Fabrication of a prototype of bumper beam by single point incremental forming of laser welded tailored blank and characterization of its quasi-static crushing performance
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Metal Forming Simulation Techniques · Metallurgy and Material Forming · Advanced machining processes and optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. Duc-Toan N, Seung-Han Y, Dong-Won J, Tae-Hoon C, Young-Suk K. Incremental sheet metal forming: Numerical simulation and rapid prototyping process to make an automobile white-body. Steel Res Int. 2011;82:795–805. https://doi.org/10.1002/srin.201000284.10.1002/srin.201000284 ↗
2. Behera AK, de Sousa RA, Ingarao G, Oleksik V. Single point incremental forming: an assessment of the progress and technology trends from 2005 to 2015. J Manuf Process. 2017;27:37–62. https://doi.org/10.1016/j.jmapro.2017.03.014.10.1016/j.jmapro.2017.03.014 ↗
3. Duflou JR, Habraken AM, Cao J, Malhotra R, Bambach M, Adams D, Vanhove H, Mohammadi A, Jeswiet J. Single point incremental forming: state-of-the-art and prospects. Int J Mater Form. 2018;11:743–73. https://doi.org/10.1007/s12289-017-1387-y.10.1007/s12289-017-1387-y ↗
4. Silva MB, Skjoedt M, Atkins AG, Bay N, Martins PAF. Single-point incremental forming and formability—failure diagrams. J Strain Anal Eng Des. 2008;43:15–35. https://doi.org/10.1243/03093247JSA340.10.1243/03093247JSA340 ↗
5. Katiyar BS, Panda SK, Saha P. Experimental and numerical analyses on crushing behaviour of drawn cups of laser welded tailored blanks under axial loading. Arch Civ Mech Eng. 2022;22:1–15. https://doi.org/10.1007/s43452-022-00537-y.10.1007/s43452-022-00537-y ↗
6. Xu F, Sun G, Li G, Li Q. Experimental study on crashworthiness of tailor-welded blank (TWB) thin-walled high-strength steel (HSS) tubular structures. Thin-Wall Struct. 2014;74:12–27. https://doi.org/10.1016/j.tws.2013.08.021.10.1016/j.tws.2013.08.021 ↗
7. Katiyar BS, Panda SK, Saha P. Quasi-static crushing behavior of stretch formed domes of laser welded tailored blanks. Thin-Wall Struct. 2021;159: 107288. https://doi.org/10.1016/j.tws.2020.107288.10.1016/j.tws.2020.107288 ↗
8. Ahmetoglu MA, Brouwers D, Shulkin L, Taupin L, Kinzel GL, Altan T. Deep drawing of round cups from tailor-welded blanks. J Mater Process Tech. 1995;53:684–94. https://doi.org/10.1016/0924-0136(94)01767-U.10.1016/0924-0136(94)01767-U ↗
9. Bandyopadhyay K, Panda SK, Saha P, Padmanabham G. Limiting drawing ratio and deep drawing behavior of dual phase steel tailor welded blanks: FE simulation and experimental validation. J Mater Process Technol. 2015;217:48–64. https://doi.org/10.1016/j.jmatprotec.2014.10.022.10.1016/j.jmatprotec.2014.10.022 ↗
10. Basak S, Katiyar BS, Orozco-Gonzalez P, Baltazar-Hernandez VH, Arora KS, Panda SK. Microstructure, forming limit diagram, and strain distribution of pre-strained DP-IF steel tailor–welded blank for auto body application. Int J Adv Manuf Technol. 2019;104:1749–67. https://doi.org/10.1007/s00170-019-03938-1.10.1007/s00170-019-03938-1 ↗
11. Heo YM, Wang SH, Kim HY, Seo DG. The effect of the drawbead dimensions on the weld-line movements in the deep drawing of tailor-welded blanks. J Mater Process Technol. 2001;113:686–91. https://doi.org/10.1016/S0924-0136(01)00672-0.10.1016/S0924-0136(01)00672-0 ↗
