Structural and microstructural stability of ceria – gadolinia electrolyte exposed to reducing environments of high temperature fuel cells
Source abstract
Abstract
Doped CeO2 is widely used in intermediate temperature solid oxide fuel cells (500–650 °C) due to its high ionic conductivity, low reactivity to other cell components and ability to facilitate charge transfer reactions at the electrode/electrolyte interface. However, on exposure to hydrogen above 650 °C doped cerates can be reduced leading to catastrophic microstructure failure and loss of mechanical integrity. The effect of other fuels such as C and CO on the stability of ceria based electrolytes remains largely unexplored despite the increased significance in developing fuel cells that operate on these fuels. In this paper a systematic investigation has been carried out on the effect of carbon monoxide on the electrical conductivity, ionic transport, crystal structure and microstructure of Ce0.8Gd0.2O2−x, with particular emphasis on the mechanisms of reduction and the long term stability of the material for use in a direct carbon fuel cell (DCFC) where this material will be exposed to a reducing environment containing little or no hydrogen. These investigations have been carried out at temperatures typically found during the operation of a DCFC (800 °C) and the results have been compared with similar investigation carried out in dry hydrogen atmosphere. A wide range of techniques including synchrotron X-ray powder diffraction, high resolution transmission and scanning electron microscopy, four-probe DC conductivity measurements and electrochemical impedance analysis have been used to investigate the structural, microstructural and electrical properties of Ce0.8Gd0.2O2−x exposed to the operating environments of a DCFC.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. Steele · Solid State Ionics · 2000 · 129 · 9510.1016/S0167-2738(99)00319-7 ↗
2. Kharton · Solid State Ionics · 2004 · 174 · 13510.1016/j.ssi.2004.06.015 ↗
3. Badwal · Ionics · 2000 · 6 · 110.1007/BF02375543 ↗
4. Yokokawa · Solid State Ionics · 2004 · 174 · 20510.1016/j.ssi.2004.05.030 ↗
5. Badwal · Solid State Ionics · 1999 · 121 · 25310.1016/S0167-2738(99)00044-2 ↗
6. Krishnamurthy · Acta Mater. · 2004 · 52 · 180710.1016/j.actamat.2003.12.020 ↗
7. Mogensen · J. Electrochem. Soc. · 1994 · 141 · 212210.1149/1.2055072 ↗
8. Zhang · J. Power Sources · 2008 · 175 · 80010.1016/j.jpowsour.2007.10.021 ↗
9. Eguchi · Solid State Ionics · 1992 · 52 · 16510.1016/0167-2738(92)90102-U ↗
10. Leah · ECS Trans. · 2011 · 35 · 35110.1149/1.3570010 ↗
11. Bidrawn · Electrochem. Solid-State Lett. · 2008 · 11 · B16710.1149/1.2943664 ↗
12. Jensen · Int. J. Hydrogen Energy · 2007 · 32 · 325310.1016/j.ijhydene.2007.04.042 ↗
13. Giddey · Prog. Energy Combust. Sci. · 2012 · 38 · 36010.1016/j.pecs.2012.01.003 ↗
14. Badwal · WIRES Energy Environ. · 201210.1002/wene.50 ↗
15. Kulkarni · Solid State Ionics · 2011 · 194 · 4610.1016/j.ssi.2011.05.009 ↗
16. Wallwork · AIP Conf. Proc. · 2007 · 879 · 87910.1063/1.2436201 ↗
17. Schmitt · Nucl. Instrum. Methods Phys. Res., Sect. A · 2003 · 501 · 26710.1016/S0168-9002(02)02045-4 ↗
18. Maher · J. Phys. Chem. A · 2008 · 112 · 149710.1021/jp076361j ↗
19. Perrichon · J. Chem. Soc., Faraday Trans. · 1994 · 90 · 77310.1039/FT9949000773 ↗
20. Guo · ChemPhysChem · 2010 · 11 · 169310.1002/cphc.201000008 ↗
21. Li · Phys. Rev. B: Condens. Matter Mater. Phys. · 2011 · 84 · 18020110.1103/PhysRevB.84.180201 ↗