journal article·2015

Injection-molded hydroxyapatite/polyethylene bone-analogue biocomposites via structure manipulation

Ze-Pu Wang, Yan-Fei Huang, Jia-Zhuang Xu, Ben Niu, Xiao-Liang Zhang, Gan-Ji Zhong, Ling Xu, Zhong-Ming Li

Journal of Materials Chemistry B· Volume 3· Issue 38
Publisher page

Abstract

Due to insufficient mechanical performance, such as low tensile strength, the application of hydroxyapatite (HA)/high-density polyethylene (HDPE) biocomposites has been limited to use as minor load-bearing bone substitutes. In the current work, we propose to impose an intense shear flow during injection molding to tune the microstructure of the HA/HDPE biocomposites, by which an anisotropic biomimetic structure and superior mechanical properties were gained. Morphological observations manifested that the imposed intense shear induced a large amount of oriented self-reinforced superstructure, i.e., interlocked shish-kebabs, which brought not only structure similarity with the natural bone but also considerable mechanical reinforcement. For the 20 wt% HA/HDPE biocomposite, the tensile strength and bending strength of the structured sample rose from 22.4 and 20.2 MPa for the normal sample to 60.4 and 44.0 MPa, increasing by 169% and 118%, respectively, which already reaches the bounds of human cortical bone. The Young's modulus increased to 1462.0 MPa, with an augment of 37%. The impact toughness of the structured biocomposite (64.6 kJ m-2) showed as over 5 times larger than the normal biocomposite (10.1 kJ m-2). Besides, the dispersion of the HA in the biocomposites especially at the high filler content was enhanced, playing a positive role in sustaining the bioactivity. All these results indicate that the structured HA/HDPE biocomposites hold great promise for use in high load-bearing orthopedic applications.
Source: europepmc · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Bone Tissue Engineering Materials · Orthopaedic implants and arthroplasty · Additive Manufacturing and 3D Printing Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

College of Polymer Science and Engineering

State Key Laboratory of Polymer Materials Engineering

Sichuan University

Chengdu

People's Republic of China

Funding

National Natural Science Foundation of China

References (35)

Show source-provided references
1. Seal · Mater. Sci. Eng., R · 2001 · 34 · 14710.1016/S0927-796X(01)00035-3 ↗
2. Vander Sloten · Biomaterials · 1998 · 19 · 145510.1016/S0142-9612(98)00058-1 ↗
3. Bonfield · Biomaterials · 1981 · 2 · 18510.1016/0142-9612(81)90050-8 ↗
4. Vallet-Regi · J. Chem. Soc., Dalton Trans. · 2001 · 9710.1039/b007852m ↗
5. Downes · Bioceramics · 1991 · 4 · 46
6. Dornhoffer · Laryngoscope · 1998 · 108 · 53110.1097/00005537-199804000-00013 ↗
7. Tucker · Compos. Sci. Technol. · 1999 · 59 · 65510.1016/S0266-3538(98)00120-1 ↗
8. Joseph · Biomacromolecules · 2005 · 6 · 102110.1021/bm0493180 ↗
9. Wang · Biomaterials · 1998 · 19 · 235710.1016/S0142-9612(98)00154-9 ↗
10. Wang · Br. Ceram. Trans. · 1994 · 93 · 91
11. A. Carmen , P.Rosestela, K.Arquimedes, G.Gema, D.Nohemy, S.Yanixia and B. J.Luis, Times of Polymers and Composites. Selected Contributions from the 3rd International Conference on “Times of Polymers and Composites (TOP)” (Macromolecular Symposia Vol. 247), Ischia, 2007
12. Wang · Mater. Lett. · 2000 · 44 · 11910.1016/S0167-577X(00)00026-4 ↗
13. Wang · Biomaterials · 2001 · 22 · 131110.1016/S0142-9612(00)00283-0 ↗
14. Sadi · J. Mater. Sci.: Mater. Med. · 2004 · 15 · 853
15. Nath · J. Biomed. Mater. Res., Part B · 2009 · 88B · 110.1002/jbm.b.31050 ↗
16. Tripathi · J. Appl. Polym. Sci. · 2012 · 124 · 305110.1002/app.35339 ↗
17. Tripathi · J. Biomed. Mater. Res., Part A · 2013 · 101 · 153910.1002/jbm.a.34452 ↗
18. H. Takadama , M.Hashimoto, Y.Takigawa, M.Mizuno and T.Kokubo, 16th International Symposium on Ceramics in Medicine, Porto, 2004
19. Hashimoto · Mater. Res. Bull. · 2006 · 41 · 51510.1016/j.materresbull.2005.09.014 ↗
20. Wang · Biomaterials · 2003 · 24 · 213310.1016/S0142-9612(03)00037-1 ↗
21. Brydone · Proc. Inst. Mech. Eng., Part H · 2010 · 224 · 132910.1243/09544119JEIM770 ↗
22. Ladizesky · Polym. Adv. Technol. · 1997 · 8 · 49610.1002/(SICI)1099-1581(199708)8:8<496::AID-PAT676>3.0.CO;2-R ↗
23. Huang · Biomaterials · 2014 · 35 · 668710.1016/j.biomaterials.2014.04.077 ↗
24. Huang · J. Mater. Chem. B · 2014 · 2 · 97110.1039/c3tb21231a ↗
25. Yang · Macromolecules · 2012 · 45 · 660010.1021/ma300974w ↗
26. Picken · Macromolecules · 1990 · 23 · 384910.1021/ma00218a021 ↗
27. Xu · ACS Appl. Mater. Interfaces · 2012 · 4 · 152110.1021/am201752d ↗
28. Wu · Int. J. Nanomed. · 2012 · 7 · 1215
29. K. Pielichowska and S.Blazewicz, in Adv. Polym. Sci., ed. A. Abe, K. Dusek and S. Kobayashi, Springer, Berlin, Heidelberg, 2010, vol. 232, pp. 97–207
30. Fratzl · Prog. Mater. Sci. · 2007 · 52 · 126310.1016/j.pmatsci.2007.06.001 ↗
31. Keller · Colloid Polym. Sci. · 1985 · 263 · 18110.1007/BF01415506 ↗
32. Hobbs · Macromolecules · 2001 · 34 · 35310.1021/ma001697b ↗
33. Kimata · Science · 2007 · 316 · 101410.1126/science.1140132 ↗
34. Juhasz · Bioceramics · 2003 · 240–242 · 947
35. Homaeigohar · J. Eur. Ceram. Soc. · 2006 · 26 · 27310.1016/j.jeurceramsoc.2004.10.003 ↗