journal article·2014-10

Microstructure and elevated temperature wear behavior of induction melted Fe-based composite coating

Ge Hu, Huimin Meng, Junyou Liu

Publisher page

Abstract

Abstract Fe-based composite coating prepared onto the component of guide wheel using ultrasonic frequency inductive cladding (UFIC) technique has been investigated in terms of microstructure, phase constitutions, microhardness and elevated temperature wear behavior by scanning electron microscopy (SEM), energy-dispersive spectrometer (EDS), X-ray diffraction (XRD), Vickers microhardness tester and ball-on-disc wear tester. The results indicated that the primary phase in the coating contained austenite γ-Fe, eutectic γ-Fe/(Cr,Fe)2B, boride (Cr,Fe)2B and precipitation enriched in Mo. The average microhardness of the coating was 760 ± 10 HV0.2, which was three times higher than that of the substrate. With increasing temperature, the friction coefficients of the coating and high-chromium cast iron decreased gradually while the wear rates increased during dry sliding wear condition. The relative wear resistance of the coating was 1.63 times higher than that of the high-chromium cast iron at 500 °C, which was ascribed to the hard borides with high thermal stability uniformly embedded in the coating and the formation of dense transfer layer formed onto the worn surface. The high temperature wear mechanism of the coating was dominated by mild abrasive wear. The study revealed that Fe-based composite coating had excellent high temperature wear resistance under dry sliding wear condition.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal Alloys Wear and Properties · High Entropy Alloys Studies · Surface Treatment and Coatings

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. Wear and oxidation behaviour of high-chromium white cast irons10.1016/j.matchar.2007.05.021 ↗
2. Corrosion and nanomechanical properties of vanadium carbide thin film coatings of tool steel10.1016/j.surfcoat.2011.11.042 ↗
3. Review of oxidational wear. Part I10.1016/0301-679X(83)90086-5 ↗
4. Review of oxidational wear, Part II10.1016/0301-679X(83)90039-7 ↗
5. High temperature sliding wear behaviour of Inconel 617 and Stellite 6 alloys10.1016/j.wear.2010.07.005 ↗
6. Tribological properties of laser surface texturing and molybdenizing duplex-treated Ni-base alloy10.1016/j.triboint.2008.12.004 ↗
7. Mechanical and tribological properties of Ni-based alloy/CeF3/graphite high temperature self-lubricating composites10.1016/S0043-1648(01)00846-8 ↗
8. Development and characterization of composite Ni–Cr–C–CaF2 laser cladding on (-TiAl intermetallic alloy10.1016/j.jallcom.2008.03.020 ↗
9. Microstructure and tribological properties of laser clad CaF2/Al2O3 self-lubrication wear-resistant ceramic matrix composite coatings10.1016/S1359-6462(02)00086-6 ↗
10. Lubrication behavior of Ni-Cr-based alloys containing MoS2 at high temperature10.1016/S0043-1648(01)00803-1 ↗
11. Microstructure and wear behaviors of laser clad NiCr/Cr3C2–WS2 high temperature self-lubricating wear-resistant composite coating10.1016/j.apsusc.2011.12.021 ↗
12. Understanding the solidification and microstructure evolution during CSC–MIG welding of Fe–Cr–B–based alloy10.1016/j.matchar.2013.09.017 ↗
13. Some peculiarities of the structure of high boron steels10.1007/BF00777432 ↗
14. Microstructure and corrosion resistance of induction melted Fe-based alloy coating10.1016/j.surfcoat.2014.04.045 ↗
15. Friction and sliding wear behavior of induction melted FeCrB metamorphic alloy coating10.1016/j.apsusc.2014.04.173 ↗
16. Microstructural and microhardness characteristics of induction melted nickel-based alloys10.1016/j.matchemphys.2009.12.020 ↗
17. Microstructure and bonding behavior on the interface of an induction-melted Ni-based alloy coating and AISI 4140 steel substrate10.1016/j.surfcoat.2010.03.002 ↗
18. 1979 · 341
19. Effect of high temperature and sub-ambient treatments on the matrix structure and abrasion resistance of a high-chromium white iron10.1016/S1359-6462(98)00118-3 ↗
20. Tribological characterisation of Zr-based bulk metallic glass in simulated physiological media10.1080/14786435.2011.589867 ↗
21. Effects of Cr and B contents on volume fraction of (Cr,Fe)2B and hardness in Fe-based alloys used for powder injection molding10.1007/s11661-012-1086-8 ↗
22. The interfacial and tribological properties of Ni–Cr alloy/ceramic tribo-couples under dry sliding contact10.1016/j.jeurceramsoc.2005.04.019 ↗
23. Microstructure and high temperature wear resistance of laser cladding NiCoCrAlY/ZrB2 coating10.1016/S1875-5372(13)60087-9 ↗
24. Friction and wear behavior of laser cladding Ni/hBN self-lubricating composite coating10.1016/j.msea.2007.12.015 ↗
25. Microstructure and Tribology of Spark Plasma Sintered Fe–Cr–B Metamorphic Alloy Powder10.1007/s11249-011-9845-z ↗
26. Studies of Fe–40Al coatings obtained by high velocity oxy-fuel10.1016/j.surfcoat.2006.04.045 ↗
27. The microstructure and high temperature wear performance of a nickel base hardfaced coating10.1016/j.surfcoat.2010.05.022 ↗
28. Microstructural properties of wear-resistant alloys