12. Kumar G, Maji K. Forming limit analysis of friction stir tailor welded AA5083 and AA7075 sheets in single point incremental forming. Int J Mater Form. 2022. https://doi.org/10.1007/s12289-022-01675-7.10.1007/s12289-022-01675-7 ↗
13. Ebrahimzadeh P, Baseri H, Mirnia MJ. Formability of aluminum 5083 friction stir welded blank in two-point incremental forming process. Proc Inst Mech Eng Part E J Process Mech Eng. 2018;232:267–80. https://doi.org/10.1177/0954408917692370.10.1177/0954408917692370 ↗
14. Silva MB, Skjoedt M, Vilaça P, Bay N, Martins PAF. Single point incremental forming of tailored blanks produced by friction stir welding. J Mater Process Technol. 2009;209:811–20. https://doi.org/10.1016/j.jmatprotec.2008.02.057.10.1016/j.jmatprotec.2008.02.057 ↗
15. Davoodi MM, Sapuan SM, Aidy A, Abu Osman NA, Oshkour AA, Wan Abas WAB. Development process of new bumper beam for passenger car: a review. Mater Des. 2012;40:304–13. https://doi.org/10.1016/j.matdes.2012.03.060.10.1016/j.matdes.2012.03.060 ↗
16. Múnera DD, Pinard F, Lacassin L. Very and ultra high strength steels based tailored welded blanks: a step further towards crashworthiness improvement. SAE Tech Pap. 2006;115:796–804. https://doi.org/10.4271/2006-01-1213.10.4271/2006-01-1213 ↗
17. Xu F, Wang C. Dynamic axial crashing of tailor-welded blanks (TWBs) thin-walled structures with top-hat shaped section. Adv Eng Softw. 2016;96:70–82. https://doi.org/10.1016/j.advengsoft.2016.02.003.10.1016/j.advengsoft.2016.02.003 ↗
18. Saunders FI, Wagoner RH. Forming of tailor-welded blanks. Metall Mater Trans A. 1996;27:2605–16. https://doi.org/10.1007/BF02652354.10.1007/BF02652354 ↗
19. Zadpoor AA, Sinke J, Benedictus R. Finite element modeling and failure prediction of friction stir welded blanks. Mater Des. 2009;30:1423–34. https://doi.org/10.1016/j.matdes.2008.08.018.10.1016/j.matdes.2008.08.018 ↗
20. Gaied S, Roelandt JM, Pinard F, Schmit F, Balabane M. Experimental and numerical assessment of Tailor-Welded Blanks formability. J Mater Process Technol. 2009;209:387–95. https://doi.org/10.1016/j.jmatprotec.2008.02.031.10.1016/j.jmatprotec.2008.02.031 ↗
21. Hariharan K, Nguyen NT, Chakraborti N, Lee MG, Barlat F. Multi-objective genetic algorithm to optimize variable drawbead geometry for tailor welded blanks made of dissimilar steels. Steel Res Int. 2014;85:1597–607. https://doi.org/10.1002/srin.201300471.10.1002/srin.201300471 ↗
22. Kohar CP, Mohammadi M, Mishra RK, Inal K. The effects of the yield surface curvature and anisotropy constants on the axial crush response of circular crush tubes. Thin-Wall Struct. 2016;106:28–50. https://doi.org/10.1016/j.tws.2016.04.021.10.1016/j.tws.2016.04.021 ↗
23. Ghorbel O, Koubaa S, Mars J, Wali M, Dammak F. Non associated-anisotropic plasticity model fully coupled with isotropic ductile damage for sheet metal forming applications. Int J Solids Struct. 2019;166:96–111. https://doi.org/10.1016/j.ijsolstr.2019.02.010.10.1016/j.ijsolstr.2019.02.010 ↗
24. Safaei M, Zang SL, Lee MG, De Waele W. Evaluation of anisotropic constitutive models: mixed anisotropic hardening and non-associated flow rule approach. Int J Mech Sci. 2013;73:53–68. https://doi.org/10.1016/j.ijmecsci.2013.04.003.10.1016/j.ijmecsci.2013.04.003 ↗
