journal article·2025-08-19

Parametric design and additively manufactured hybrid gradient porous scaffolds: mechanical properties, shape memory and permeability

Yong Xu, Zonghan Li, Shuangjun Zhang, Peng Chen, Pin Li, Mengqi Li, Meigui Chen

Publisher page

Abstract

No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.

Source: Not provided · Quality: missing

Research context

OpenAlex topics: Innovations in Concrete and Construction Materials · Cellular and Composite Structures · Polymer composites and self-healing

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (53)

Show source-provided references
1. Li Y, Li J, Jiang S, Zhong C, Zhao C, Jiao Y, Shen J, Chen H, Ye M, Zhou J, Yang X, Gou Z, Xu S, Shen M. The design of strut/TPMS-based pore geometries in bioceramic scaffolds guiding osteogenesis and angiogenesis in bone regeneration. Mater Today Bio. 2023;20: 100667.
2. Zhang Q, Ma L, Ji X, He Y, Cui Y, Liu X, Xuan C, Wang Z, Yang W, Chai M. High-strength hydroxyapatite scaffolds with minimal surface macrostructures for load-bearing bone regeneration. Adv Funct Mater. 2022;32:2204182.10.1002/adfm.202204182 ↗
3. Martinez-Marquez D, Mirnajafizadeh A, Carty CP, Stewart RA. Application of quality by design for 3D printed bone prostheses and scaffolds. PLoS ONE. 2018;13: e0195291.
4. Guo X, Ding J, Li X, Qu S, Hsi Fuh JY, Lu WF, Song X, Zhai W. Interpenetrating phase composites with 3D printed triply periodic minimal surface (TPMS) lattice structures. Compos Part B Eng. 2023;248: 110351.
5. Zhang J, Chen X, Sun Y, Yang J, Chen R, Xiong Y, Hou W, Bai L. Design of a biomimetic graded TPMS scaffold with quantitatively adjustable pore size. Mater Des. 2022;218: 110665.
6. Ma S, Tang Q, Han X, Feng Q, Song J, Setchi R, Liu Y, Liu Y, Goulas A, Engstrøm DS, Tse YY, Zhen N. Manufacturability, mechanical properties, mass-transport properties and biocompatibility of triply periodic minimal surface (TPMS) porous scaffolds fabricated by selective laser melting. Mater Des. 2020;195: 109034.
7. Yang Y, Wang G, Liang H, Gao C, Peng S, Shen L, Shuai C. Additive manufacturing of bone scaffolds. Int J Bioprint. 2019;5:148.10.18063/ijb.v5i1.148 ↗
8. Guo X, Ding J, Li X, Qu S, Song X, Fuh JYH, Lu WF, Zhai W. Enhancement in the mechanical behaviour of a Schwarz Primitive periodic minimal surface lattice structure design. Int J Mech Sci. 2022;216: 106977.
9. Jia H, Lei H, Wang P, Meng J, Li C, Zhou H, Zhang X, Fang D. An experimental and numerical investigation of compressive response of designed Schwarz Primitive triply periodic minimal surface with non-uniform shell thickness. Extrem Mech Lett. 2020;37: 100671.
10. Zhen C, Shi Y, Wang W, Zhou G, Li H, Lin G, Wang F, Tang B, Li X. Advancements in gradient bone scaffolds: enhancing bone regeneration in the treatment of various bone disorders. Biofabrication. 2024;16: 032004.10.1088/1758-5090/ad4595 ↗
11. Kadir Hussein NA, Noordin MA, Md Saad AP. Influence of conical graded porous architecture on the mechanical, failure behavior and fluid-flow properties for bone scaffold application. Eng Fail Anal. 2024;157:107893.10.1016/j.engfailanal.2023.107893 ↗
12. Jiang W, Liao W, Liu T, Shi X, Wang C, Qi J, Chen Y, Wang Z, Zhang C. A voxel-based method of multiscale mechanical property optimization for the design of graded TPMS structures. Mater Des. 2021;204: 109655.
13. Yang L, Mertens R, Ferrucci M, Yan C, Shi Y, Yang S. Continuous graded Gyroid cellular structures fabricated by selective laser melting: Design, manufacturing and mechanical properties. Mater Des. 2019;162:394–404.10.1016/j.matdes.2018.12.007 ↗
14. Liu Y, Li A, Du B, He X. Design and properties research of radial gradient controllable biomimetic bone scaffold based on tree-liked fractal structure. Chem Eng J. 2024;499: 156168.
15. Li L, Wang P, Liang H, Jin J, Zhang Y, Shi J, Zhang Y, He S, Mao H, Xue B. Design of a haversian system-like gradient porous scaffold based on triply periodic minimal surfaces for promoting bone regeneration. J Adv Res. 2023;54:89–104.10.1016/j.jare.2023.01.004 ↗
