The effect of annealing on the growth of Al3Ni and Al3Ni2 intermetallics at the interface of explosively welded Al/Ni clads
Source abstract
Abstract
Abstract Explosive welding is an effective method for joining metals with dissimilar physicochemical properties. The Al/Ni system is particularly interesting due to the formation of intermetallic phases with unique mechanical and thermal properties, which makes these welds potentially applicable in industries, such as aerospace, energy, and chemical. Diffusion processes occurring at the interface between these metals play a significant role and can impact the durability of the connections. Therefore, this research focuses on the analysis of diffusion phenomena in Al/Ni welds formed by explosive welding and subjected to further annealing. It was investigated whether the technological parameters of the joining process, such as detonation velocity, which varied from 2000 to 2800 m/s or mutual localization of the colliding plates during the explosion, influence post-annealing interface transformations, in particular the sequence of the intermetallic phase formation, their thickness and growth mechanism. Welded clads underwent annealing at 500 °C for periods ranging from 0.5 to 168 h. After the heat treatment, microstructure and phase characterization of the interface zone were performed, with scanning and transmission electron microscopy, thanks to which the mechanisms and growth kinetics of the forming phases were determined. Additionally, for the first time, the anisotropy of the thermal expansion in explosively welded Al/Ni was examined with respect to the shock wave propagation and the accompanying microstructure evolution, providing a significant contribution to the engineering design of welds subjected to the thermal cycling. The thermal expansion coefficient was measured over the temperature range from ambient temperature to 500 °C and analyzed in relation to the welding conditions. Differences in the thickness of the two forming Al3Ni and Al3Ni2 layers and their dominant growth mechanisms were observed for the individual clads. The effect of detonation velocity was particularly significant at 2000 m/s, where prolonged annealing led to weld degradation, thus limiting strength due to unfavorable welding conditions. The presence of porosity identified at the Al1050/Al3Ni2 interface was attributed to the Kirkendall effect accompanying the annealing procedure. Measurements of the thermal expansion coefficient revealed minor differences between samples, with the largest discrepancies observed for clads produced at 2400 m/s, which may be due to the less uniform initial microstructure of the interface. The obtained results indicate a relationship between explosive welding conditions and changes in the microstructure and physical properties of Al/Ni welds after heat treatment.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · Advanced Welding Techniques Analysis · Titanium Alloys Microstructure and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (55)
Show source-provided references
1. Chou SN, Huang JL, Lii DF, Lu HH. The mechanical properties and microstructure of Al2O3/aluminum alloy composites fabricated by squeeze casting. J Alloys Compd. 2007. https://doi.org/10.1016/j.jallcom.2006.07.062.10.1016/j.jallcom.2006.07.062 ↗
2. Pieczonka T. Dylatometryczne metody wyznaczania liniowego współczynnika rozszerzalności termicznej ciał stałych. Kraków: Akademia Górniczo-Hutnicza w Krakowie; 2010.
3. Janssen MMP, Rieck GD. Reaction diffusion and Kirkendall-effect in the nickel-aluminum system. Trans Metall Soc AIME. 1967;239:1372–85.
4. Nash P. Phase diagrams of binary nickel alloys. Materials Park: ASM International; 1991.
5. Konieczny M, Mola R, Thomas P, Kopcial M. Processing, microstructure and properties of laminated Ni-intermetallic composites synthesized using Ni sheets and Al foils. Arch Met Mater. 2011. https://doi.org/10.2478/v10172-011-0076-y.10.2478/v10172-011-0076-y ↗
