Achieving Ultra-Fine Grains and Improved Mechanical Properties in a Mg-Zn-Al-Ca Alloy via Forward Extrusion and Post Decreased-Temperature Equal Channel Angular Pressing
Source abstract
Abstract
In this work, a Mg-Zn-Al-Ca alloy was processed by the combination of forward extrusion and post ECAP. The evolution and corresponding mechanism of the microstructure and mechanical properties of the Mg-5Zn-2Al-1Ca alloy were systematically investigated. As a result, the decreased-temperature ECAP processing contributes to the significant grain refinement and the production of substructures in the alloy. The minimum average grain size of 1.04 µm is achieved in the alloy after 2 passes of ECAP at 250 °C, followed by 2 passes of ECAP at 170 °C. Moreover, the texture type is changed from conventional basal fiber texture to shear texture after ECAP deformation. Consequently, the Mg-5Zn-2Al-1Ca alloy after the last 2 passes of ECAP at 170 °C exhibits excellent mechanical properties (ultimate tensile strength of ~ 350 MPa and an elongation of ~ 20%). The grain boundary strengthening and the texture strengthening as well as the Orowan strengthening effect are considered as the main contributors to the substantial increase in strength.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. Y. Yang, X.M. Xiong, J. Chen, X.D. Peng, D.L. Chen, and F.S. Pan, Research Advances in Magnesium and Magnesium Alloys Worldwide in 2020, J. Magnes. Alloy, 2021, 9, p 705–747.10.1016/j.jma.2021.04.001 ↗
2. K. Hagihara, R. Ueyama, M. Yamasaki, Y. Kawamura, and T. Nakano, Surprising Increase in yield Stress of Mg Single Crystal using Long-period Stacking Ordered Nanoplates, Acta Mater., 2021, 209, p 116797.10.1016/j.actamat.2021.116797 ↗
3. W.L. Xiao, S.M. Zhu, M.A. Easton, M.S. Dargusch, M.A. Gibson, and J.F. Nie, Microstructural Characterization of High Pressure die Cast Mg-Zn-Al-RE Alloys, Mater. Charact., 2012, 65, p 28–36.10.1016/j.matchar.2012.01.001 ↗
4. Z. Zhang, A. Couture, and A. Luo, An Investigation of the Properties of Mg-Zn-Al Alloys, Scr. Mater., 1998, 39, p 45–53.10.1016/S1359-6462(98)00122-5 ↗
5. Y. Wang, S.K. Guan, X.Q. Zeng, and W.J. Ding, Effects of RE on the Microstructure and Mechanical Properties of Mg-8Zn-4Al Magnesium Alloy, Mater. Sci. Eng. A, 2006, 416, p 109–118.10.1016/j.msea.2005.09.104 ↗
6. X.F. Wan, Y.S. Sun, F. Xue, J. Bai, and W.J. Tao, Effects of Sr and Ca on the Microstructure and Properties of Mg-12Zn-4Al-0.3Mn Alloy, Mater. Sci. Eng. A, 2009, 508, p 50–58.10.1016/j.msea.2008.12.046 ↗
7. Y.A. Chen, J.J. Gao, Y. Song, and Y. Wang, The Influences of Sr on the Microstructure and Mechanical Properties of Mg-5Zn-2Al Alloy, Mater. Sci. Eng. A, 2016, 671, p 127–134.10.1016/j.msea.2016.06.033 ↗
8. N. Mo, Q.Y. Tan, M. Bermingham, Y.D. Huang, H. Dieringa, N. Hort, and M.X. Zhang, Current Development of Creep-resistant Magnesium Cast Alloys: A Review, Mater. Des., 2018, 155, p 422–442.10.1016/j.matdes.2018.06.032 ↗
9. B. Kondori and R. Mahmudi, Effect of Ca Additions on the Microstructure and Creep Properties of a Cast Mg-Al-Mn Magnesium Alloy, Mater. Sci. Eng. A, 2017, 700, p 438–447.10.1016/j.msea.2017.06.007 ↗
