlds-first-modular-tech-command-cen.
42. (2021, July 26). KI Ecobe in Kickstarter. Available online: https://www.kickstarter.com/projects/1121278858/ki-ecobe-customizable-self-assembled-footwear.
43. (2021, July 26). Bloqbag Homepage. Available online: https://www.bloqbag.com/.
44. (2021, July 26). Modular Robotics Homepage. Available online: https://www.modrobotics.com/.
45. (2021, July 26). Makeblock Neuron. Available online: https://www.makeblock.es/productos/neuron/.
46. (2021, July 26). Youmo Kickstarter. Available online: https://www.kickstarter.com/projects/1300499319/youmo-your-smart-modular-power-strip.
47. (2021, July 26). Fairphone Homepage. Available online: https://www.fairphone.com/es/.
48. Towards a framework for modular service design synthesis10.1007/s00163-016-0215-6 ↗
49. A method to optimize assemblability of industrial product in early design phase: From product architecture to assembly sequence10.1007/s12008-012-0147-y ↗
50. Personalized product configuration framework in an adaptable open architecture product platform10.1016/j.jmsy.2017.03.010 ↗
51. Adoption of Modular Design by Makers and Prosumers. A Survey10.1017/pds.2021.36 ↗
52. Definition of users’ requirements in the customized product design through a user-centered translation method10.1007/s12008-015-0275-2 ↗
53. (2021, July 26). IDEO Design Kit. Available online: https://www.designkit.org/.
54. (2021, July 26). Hasso Plattner Institute of Design at Stanford University D.School. Available online: https://dschool.stanford.edu/.