6. Jozwik P, Polkowski W, Bojar Z. Applications of Ni3Al based intermetallic alloys—current stage and potential perceptivities. Materials. 2015. https://doi.org/10.3390/ma8052537.10.3390/ma8052537 ↗
7. Okamoto H. Al–Ni (aluminum-nickel). J Phase Equilib Diffus. 2004. https://doi.org/10.1007/s11669-004-0163-0.10.1007/s11669-004-0163-0 ↗
8. Pasturel A, Colinet C, Paxton AT, Van Schilfgaarde M. First-principles determination of the Ni-Al phase diagram. J Phys Condens Matter. 1992. https://doi.org/10.1088/0953-8984/4/4/005.10.1088/0953-8984/4/4/005 ↗
9. López GA, Sommadossi S, Zieba P, Gust W, Mittemeijer EJ. Kinetic behaviour of diffusion-soldered Ni/Al/Ni interconnections. Mater Chem Phys. 2003. https://doi.org/10.1016/S0254-0584(02)00232-8.10.1016/S0254-0584(02)00232-8 ↗
10. Kwiecien I, Bobrowski P, Wierzbicka-Miernik A, Litynska-Dobrzynska L, Wojewoda-Budka J. Growth kinetics of the selected intermetallic phases in Ni/Al/Ni system with various nickel substrate microstructure. Nanomaterials. 2019. https://doi.org/10.3390/nano9020134.10.3390/nano9020134 ↗
11. Ding Z, Hu Q, Lu W, Sun S, Xia M, Li J. In situ observation on the formation of intermetallics compounds at the interface of liquid Al/solid Ni. Scr Mater. 2017. https://doi.org/10.1016/j.scriptamat.2016.12.010.10.1016/j.scriptamat.2016.12.010 ↗
12. Tumminello S, Sommadossi S. Growth kinetics of intermetallic phases in transient liquid phase bonding process (TLPB) in Al/Ni system. Defect Diffus Forum. 2012. https://doi.org/10.4028/www.scientific.net/DDF.323-325.465.10.4028/www.scientific.net/DDF.323-325.465 ↗
13. Wołczynski W, Okane T, Senderowski C, Kania B, Zasada D, Janczak-Rusch J. Meta-stable conditions of diffusion brazing. Arch Met Mater. 2011. https://doi.org/10.2478/v10172-011-0035-7.10.2478/v10172-011-0035-7 ↗
14. Liu JC, Mayer JW, Barbour JC. Kinetics of NiAl3 and Ni2Al3 phase growth on lateral diffusion couples. J Appl Phys. 1988. https://doi.org/10.1063/1.341957.10.1063/1.341957 ↗
15. Azimi M, Toroghinejad MR, Shamanian M, Kestens L. The effect of strain on the formation of an intermetallic layer in an Al-Ni laminated composite. Metals. 2017. https://doi.org/10.3390/met7100445.10.3390/met7100445 ↗
16. Alimadadi H, Kjartansdottir C, Burrows A, Kasama T, Moller P. Nickel-aluminum diffusion: A study of evolution of microstructure and phase. Mater Charact. 2017. https://doi.org/10.1016/j.matchar.2017.05.039.10.1016/j.matchar.2017.05.039 ↗
17. Paul A, Van Dal MJH, Kodentsov AA, Van Loo FJJ. The kirkendall effect in multiphase diffusion. Acta Mater. 2004. https://doi.org/10.1016/j.actamat.2003.10.007.10.1016/j.actamat.2003.10.007 ↗
18. Castleman LS, Seigle LL. Layer growth during interdiffusion in the alumium-nickel alloy system. Tran Metall Soc AIME. 1958;212:589–96.
19. Castleman LS, Froot AH. Nucleation of intermetallic phases in Aluminum-Nickel diffusion couples. Tech Notes. 1963;56:103–9.
20. Simoes S, Ramos AS, Viana F, Emadinia O, Vieira MT, Vieira MF. Ni/Al multilayers produced by accumulative roll bonding and sputtering. J Mater Eng Perform. 2016. https://doi.org/10.1007/s11665-016-2304-0.10.1007/s11665-016-2304-0 ↗
21. Mozaffari A, Danesh Manesh H, Janghorban K. Evaluation of mechanical properties and structure of multilayered Al/Ni composites produced by accumulative roll bonding (ARB) process. J Alloys Compd. 2010. https://doi.org/10.1016/j.jallcom.2009.09.022.10.1016/j.jallcom.2009.09.022 ↗
22. Brunelli K, Peruzzo L, Dabala M. The effect of prolonged heat treatments on the microstructural evolution of Al/Ni intermetallic compounds in multi layered composites. Mater Chem Phys. 2015. https://doi.org/10.1016/j.matchemphys.2014.10.028.10.1016/j.matchemphys.2014.10.028 ↗