10. Y.G. Jung, W. Yang, Y.J. Kim, S.K. Kim, Y.O. Yoon, H. Lim, and D.H. Kim, Effect of Ca Addition on the Microstructure and Mechanical Properties of Heat-treated Mg-6.0Zn-1.2Y-0.7Zr Alloy, J. Magnes. Alloy, 2021, 9, p 1619–1631.10.1016/j.jma.2021.01.010 ↗
11. B.L. Mordike and T. Ebert, Magnesium: Properties-Applications- Potential, Mater. Sci. Eng. A, 2001, 302, p 37–45.10.1016/S0921-5093(00)01351-4 ↗
12. L.B. Tong, J.H. Chu, W.T. Sun, C. Xu, D.N. Zou, K.S. Wang, S. Kamado, and M.Y. Zheng, Achieving an Ultra-high Strength and Moderate Ductility in Mg-Gd-Y-Zn-Zr Alloy via a Decreased-temperature Multi-directional Forging, Mater. Charact., 2021, 171, p 110804.10.1016/j.matchar.2020.110804 ↗
13. X.K. Kang, K.B. Nie, K.K. Deng, and Y.C. Guo, Effect of Extrusion Parameters on Microstructure, Texture and Mechanical Properties of Mg-1.38Zn-0.17Y-0.12Ca (at.%) Alloy, Mater. Charact., 2019, 151, p 137–145.10.1016/j.matchar.2019.03.004 ↗
14. S.E. Harandi, M.H. Idris, and H. Jafari, Effect of Forging Process on Microstructure, Mechanical and Corrosion Properties of Biodegradable Mg-1Ca Alloy, Mater. Des., 2011, 32, p 2596–2603.10.1016/j.matdes.2011.01.042 ↗
15. M.Z. Bian, X.S. Huang, and Y. Chino, Substantial Improvement in Cold Formability of Concentrated Mg-Al-Zn-Ca Alloy Sheets by High Temperature Final Rolling, Acta. Mater., 2021, 220, p 117328.10.1016/j.actamat.2021.117328 ↗
16. Y.X. Yuan, A.B. Ma, H.R. Wu, Z. Gao, Y.X. Gu, and J.H. Jiang, Optimizing Microstructure and Mechanical Properties of Biomedical Mg-Y-Zn-Mn Alloy with LPSO Phases by Solution Treatment Plus Equal-channel Angular Pressing, J. Mater. Res. Technol., 2022, 16, p 968–976.10.1016/j.jmrt.2021.12.047 ↗
17. L.B. Tong, J.H. Chu, Z.H. Jiang, S. Kamado, and M.Y. Zheng, Ultra-fine Grained Mg-Zn-Ca-Mn Alloy with Simultaneously Improved Strength and Ductility Processed by Equal Channel Angular Pressing, J. Alloy Compd., 2019, 785, p 410–421.10.1016/j.jallcom.2019.01.181 ↗
18. C. Wang, A.B. Ma, J.P. Sun, H. Liu, H. Huang, Z.Q. Yang, and J.H. Jiang, Effect of ECAP Process on As-cast and As-homogenized Mg-Al-Ca-Mn Alloys with Different Mg2Ca Morphologies, J. Alloy Compd., 2019, 793, p 259–270.10.1016/j.jallcom.2019.04.202 ↗
19. S.R. Agnew, J.A. Horton, T.M. Lillo, and D.W. Brown, Enhanced Ductility in Strongly Textured Magnesium Produced by Equal Channel Angular Processing, Scr. Mater., 2004, 50, p 377–381.10.1016/j.scriptamat.2003.10.006 ↗
20. W.N. Tang, R.S. Chen, and E.H. Han, Superplastic Behaviors of a Mg-Zn-Y-Zr Alloy Processed by Extrusion and Equal Channel Angular Extrusion, J. Alloy Compd., 2009, 477, p 636–643.10.1016/j.jallcom.2008.10.089 ↗
21. E.J. Kwak, C.H. Bok, M.H. Seo, T.S. Kim, and H.S. Kim, Processing and Mechanical Properties of Fine Grained Magnesium by Equal Channel Angular Pressing, Mater. Trans., 2008, 49, p 1006–1010.10.2320/matertrans.MC200725 ↗
22. B. Chen, D.L. Lin, L. Jin, X.Q. Zeng, and C. Lu, Equal-channel Angular Pressing of Magnesium Alloy AZ91 and its Effects on Microstructure and Mechanical Properties, Mater. Sci. Eng. A, 2008, 483–484, p 113–116.10.1016/j.msea.2006.10.199 ↗
23. D. Orlov, G. Raab, T.T. Lamark, M. Popov, and Y. Estrin, Improvement of Mechanical Properties of Magnesium Alloy ZK60 by Integrated Brokmeier, Microstructure and Tensile Property of the ECAPed Pure Magnesium Extrusion and Equal Channel Angular Pressing, Acta Mater., 2011, 59, p 375–385.10.1016/j.actamat.2010.09.043 ↗
