journal article·2019-09-01

Experiments on Continuous Unbonded Post-Tensioned Beams with 2400 MPa (350 ksi) Strands

Authors not provided

ACI Structural Journal· Volume 116· Issue 5
Publisher page

Abstract

First Name is required invalid characters Last Name is required invalid characters Email Address is required Invalid Email Address Invalid Email Address
Only a short abstract or summary was supplied by the source.
Source: openalex_inverted_index · Quality: short

Research context

OpenAlex topics: Structural Behavior of Reinforced Concrete · Concrete Corrosion and Durability · Structural Load-Bearing Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. AASHTO, 2017, “AASHTO LRFD Bridge Design Specifications,” eighth edition, American Association of State Highway Transportation Officials, Washington, DC.
2. Abo Alarab, L. A.; Poursaee, A.; and Ross, B. E., 2019, “An Experimental Method for Evaluating Reinforcement Corrosion in Cracked Concrete,” Journal of Structural Integrity and Maintenance, V. 4, No. 1, pp. 43-50. doi: 10.1080/24705314.2019.156505810.1080/24705314.2019.1565058 ↗
3. ACI Committee 318, 2014, “Building Code Requirements for Structural Concrete (ACI 318-14) and Commentary,” American Concrete Institute, Farmington Hills, MI, 520 pp.
4. ACI Committee 423, 2016, “Guide to Estimating Prestress Loss (ACI 423.10R-16),” American Concrete Institute, Farmington Hills, MI, 64 pp.
5. Au, F. T. K., and Du, J. S., 2004, “Prediction of Ultimate Stress in Unbonded Prestressed Tendons,” Magazine of Concrete Research, V. 56, No. 1, pp. 1-11. doi: 10.1680/macr.2004.56.1.110.1680/macr.56.1.1.36288 ↗
6. Burns, N. H.; Charney, F. A.; and Vines, W. R., 1978, “Tests of One-Way Post-Tensioned Slabs with Unbonded Tendons,” PCI Journal, V. 23, No. 5, pp. 66-83. doi: 10.15554/pcij.09011978.66.8310.15554/pcij.09011978.66.83 ↗
7. Burns, N. H.; Helwig, T.; and Tsujimoto, T., 1991, “Effective Prestress Force in Continuous Post-Tensioned Beams with Unbonded Tendons,” ACI Structural Journal, V. 88, No. 1, Jan.-Feb., pp. 84-90.10.14359/2780 ↗
8. Harajli, M.; Mabsout, M. E.; and Al-Hajj, J. A., 2002, “Response of Externally Post-tensioned Continuous Member,” ACI Structural Journal, V. 99, No. 5, Sept.-Oct., pp. 671-680.10.14359/12307 ↗
9. Harajli, M. H., 2006, “On the Stress in Unbonded Tendons at Ultimate: Critical Assessment and Proposed Changes,” ACI Structural Journal, V. 103, No. 6, Nov.-Dec., pp. 803-812.10.14359/18231 ↗
10. Harajli, M. H., 2012, “Tendon Stress at Ultimate in Continuous Unbonded Post-Tensioned Members: Proposed Modification of ACI 318, Eq. (18-4) and (18-5),” ACI Structural Journal, V. 100, No. 2, Mar.-Apr., pp. 183-192.
11. Harajli, M. H., and Hijazi, S. A., 1991, “Evaluation of the Ultimate Steel Stress in Partially Prestressed Concrete Members,” PCI Journal, V. 36, No. 1, pp. 62-82. doi: 10.15554/pcij.01011991.62.8210.15554/pcij.01011991.62.82 ↗
12. KCI, 2012, “Concrete Structure’s Code (KCI-12),” Korea Concrete Institute, Seoul, Korea. (in Korean)
13. Kim, K., and Kang, T. H.-K., 2018, “Monitoring Secondary Moment of Continuous Unbonded Post-Tensioned Concrete Beams,” PTI Journal, V. 14, No. 2, Dec., pp. 5-16.
14. Kim, J.; Seong, T.; and Lee, J., 2012, “Development of 2,160 MPa/2,400 MPa PS Strand and Its Application Technology,” Magazine of the Korea Concrete Institute, V. 24, No. 3, pp. 45-50. (in Korean)