16. Wu Y, Fang J, Wu C, Li C, Sun G, Li Q. Additively manufactured materials and structures: a state-of-the-art review on their mechanical characteristics and energy absorption. Int J Mech Sci. 2023;246: 108102.
17. Guo W, Yang Y, Liu C, Bu W, Guo F, Li J, Wang E, Peng Z, Mai H, You H. 3D printed TPMS structural PLA/GO scaffold: process parameter optimization, porous structure, mechanical and biological properties. J Mech Behav Biomed Mater. 2023;142: 105848.
18. Wang Y, Chen S, Liang H, Bai J, Wang M. Design and fabrication of biomimicking radially graded scaffolds via digital light processing 3D printing for bone regeneration. J Mater Chem B. 2023;11:9961–74.10.1039/D3TB01573D ↗
19. Li D, Chen P, Du H, Li Z, Li M, Xu Y. 3D-printed shape memory and piezoelectric bifunctional thermoplastic polyurethane/polyvinylidene fluoride porous composite scaffold for bone regeneration. ACS Biomater Sci Eng. 2024;10:7100–10.10.1021/acsbiomaterials.4c01221 ↗
20. Shuai C, Wang Z, Yang F, Zhang H, Liu J, Feng P. Laser additive manufacturing of shape memory biopolymer bone scaffold: 3D conductive network construction and electrically driven mechanism. J Adv Res. 2023;65:167–81.10.1016/j.jare.2023.11.031 ↗
21. Gnatowski P, Gwizdała K, Kurdyn A, Skorek A, Augustin E, Kucińska-Lipka J. Investigation on filaments for 3D printing of nasal septum cartilage implant. Materials. 2023;16:3534.10.3390/ma16093534 ↗
22. Jiang Y, Shi K, Zhou L, He M, Zhu C, Wang J, Li J, Li Y, Liu L, Sun D. 3D-printed auxetic-structured intervertebral disc implant for potential treatment of lumbar herniated disc. Bioact Mater. 2023;20:528–38.
23. Xu Y, Zhang S, Ding W, Du H, Li M, Li Z, Chen M. Additively-manufactured gradient porous bio-scaffolds: Permeability, cytocompatibility and mechanical properties. Compos Struct. 2024;336: 118021.
24. Zhu J, Zou S, Mu Y, Wang J, Jin Y. Additively manufactured scaffolds with optimized thickness based on triply periodic minimal surface. Materials. 2022;15:7084.10.3390/ma15207084 ↗
25. Zhao Z, Li J, Wei Y, Yu T. Design and properties of graded polyamide12/hydroxyapatite scaffolds based on primitive lattices using selective laser sintering. J Mech Behav Biomed Mater. 2022;126: 105052.
26. Wang S, Shi Za, Liu L, Zhou X, Zhu L, Hao Y. The design of Ti6Al4V primitive surface structure with symmetrical gradient of pore size in biomimetic bone scaffold. Mater Des. 2020;193: 108830.
27. Milovanović J, Stojković M, Trifunović M, Vitković N. Review of bone scaffold design concepts and design methods. Facta Universitatis, Ser: Mech Eng. 2023;21:151–73.10.22190/FUME200328038M ↗
28. Jin M, Feng Q, Fan X, Luo Z, Tang Q, Song J, Ma S, Nie Y, Jin P, Zhao M. Investigation on the mechanical properties of TPMS porous structures fabricated by laser powder bed fusion. J Manuf Process. 2022;76:559–74.10.1016/j.jmapro.2022.02.035 ↗
29. Zhang X-Y, Yan X-C, Fang G, Liu M. Biomechanical influence of structural variation strategies on functionally graded scaffolds constructed with triply periodic minimal surface. Addit Manuf. 2020;32: 101015.
30. Zhang X-Y, Fang G, Xing L-L, Liu W, Zhou J. Effect of porosity variation strategy on the performance of functionally graded Ti-6Al-4V scaffolds for bone tissue engineering. Mater Des. 2018;157:523–38.10.1016/j.matdes.2018.07.064 ↗
31. Chen W, Dai N, Wang J, Liu H, Li D, Liu L. Personalized design of functional gradient bone tissue engineering scaffold. J Biomech Eng. 2019. https://doi.org/10.1115/1.4043559.10.1115/1.4043559 ↗
32. Gómez S, Vlad MD, López J, Fernández E. Design and properties of 3D scaffolds for bone tissue engineering. Acta Biomater. 2016;42:341–50.10.1016/j.actbio.2016.06.032 ↗
33. Lehder EF, Ashcroft IA, Wildman RD, Ruiz-Cantu LA, Maskery I. A multiscale optimisation method for bone growth scaffolds based on triply periodic minimal surfaces. Biomech Model Mechanobiol. 2021;20:2085–96.10.1007/s10237-021-01496-8 ↗
34. Yao D, Zhao Z, Wei Y, Li J. Gradient scaffolds developed by parametric modeling with selective laser sintering. Int J Mech Sci. 2023;248: 108221.
