journal article·2013-06-28

Triple junction structure and carbide precipitation in 304L stainless steel

Yijian Zhou, Gino Palumbo, Karl T. Aust, Uwe Erb

Journal of Materials Research· Volume 28· Issue 12
Publisher page

Abstract

Type 304L stainless steel (SS) samples were used to investigate the correlation between carbide precipitation and triple junction structure derived from crystallographic data obtained by the orientation imaging microscopy associated with electron backscattered diffraction. The samples were solution treated and annealed at different sensitization temperatures/time to introduce various degrees of carbide precipitation at the interface region, thus different degrees of selectivity toward triple junctions. Four models were used to characterize triple junction microstructures: (i) the I-line and U-line model, (ii) the coincident axial direction (CAD) model, (iii) the coincident site lattice (CSL)/grain boundary (GB) model and (iv) the plane matching (PM)/GB model. Among them, the I-line and U-line model is the most effective in identifying special triple junctions, i.e., those exhibiting the beneficial property of high resistance to carbide precipitation. The results showed that the percentage of special triple junctions (I-lines) immune to carbide precipitation, increased from 35 to 80%, as the precipitation became more selective toward triple junction structures due to the corresponding sensitization heat treatment conditions, whereas more than 80% of random triple junctions (U-lines) exhibited susceptibility to carbide precipitation regardless of the sensitization conditions.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (71)

Show source-provided references
1. 10.1007/s10853-011-5393-z10.1007/s10853-011-5393-z ↗
2. 10.1016/j.scriptamat.2005.11.05710.1016/j.scriptamat.2005.11.057 ↗
3. 10.1016/0956-716X(90)90544-Q10.1016/0956-716X(90)90544-Q ↗
4. 10.1016/j.corsci.2011.02.00510.1016/j.corsci.2011.02.005 ↗
5. 10.1023/A:102005230649310.1023/A:1020052306493 ↗
6. 10.1016/j.actamat.2010.06.03910.1016/j.actamat.2010.06.039 ↗
7. 10.1021/nl300751q10.1021/nl300751q ↗
8. Aust · 1952 · 153
9. 10.1016/0956-716X(91)90376-C10.1016/0956-716X(91)90376-C ↗
10. Sherik · 1992 · 238 · 727
11. 10.1007/BF0115399210.1007/BF01153992 ↗
12. 10.1016/j.actamat.2006.03.04810.1016/j.actamat.2006.03.048 ↗
13. 10.1007/s10853-005-6500-910.1007/s10853-005-6500-9 ↗
14. Influence of ternary joint of grain on plasticity without diffusional mobility
15. 10.1016/j.ijsolstr.2011.07.00910.1016/j.ijsolstr.2011.07.009 ↗
16. 10.1016/0039-6028(72)90250-610.1016/0039-6028(72)90250-6 ↗
17. Loberg · 1976 · 1
18. 10.1016/0001-6160(82)90157-210.1016/0001-6160(82)90157-2 ↗
19. 10.1557/jmr.2012.5510.1557/jmr.2012.55 ↗
20. Bollmann · 1982
21. 10.1023/A:100876920926510.1023/A:1008769209265 ↗
22. 10.1016/S1359-6462(01)00990-310.1016/S1359-6462(01)00990-3 ↗
23. 10.1016/0956-7151(95)90290-210.1016/0956-7151(95)90290-2 ↗
24. 10.1016/S0921-5093(97)00124-X10.1016/S0921-5093(97)00124-X ↗
25. 10.1016/0956-716X(90)90354-J10.1016/0956-716X(90)90354-J ↗
26. 10.1103/PhysRev.78.27510.1103/PhysRev.78.275 ↗
27. 10.1016/0956-716X(91)90114-G10.1016/0956-716X(91)90114-G ↗
28. Morphology of grain-boundary carbides and its influence on intergranular corrosion of 304 stainless steel
29. 10.1016/S1359-6454(99)00120-210.1016/S1359-6454(99)00120-2 ↗
30. 10.1016/S0161-9160(13)70039-510.1016/S0161-9160(13)70039-5 ↗
31. 10.1016/0921-5093(89)90299-210.1016/0921-5093(89)90299-2 ↗
32. 10.1016/S0921-5093(00)01366-610.1016/S0921-5093(00)01366-6 ↗
33. Romanov · 1992 · 9 · 191
34. McLean · 1957
35. 10.1016/0502-8205(59)90014-010.1016/0502-8205(59)90014-0 ↗
36. High-angle grain boundaries10.1016/0079-6425(72)90017-5 ↗
37. Wolf · 1992
38. An approach to grain boundary design for strong and ductile polycrystals
39. 10.1179/026708309X1260195277774710.1179/026708309X12601952777747 ↗
40. 10.1016/j.actamat.2006.05.03510.1016/j.actamat.2006.05.035 ↗
41. 10.1016/j.actamat.2004.12.00610.1016/j.actamat.2004.12.006 ↗
42. 10.1002/pssa.221119024010.1002/pssa.2211190240 ↗
43. 10.1080/1478643070171698710.1080/14786430701716987 ↗
44. 10.1016/0956-716X(90)90091-T10.1016/0956-716X(90)90091-T ↗
45. 10.1080/0141861880821441310.1080/01418618808214413 ↗
46. 10.1016/0921-5093(91)90436-Q10.1016/0921-5093(91)90436-Q ↗
47. 10.1002/pssa.221110020810.1002/pssa.2211100208 ↗
48. 10.1016/0956-716X(93)90140-N10.1016/0956-716X(93)90140-N ↗
49. The nature of nickel-chromium rustless steels
50. Chromium carbide in stainless steel
51. 10.4028/www.scientific.net/MSF.46.30910.4028/www.scientific.net/MSF.46.309 ↗
52. 10.1016/0956-7151(90)90101-L10.1016/0956-7151(90)90101-L ↗
53. Metallography
54. Randle · 1992 · 70
55. 10.1007/s11837-000-0159-010.1007/s11837-000-0159-0 ↗
56. 10.1016/S0921-5093(00)00883-210.1016/S0921-5093(00)00883-2 ↗
57. 10.1107/S056773947400043X10.1107/S056773947400043X ↗
58. 10.1007/s10853-007-2236-z10.1007/s10853-007-2236-z ↗
59. 10.1016/0036-9748(72)90260-810.1016/0036-9748(72)90260-8 ↗
60. 10.1016/0921-5093(89)90300-610.1016/0921-5093(89)90300-6 ↗
61. 10.1080/0141861870820984610.1080/01418618708209846 ↗
62. Intergranular corrosion of austenitic stainless steels
63. 10.1016/0921-5093(94)90362-X10.1016/0921-5093(94)90362-X ↗
64. 10.1016/0921-5093(95)09875-510.1016/0921-5093(95)09875-5 ↗
65. The defect character of interface junction lines
66. Disclinations at grain boundary triple junctions: Between Bollmann disclinations and Volterra disclinations
67. 10.1023/A:100872142610410.1023/A:1008721426104 ↗
68. 10.1016/j.actamat.2004.11.00210.1016/j.actamat.2004.11.002 ↗
69. Cihal · 1984 · 80
70. Grain boundary migration in high-purity lead and dilute lead-tin alloys
71. 10.1016/0001-6160(66)90168-410.1016/0001-6160(66)90168-4 ↗