23. Gerland M, Presles HN, Guin JP, Bertheau D. Explosive cladding of a thin Ni-film to an aluminium alloy. Mater Sci Eng A. 2000. https://doi.org/10.1016/S0921-5093(99)00695-4.10.1016/S0921-5093(99)00695-4 ↗
24. Bataev IA, Ogneva TS, Bataev AA, Mali VI, Esikov MA, Lazurenko DV, et al. Explosively welded multilayer Ni-Al composites. Mater Des. 2015. https://doi.org/10.1016/j.matdes.2015.09.103.10.1016/j.matdes.2015.09.103 ↗
25. Ogneva TS, Lazurenko DV, Bataev IA, Mali VI, Esikov MA, Bataev AA. Formation of intermetallics at the interface of explosively welded Ni-Al multilayered composites during annealing. IOP Conf Ser Mater Sci Eng. 2016. https://doi.org/10.1088/1757-899X/124/1/012132.10.1088/1757-899X/124/1/012132 ↗
26. Guo X, Ma Y, Jin K, Wang H, Tao J, Fan M. Effect of stand-off distance on the microstructure and mechanical properties of Ni/Al/Ni laminates prepared by explosive bonding. J Mater Eng Perform. 2017. https://doi.org/10.1007/s11665-017-2890-5.10.1007/s11665-017-2890-5 ↗
27. Bugajska M, Sypien A, Bobrowski P, Korneva A, Morgiel J, Szulc Z, et al. Microstructural characterization of Nb/Inconel 601 interface obtained in the explosive welding process. Microsc Microanal. 2022. https://doi.org/10.1017/S1431927621012174.10.1017/S1431927621012174 ↗
28. Chu Q, Tong X, Xu S, Zhang M, Li J, Yan FX, et al. Interfacial investigation of explosion-welded titanium/steel bimetallic plates. J Mater Eng Perform. 2020. https://doi.org/10.1007/s11665-019-04535-9.10.1007/s11665-019-04535-9 ↗
29. Fronczek DM, Chulist R, Szulc Z, Wojewoda-Budka J. Growth kinetics of TiAl3 phase in annealed Al/Ti/Al explosively welded clads. Mater Lett. 2017. https://doi.org/10.1016/j.matlet.2017.04.025.10.1016/j.matlet.2017.04.025 ↗
30. Kumar P, Ghosh SK, Saravanan S, Barma JD. Significance of the interlayer in explosive welding of similar and dissimilar materials: review. Combust Explos Shock Waves. 2023. https://doi.org/10.1134/S0010508223030012.10.1134/S0010508223030012 ↗
31. Kumar P, Ghosh SK, Saravanan S, Barma JD, Bhogendro Meitei RK. Effects of reinforcements in Al 5052 and AZ31B explosively weld composites. Arch Civ Mech Eng. 2024. https://doi.org/10.1007/s43452-024-00940-7.10.1007/s43452-024-00940-7 ↗
32. Kumar P, Ghosh SK, Saravanan S, Barma JD. Effect of explosive loading ratio on microstructure and mechanical properties of Al 5052/AZ31B explosive weld composite. JOM. 2023. https://doi.org/10.1007/s11837-022-05579-4.10.1007/s11837-022-05579-4 ↗
33. Fronczek DM, Chulist R, Litynska-Dobrzynska L, Szulc Z, Zieba P, Wojewoda-Budka J. Microstructure changes and phase growth occurring at the interface of the Al/Ti explosively welded and annealed joints. J Mater Eng Perform. 2016. https://doi.org/10.1007/s11665-016-1978-7.10.1007/s11665-016-1978-7 ↗
34. Tsao CL, Chen SW. Interfacial reactions in the liquid diffusion couples of Mg/Ni, Al/Ni and Al/(Ni)-Al2O3 systems. J Mater Sci. 1995. https://doi.org/10.1007/BF00356072.10.1007/BF00356072 ↗
35. Buche K, Barbier F, Coulet A. Phase formation during dissolution of nickel in liquid aluminium. Z Metallkd. 1995;88:446–51.
36. Ding Z, Hu Q, Lu W, Xu X, Ge X, Cao S, et al. A full view of the interfacial behavior between the liquid Al and solid Ni by synchrotron radiation. Metall Mater Trans A. 2019. https://doi.org/10.1007/s11661-018-4965-9.10.1007/s11661-018-4965-9 ↗
37. Pedraza F, Mollard M, Rannou B, Balmain J, Bouchaud B, Bonnet G. Potential thermal barrier coating systems from Al microparticles. Mechanisms of coating formation on pure nickel. Mater Chem Phys. 2012. https://doi.org/10.1016/j.matchemphys.2012.03.053.10.1016/j.matchemphys.2012.03.053 ↗
38. Galetz MC, Montero X, Mollard M, Günthner M, Pedraza F, Schütze M. The role of combustion synthesis in the formation of slurry aluminization. Intermetallics. 2014. https://doi.org/10.1016/j.intermet.2013.08.002.10.1016/j.intermet.2013.08.002 ↗