35. Zhao Z, Li J, Yao D, Wei Y. Mechanical and permeability properties of porous scaffolds developed by a voronoi tessellation for bone tissue engineering. J Mater Chem B. 2022;10:9699–712.10.1039/D2TB01478E ↗
36. Liu Z, Gong H, Gao J, Liu L. Bio-inspired design, mechanical and mass-transport characterizations of orthotropic TPMS-based scaffold. Compos Struct. 2023;321: 117256.
37. Pires T, Dunlop JWC, Fernandes PR, Castro APG. Challenges in computational fluid dynamics applications for bone tissue engineering. Proc R Soc Lond A Math Phys Eng Sci. 2022;478: 20210607.
38. Foroughi AH, Liu D, Razavi MJ. Simultaneous optimization of stiffness, permeability, and surface area in metallic bone scaffolds. Int J Eng Sci. 2023;193: 103961.10.1016/j.ijengsci.2023.103961 ↗
39. Pan R, Yang L, Zheng L, Hao L, Li Y. Microscopic morphology, thermodynamic and mechanical properties of thermoplastic polyurethane fabricated by selective laser sintering. Mater Res Express. 2020;7: 055301.
40. Qiu N, Wan Y, Shen Y, Fang J. Experimental and numerical studies on mechanical properties of TPMS structures. Int J Mech Sci. 2024;261: 108657.
41. Zhang X, Jiang L, Yan X, Wang Z, Li X, Fang G. Revealing the apparent and local mechanical properties of heterogeneous lattice: a multi-scale study of functionally graded scaffold. Virtual Phys Prototyping. 2023;18: e2120406.
42. Zhang X, Yan S, Xie X, Li Y, Wang C, Wen P. Multi-dimensional hybridized TPMS with high energy absorption capacity. Int J Mech Sci. 2024;273: 109244.
43. Préve D, Lenarda P, Maskery I, Paggi M. A comprehensive characterization of fracture in unit cell open foams generated from Triply Periodic Minimal Surfaces. Eng Fract Mech. 2023;277: 108949.10.1016/j.engfracmech.2022.108949 ↗
44. Lu Y, Zhao W, Cui Z, Zhu H, Wu C. The anisotropic elastic behavior of the widely-used triply-periodic minimal surface based scaffolds. J Mech Behav Biomed Mater. 2019;99:56–65.10.1016/j.jmbbm.2019.07.012 ↗
45. Sang L, Wu W, Sun Z, Wang F, Xu J, Tian J, Zhao Y, Zhang H. Reusability and energy absorption behavior of 4D-printed heterogeneous lattice structures based on biomass shape memory polyester. J Mater Res Technol. 2023;27:1563–78.10.1016/j.jmrt.2023.09.323 ↗
46. Yuan S, Shen F, Bai J, Chua CK, Wei J, Zhou K. 3D soft auxetic lattice structures fabricated by selective laser sintering: TPU powder evaluation and process optimization. Mater Des. 2017;120:317–27.10.1016/j.matdes.2017.01.098 ↗
47. Singh S, Yadav SK, Meena VK, Vashisth P, Kalyanasundaram D. Orthopedic scaffolds: evaluation of structural strength and permeability of fluid flow via an open cell neovius structure for bone tissue engineering. ACS Biomater Sci Eng. 2023;9:5900–11.10.1021/acsbiomaterials.3c00436 ↗
48. Ali D, Ozalp M, Blanquer SBG, Onel S. Permeability and fluid flow-induced wall shear stress in bone scaffolds with TPMS and lattice architectures: a CFD analysis. Eur J Mech B Fluids. 2020;79:376–85.10.1016/j.euromechflu.2019.09.015 ↗
49. Chao L, Jiao C, Liang H, Xie D, Shen L, Liu Z. Analysis of mechanical properties and permeability of trabecular-like porous scaffold by additive manufacturing. Front Bioeng Biotechnol. 2021;9: 779854.10.3389/fbioe.2021.779854 ↗
50. Chen H, Liu Y, Lu Y, Zhang A, Yang W, Han Q, Wang J. Bamboo-inspired porous scaffolds for advanced orthopedic implants: design, mechanical properties, and fluid characteristics. ACS Biomater Sci Eng. 2024;10:1173–89.10.1021/acsbiomaterials.3c01690 ↗
51. Dias MR, Fernandes PR, Guedes JM, Hollister SJ. Permeability analysis of scaffolds for bone tissue engineering. J Biomech. 2012;45:938–44.10.1016/j.jbiomech.2012.01.019 ↗
52. Li J, Yang Y, Sun Z, Peng K, Liu K, Xu P, Li J, Wei X, He X. Integrated evaluation of biomechanical and biological properties of the biomimetic structural bone scaffold: biomechanics, simulation analysis, and osteogenesis. Mater Today Bio. 2024;24: 100934.
53. Jiang Y, Shi K, Zhou L, He M, Zhu C, Wang J, Li J, Li Y, Liu L, Sun D, Feng G, Yi Y, Zhang L. 3D-printed auxetic-structured intervertebral disc implant for potential treatment of lumbar herniated disc. Bioact Mater. 2023;20:528–38.