25. Stoughton TB. A non-associated flow rule for sheet metal forming. Int J Plast. 2002;18:687–714. https://doi.org/10.1016/S0749-6419(01)00053-5.10.1016/S0749-6419(01)00053-5 ↗
26. Stoughton TB, Yoon JW. A pressure-sensitive yield criterion under a non-associated flow rule for sheet metal forming. Int J Plast. 2004;20:705–31. https://doi.org/10.1016/S0749-6419(03)00079-2.10.1016/S0749-6419(03)00079-2 ↗
27. Sindrey DA. Steel bumper systems for passenger cars and light trucks. SAE Tech Pap. 1999;108:875–83. https://doi.org/10.4271/1999-01-1007.10.4271/1999-01-1007 ↗
28. Öztürk İ. Design and optimisation of hybrid material bumper beams under impact loading. Int J Crashworth. 2022;27:835–46. https://doi.org/10.1080/13588265.2020.1858626.10.1080/13588265.2020.1858626 ↗
29. Banabic D. Plastic behaviour of sheet metal. In: Sugan R, editor. Sheet met. form. process. Berlin: Springer; 2010. p. 27–140. https://doi.org/10.1007/978-3-540-88113-1_2.10.1007/978-3-540-88113-1_2 ↗
30. Barlat F, Yoon JW, Cazacu O. On linear transformations of stress tensors for the description of plastic anisotropy. Int J Plast. 2007;23:876–96. https://doi.org/10.1016/j.ijplas.2006.10.001.10.1016/j.ijplas.2006.10.001 ↗
31. Banabic D, Aretz H, Comsa DS, Paraianu L. An improved analytical description of orthotropy in metallic sheets. Int J Plast. 2005;21:493–512. https://doi.org/10.1016/j.ijplas.2004.04.003.10.1016/j.ijplas.2004.04.003 ↗
32. Barlat F, Aretz H, Yoon JW, Karabin ME, Brem JC, Dick RE. Linear transfomation-based anisotropic yield functions. Int J Plast. 2005;21:1009–39. https://doi.org/10.1016/j.ijplas.2004.06.004.10.1016/j.ijplas.2004.06.004 ↗
33. Yoon JW, Yang DY, Chung K, Barlat F. General elasto-plastic finite element formulation based on incremental deformation theory for planar anisotropy and its application to sheet metal forming. Int J Plast. 1999;15:35–67. https://doi.org/10.1016/S0749-6419(98)00059-X.10.1016/S0749-6419(98)00059-X ↗
34. Spitzig WA, Richmond O. The effect of pressure on the flow stress of metals. Acta Metall. 1984;32:457–63. https://doi.org/10.1016/0001-6160(84)90119-6.10.1016/0001-6160(84)90119-6 ↗
35. Lee JH. Research note on a simple model for pressure-sensitive strain-hardening materials. Int J Plast. 1988;4:265–78. https://doi.org/10.1016/0749-6419(88)90014-9.10.1016/0749-6419(88)90014-9 ↗
36. Hill R. A theory of the yielding and plastic flow of anisotropic metals. Proc R Soc Lond Ser A Math Phys Sci. 1948;193:281–97. https://doi.org/10.1098/rspa.1948.0045.10.1098/rspa.1948.0045 ↗
37. Barlat F, Lian K. Plastic behavior and stretchability of sheet metals. Part I: a yield function for orthotropic sheets under plane stress conditions. Int J Plast. 1989;5:51–66. https://doi.org/10.1016/0749-6419(89)90019-3.10.1016/0749-6419(89)90019-3 ↗
38. ASTM E8, E8M. Standard test methods for tension testing of metallic materials. West Conshohocken: ASTM international; 2010. p. 1–27. https://doi.org/10.1520/E0008_E0008M-09.10.1520/E0008_E0008M-09 ↗
39. ASTM E-517. Standard Test Method for Plastic Strain Ratio r for Sheet Metal. West Conshohocken: ASTM international; 2010. p. 1–8. https://doi.org/10.1520/E0517-00R10.10.1520/E0517-00R10 ↗