39. Zhang ZX, Jiang H, Russell AM, Skrotzki W, Müller E, Schneider R, et al. Microstructural evolution and phase transformation in the liquid-solid Al/Ni diffusion couple. Philos Mag. 2019. https://doi.org/10.1080/14786435.2019.1575531.10.1080/14786435.2019.1575531 ↗
40. Arbo SM, Bergh T, Holmedal B, Vullum PE, Westermann I. Relationship between Al-Ni intermetallic phases and bond strength in roll bonded steel-aluminum composites with nickel interlayers. Metals. 2019. https://doi.org/10.3390/met9080827.10.3390/met9080827 ↗
41. Kwiecien I, Bobrowski P, Janusz-Skuza M, Wierzbicka-Miernik A, Tarasek A, Szulc Z, et al. Interface characterization of Ni/Al bimetallic explosively welded plate manufactured with application of exceptionally high detonation speed. J Mater Eng Perform. 2020. https://doi.org/10.1007/s11665-020-05117-w.10.1007/s11665-020-05117-w ↗
42. Kwiecien I, Wierzbicka-Miernik A, Szczerba M, Bobrowski P, Szulc Z, Wojewoda-Budka J. On the disintegration of A1050/Ni201 explosively welded clads induced by long-term annealing. Materials. 2021. https://doi.org/10.3390/MA14112931.10.3390/MA14112931 ↗
43. Prazmowski M. Mechanical properties of zirconium/steel bimetal fabricated by means of explosive welding at varied detonation velocities. Arch Met Mater. 2014. https://doi.org/10.2478/amm-2014-0198.10.2478/amm-2014-0198 ↗
44. Prazmowski M, Paul H. The effect of stand-off distance on the structure and properties of zirconium - Carbon steel bimetal produced by explosion welding. Arch Met Mater. 2012. https://doi.org/10.2478/v10172-012-0134-0.10.2478/v10172-012-0134-0 ↗
45. Kwiecien I, Bobrowski P, Janusz-Skuza M, Wierzbicka-Miernik A, Szulc Z, Wojewoda-Budka J. Microstructure of the interface zone after explosive welding and further annealing of A1050/Ni201 clads using various joining conditions. J Mater Sci. 2020. https://doi.org/10.1007/s10853-019-04317-7.10.1007/s10853-019-04317-7 ↗
46. Loureiro A, Mendes R, Ribeiro JB, Leal RM. Effect of explosive ratio on explosive welding quality of copper to aluminium. Ciência Tecnol Mater. 2017. https://doi.org/10.1016/j.ctmat.2016.06.012.10.1016/j.ctmat.2016.06.012 ↗
47. Ainutdinov FA, Khairidinov SK, Vakhobov AV. Phase diagram of the system aluminum-barium-nickel. Dokl Akad Nauk Tadzh. 1987;30:169–72.
48. Burkhardt U, Grin Y, Ellner M, Peters K. Structure refinement of the iron–aluminium phase with the approximate composition Fe2Al5. Acta Crystallogr B. 1994. https://doi.org/10.1107/S0108768193013989.10.1107/S0108768193013989 ↗
49. Emurlaeva Y, Ryabinkina PA, Lazurenko DV, Bataev AA. Special features of growth of intermetallic phases during annealing of Nickel-Aluminum composites. Met Sci Heat Treat. 2022. https://doi.org/10.1007/s11041-022-00745-6.10.1007/s11041-022-00745-6 ↗
50. Mehrer H. Diffusion in intermetallics. Mater Trans, JIM. 1996. https://doi.org/10.2320/matertrans1989.37.1259.10.2320/matertrans1989.37.1259 ↗
51. Li C, Yuan Z, Guo R, Xuan W, Ren W, Zhong Y, et al. Reaction diffusion in Ni-Al diffusion couples in steady magnetic fields. J Alloys Compd. 2015. https://doi.org/10.1016/j.jallcom.2015.04.061.10.1016/j.jallcom.2015.04.061 ↗
52. Van Loo FJJ. Multiphase diffusion in binary and ternary solid-state systems. Prog Solid State Chem. 1990. https://doi.org/10.1016/0079-6786(90)90007-3.10.1016/0079-6786(90)90007-3 ↗
53. Paul A, Kodentsov AA, Van Loo FJJ. Bifurcation of the Kirkendall plane during interdiffusion in the intermetallic compound β-NiAl. Acta Mater. 2004. https://doi.org/10.1016/j.actamat.2004.05.028.10.1016/j.actamat.2004.05.028 ↗
54. Adabi M, Amadeh AA. Formation mechanisms of Ni-Al intermetallics during heat treatment of Ni coating on 6061 Al substrate. Trans Nonferrous Met Soc China. 2015. https://doi.org/10.1016/S1003-6326(15)64073-0.10.1016/S1003-6326(15)64073-0 ↗
55. Paul H, Morgiel J, Baudin T, Brisset F, Prazmowski M, Miszczyk M. Characterization of explosive weld joints by TEM and SEM/EBSD. Arch Met Mater. 2014. https://doi.org/10.2478/amm-2014-0197.10.2478/amm-2014-0197 ↗