Analysis of the morphology, structure and optical properties of 1D SiO2 nanostructures obtained with sol-gel and electrospinning methods
Source abstract
Abstract
Abstract The aim of the study was the production of ceramic SiO2 nanowires using the sol-gel and electrospinning methods from a PVP/TEOS/AcOH/EtOH solution. The obtained fibrous mats underwent preliminary drying at room temperature. Then, they were subjected to the calcination process in air to obtain pure amorphous silicon dioxide nanowires. A scanning electron microscope (SEM) with an energy dispersive spectrometer (EDS) was used in order to carry out an analysis of the morphology and chemical composition of the resulting nanowires. A high-resolution transmission electron microscope (TEM) was used along with X-ray diffraction analysis (XRD) in order to analyse the structure of the obtained materials. Besides, thermogravimetric analysis (TGA) was performed to show polymer concentration loss in the function of temperature in the obtained two types of PVP/SiO2 nanofibers. The analysis of the optical properties and the energy band gap of the prepared nanowires was determined by spectral analysis using a UV–Vis spectrophotometer. Using the method proposed by the authors and the recorded absorbance spectra determined the banded refractive index n, real n′ and imaginary k part of the refractive index as a function of the wavelength, complex dielectric constant e, real and imaginary part er and ei of the dielectric constant as a function of the wavelength of the SiO2 nanowires. The obtained results, which were as follows: energy band gap of 3.93–3.97 eV, complex refractive index coefficient values of 1.52–1.65 and dielectric constant in the range of 2.30–2.73, suggest the possibility to control the morphology and optical properties of the produced nanomaterial.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Conducting polymers and applications · TiO2 Photocatalysis and Solar Cells · Electrospun Nanofibers in Biomedical Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. A novel method for making silica nanofibres by using electrospun fibres of polyvinylalcohol/silica composite as precursor10.1088/0957-4484/13/5/319 ↗
2. Fabrication of refining mesoporous silica nanofibers via electrospinning10.1016/j.matlet.2007.04.096 ↗
3. The fabrication of photosensitive self-assembly Au nanoparticles embedded in silica nanofibers by electrospinning10.1016/j.jcis.2009.09.011 ↗
4. Electrospun nanofibers of NiO/SiO2 composite10.1016/j.jpcs.2009.08.005 ↗
5. Hierarchical electrospun SiO2 nanofibers containing SiO2 nanoparticles with controllable surface-roughness and/or porosity10.1016/j.matlet.2010.04.008 ↗
6. Silica nanofibers-based impedance type humidity detector prepared on glass substrate10.1016/j.vacuum.2012.06.016 ↗
7. Tuning porous silica nanofibers by colloid electrospinning for dye adsorption10.1016/j.apsusc.2014.06.002 ↗
8. Fabrication and characterization of electrospun SiO2 nanofibers absorbed with fatty acid eutectics for thermal energy storage/retrieval10.1016/j.solmat.2014.08.030 ↗
9. Synthesis of electrospun silica nanofibers for protein/DNA binding10.1016/j.matlet.2016.07.148 ↗
10. Self-standing conductive ITO-silica nanofiber mats for use in flexible electronics and their application in dye-sensitized solar cells10.1016/j.ceramint.2017.03.140 ↗
11. Manufacturing and investigation of surface morphology and optical properties of composite thin films reinforced by TiO2, Bi2O3 and SiO2 nanoparticles10.1016/j.apsusc.2017.03.232 ↗
12. Novel bimodal ZnO (amorphous)/ZnO NPs (crystalline) electrospun 1D nanostructure and their optical characteristic
13. Manufacturing process, characterization and optical investigation of amorphous 1D zinc oxide nanostructures10.1016/j.apsusc.2018.01.041 ↗
14. Synthesis of the novel type of bimodal ceramic nanowires from polymer and composite fibrous mats10.3390/nano8030179 ↗
15. Manufacturing and investigation of physical properties of polyacrylonitrile nanofibre composites with SiO2, TiO2 and Bi2O3 nanoparticles10.3762/bjnano.7.106 ↗
16. Synthesis and characterization of SiO2 nanoparticles by sol-gel process and its degradation of methylene blue10.9734/ACSJ/2015/10875 ↗
17. Electrospinning synthesis and photoluminescence properties of one-dimensional SiO2: Tb3+ nanofibers and nanobelts10.4236/anp.2017.62004 ↗
18. Fibrous silica-hydroxyapatite composite by electrospinning
19. Fabrication of hollow and nonhollow SiO2 nanofibers for removal of cationic dyes from aqueous solutions10.1002/ep.12584 ↗
20. Fabrication and characterization of electrospun SiO2 nanofibers absorbed with fatty acid eutectics for thermal energy storage/retrieval10.1016/j.solmat.2014.08.030 ↗
21. The band edge of amorphous SiO2 by photoinjection and photoconductivity measurements10.1016/0038-1098(71)90643-0 ↗
22. Transmission, photoconductivity, and the experimental band gap of thermally grown Si O 2 films10.1103/PhysRevB.19.3107 ↗
23. Hierarchical electrospun SiO 2 nanofibers containing SiO 2 nanoparticles with controllable surface-roughness and/or porosity10.1016/j.matlet.2010.04.008 ↗
24. Exploitation of multiple incidences spectrometric measurements for thin film reverse engineering10.1364/OE.20.015734 ↗