40. Katiyar BS, Panda SK, Saha P. Effect of circular hole discontinuities on crushing characteristics of combined geometry shells of tailor welded blanks. J Mater Eng Perform. 2023. https://doi.org/10.1007/s11665-023-08157-0.10.1007/s11665-023-08157-0 ↗
41. Basak S, Panda SK. Implementation of Yld96 anisotropy plasticity theory for estimation of polar effective plastic strain based failure limit of pre-strained thin steels. Thin-Wall Struct. 2018;126:26–37. https://doi.org/10.1016/j.tws.2017.04.015.10.1016/j.tws.2017.04.015 ↗
42. Suresh K, Regalla SP. Effect of time scaling and mass scaling in numerical simulation of incremental forming. Appl Mech Mater. 2014;612:105–10. https://doi.org/10.4028/www.scientific.net/AMM.612.105.10.4028/www.scientific.net/AMM.612.105 ↗
43. Suresh K, Bagade SD, Regalla SP. Deformation behavior of extra deep drawing steel in single-point incremental forming. Mater Manuf Process. 2015;30:1202–9. https://doi.org/10.1080/10426914.2014.994755.10.1080/10426914.2014.994755 ↗
44. Basak S, Prasad KS, Sidpara AM, Panda SK. Single point incremental forming of AA6061 thin sheet: calibration of ductile fracture models incorporating anisotropy and post forming analyses. Int J Mater Form. 2019;12:623–42. https://doi.org/10.1007/s12289-018-1439-y.10.1007/s12289-018-1439-y ↗
45. Pandre S, Morchhale A, Mahalle G, Kotkunde N, Suresh K, Singh SK. Fracture limit analysis of DP590 steel using single point incremental forming: experimental approach, theoretical modeling and microstructural evolution. Arch Civ Mech Eng. 2021;21:95. https://doi.org/10.1007/s43452-021-00243-1.10.1007/s43452-021-00243-1 ↗
46. Hussain G, Alkahtani M. Analysis of wall curling in incremental forming of a sheet metal: role of residual stresses, stretching force and process conditions. J Mater Res Technol. 2021;11:1548–58. https://doi.org/10.1016/j.jmrt.2021.01.088.10.1016/j.jmrt.2021.01.088 ↗
47. Murugesan M, Youn HW, Yu JH, Chung W, Lee CW. Investigation of forming parameters influence on pillow defect in a new vacuum-assisted incremental sheet forming process. Int J Adv Manuf Technol. 2023;127:5531–51. https://doi.org/10.1007/s00170-023-11854-8.10.1007/s00170-023-11854-8 ↗
48. Ghasemabadian MA, Kadkhodayan M, Altenhof W, Bondy M, Magliaro J. An experimental study on the energy absorption characteristics of single- and bi-layer cups under quasi-static loading. Int J Crashworth. 2018. https://doi.org/10.1080/13588265.2018.1433348.10.1080/13588265.2018.1433348 ↗
49. Kokkula S, Langseth M, Hopperstad OS, Lademo OG. Offset impact behaviour of bumper beam-longitudinal systems: Experimental investigations. Int J Crashworth. 2006;11:299–316. https://doi.org/10.1533/ijcr.2005.0122.10.1533/ijcr.2005.0122 ↗
50. Sun G, Tian J, Liu T, Yan X, Huang X. Crashworthiness optimization of automotive parts with tailor rolled blank. Eng Struct. 2018;169:201–15. https://doi.org/10.1016/j.engstruct.2018.05.050.10.1016/j.engstruct.2018.05.050 ↗
51. Hsu SS, Jones N. Quasi-static and dynamic axial crushing of thin-walled circular stainless steel, mild steel and aluminium alloy tubes. Int J Crashworth. 2004;9:195–217. https://doi.org/10.1533/ijcr.2004.0282.10.1533/ijcr.2004.0282 ↗