24. Y.Z. Du, X.G. Qiao, M.Y. Zheng, K. Wu, and S.W. Xu, Development of High-strength, Low-cost Wrought Mg-2.5 Mass% Zn Alloy through Micro-alloying with Ca and La, Mater. Des., 2015, 85, p 549–557.10.1016/j.matdes.2015.07.029 ↗
25. L.B. Tong, M.Y. Zheng, S.W. Xu, S. Kamado, Y.Z. Du, X.S. Hu, K. Wu, W.M. Gan, H.G. Brokmeier, G.J. Wang, and X.Y. Lv, Effect of Mn Addition on Microstructure, Texture and Mechanical Properties of Mg-Zn-Ca Alloy, Mater. Sci. Eng. A, 2011, 10–11, p 3741–3747.10.1016/j.msea.2011.01.037 ↗
26. N. Stanford, The Effect of Calcium on the Texture, Microstructure and Mechanical Properties of Extruded Mg-Mn-Ca Alloys, Mater. Sci. Eng. A, 2010, 528, p 314–322.10.1016/j.msea.2010.08.097 ↗
27. W.M. Gan, M.Y. Zheng, H. Chang, X.J. Wang, X.G. Qiao, K. Wu, B. Schwebke, and H.G. Brokmeier, Microstructure and Tensile Property of the ECAPed Pure Magnesium, J. Alloy Compd., 2009, 470, p 256–262.10.1016/j.jallcom.2008.02.030 ↗
28. S.R. Agnew, P. Mehrotra, T.M. Lillo, G.M. Stoica, and P.K. Liaw, Texture Evolution of Five Wrought Magnesium Alloys during Route a Equal Channel Angular Extrusion: Experiments and Simulations, Acta Mater., 2005, 53, p 3135–3146.10.1016/j.actamat.2005.02.019 ↗
29. A. Gholinia, P.B. Prangnell, and M.V. Markushev, The Effect of Strain Path on the Development of Deformation Structures in Severely Deformed Aluminium Alloys Processed by ECAE, Acta Mater., 2000, 48, p 1115–1130.10.1016/S1359-6454(99)00388-2 ↗
30. Y. Ma, F.Y. Han, C. Liu, and M.Z. Li, Microstructure, Texture Evolution, and Mechanical Properties of ECAP-Processed ZAT522 Magnesium Alloy, Acta Metall. Sin. Engl., 2020, 33, p 233–242.10.1007/s40195-019-00969-1 ↗
31. P. Yang, L.N. Wang, X. Li, and M. Li, Orientation Factor Analysis of Deformation Mechanisms under Special Processing Techniques in AZ31 Magnesium Alloys, Acta Metall. Sin. Engl., 2010, 23, p 63–71.
32. E. Mostaed, M. Hashempour, and A. Fabrizi et al., Microstructure, Texture Evolution, Mechanical Properties and Corrosion Behavior of ECAP Processed ZK60 Magnesium Alloy for Biodegradable Applications[J], J. Mech. Behav. Biomed. Mater., 2014, 37, p 307–322.10.1016/j.jmbbm.2014.05.024 ↗
33. H. Huang, H. Liu, and C. Wang et al., Potential of Multi-pass ECAP on Improving the Mechanical Properties of a High-calcium-Content Mg-Al-Ca-Mn Alloy[J], J. Magnes. Alloy, 2019, 7(4), p 617–627.10.1016/j.jma.2019.04.008 ↗
34. H.H. Yu, Y.C. Xin, M.Y. Wang, and Q. Liu, Hall-petch Relationship in Mg Alloys: A Review, J. Mater. Sci. Technol., 2018, 34, p 248–256.10.1016/j.jmst.2017.07.022 ↗
35. J.Q. Hao, J.S. Zhang, B.Q. Li, and R.Z. Xie, Effects of 14H LPSO Phase on the Dynamic Recrystallization and Work Hardening Behaviors of an Extruded Mg-Zn-Y-Mn Alloy, Mater. Sci. Eng. A, 2021, 804, p 140727.10.1016/j.msea.2020.140727 ↗
36. L. Cheng, Q.W. Tian, H. Yu, H. Zhang, and B.S. You, Strengthening Mechanisms of Indirect-extruded Mg-Sn Based Alloys at Room Temperature, J. Magnes. Alloy., 2014, 2, p 299–304.10.1016/j.jma.2014.11.003 ↗
37. J.W. Luster, M. Thumann, and R. Baumann, Mechanical Properties of Aluminium Alloy 6061-Al2O3 Composites, Mater. Sci. Technol., 2013, 9, p 853–862.10.1179/026708393790171421 ↗