15. Kim, J. K.; Kim, J.; and Kwon, S. H., 2014, “Mechanical Properties of a New Prestressing Strand with Ultimate Strength of 2160 MPa,” KSCE Journal of Civil Engineering, V. 18, No. 2, pp. 607-615. doi: 10.1007/s12205-014-0065-610.1007/s12205-014-0065-6 ↗
16. Kim, J. K.; Seong, T. R.; Jang, K. P.; and Kwon, S. H., 2013, “Tensile Behavior of New 2,200 MPa and 2,400 MPa Strands according to Various Types of Mono Anchorage,” Structural Engineering and Mechanics, V. 47, No. 3, pp. 383-399. doi: 10.12989/sem.2013.47.3.38310.12989/sem.2013.47.3.383 ↗
17. Kim, J. K.; Yang, J. M.; and Yim, H. J., 2016, “Experimental Evaluation of Transfer Length in Pretensioned Concrete Beams Using 2,400-MPa Prestressed Strands,” Journal of Structural Engineering, ASCE, V. 142, No. 11, p. 04016088 doi: 10.1061/(ASCE)ST.1943-541X.000156710.1061/(ASCE)ST.1943-541X.0001567 ↗
18. Kordina, K., and Hegger, J., 1987, “Determination of the Ultimate Strength in Bending in the Case of Prestressing without Bond,” Beton- und Stahlbetonbau, V. 84, No. 4, pp. 85-90. (in German) doi: 10.1002/best.19870015010.1002/best.198700150 ↗
19. KS D 7002, 2011, “Uncoated Stress-Relieved Steel Wires and Strands for Prestressed Concrete,” Korea Agency for Technology and Standards, Seoul, Korea.
20. Lee, S.-H.; Shin, K.-J.; and Kang, T. H.-K., 2015, “Flexural Strengthening of Continuous Concrete Beams Using Externally Prestressed Steel Bars,” PCI Journal, V. 60, No. 1, pp. 68-86.10.15554/pcij60.1-01 ↗
21. Maguire, M.; Collins, W. N.; Halbe, K. R.; and Roberts-Wollmann, C. L., 2016, “Multi-Span Members with Unbonded Tendons: Ultimate Strength Behavior,” ACI Structural Journal, V. 113, No. 2, Mar.-Apr., pp. 195-204.10.14359/51688192 ↗
22. Naaman, A. E.; Burns, N.; French, C.; Gamble, W. L.; and Mattock, A. H., 2002, “Stresses in Unbonded Prestressing Tendons at Ultimate: Recommendation,” ACI Structural Journal, V. 99, No. 4, July-Aug., pp. 518-529.10.14359/12121 ↗
23. Pannell, F. N., 1969, “The Ultimate Moment of Resistance of Unbonded Prestressed Concrete Beams,” Magazine of Concrete Research, V. 21, No. 66, pp. 43-54. doi: 10.1680/macr.1969.21.66.4310.1680/macr.1969.21.66.43 ↗
24. Park, H., and Cho, J.-Y., 2017, “Ductility Analysis of Prestressed Concrete Members with High-Strength Strands and Code Implications,” ACI Structural Journal, V. 114, No. 2, Mar.-Apr., pp. 407-416. doi: 10.14359/5168943510.14359/51689435 ↗
25. PTI, 2000, “PTI M50.2-00: Anchorage Zone Design,” Post-Tensioning Institute, Farmington Hills, MI.
26. Song, L.; Fan, Z.; and Hou, J., 2019, “Experimental and Analytical Investigation of the Fatigue Flexural Behavior of Corroded Reinforced Concrete Beams,” International Journal of Concrete Structures and Materials, V. 13.10.1186/s40069-019-0340-5 ↗
27. Tam, A., and Pannell, F. N., 1976, “Ultimate Moment of Resistance of Unbonded Partially Prestressed Reinforced Concrete Beams,” Magazine of Concrete Research, V. 28, No. 97, pp. 203-208. doi: 10.1680/macr.1976.28.97.20310.1680/macr.1976.28.97.203 ↗
28. Yang, J. M.; Kim, J.; and Yoo, D., 2018, “Transfer Length in Full-Scale Pretensioned Concrete Beams with 1.4 m and 2.4 m Section Depths,” Engineering Structures, V. 171, pp. 433-444. doi: 10.1016/j.engstruct.2018.05.10410.1016/j.engstruct.2018.05.104 ↗
29. Yang, K.-H., and Kang, T. H.-K., 2011, “Equivalent Strain Distribution Factor for Unbonded Tendon Stress at Ultimate,” ACI Structural Journal, V. 108, No. 2, Mar.-Apr., pp. 217-226.10.14359/51664257 ↗