journal article·1993-02

The solidification of large sections in ceramic injection molding: Part II. Modulated pressure molding

T. Zhang, J.R.G. Evans

Journal of Materials Research· Volume 8· Issue 2
Publisher page

Abstract

Cylindrical moldings of 20 and 40 mm diameter were injection molded with the application of modulated hold pressure using a well-characterized alumina-polypropylene suspension. The effect of frequency on sprue solidification was explored. For the smaller moldings, very little extension to sprue solidification time was obtained with pressures up to 140 MPa, and this is attributed to the low reciprocating volume flow. For the larger moldings, pressures of 98 MPa were sufficient to produce moldings with neither voids nor cracks, and the sprue solidification time corresponded to the time needed for solidification of the molding. The use of higher pressures resulted in internal residual stresses which were qualitatively detected by the defomation on annealing of polished diametral sections.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Injection Molding Process and Properties · Composite Material Mechanics · Epoxy Resin Curing Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (14)

Show source-provided references
1. 10.1007/BF0072278310.1007/BF00722783 ↗
2. 10.1016/0955-2219(91)90033-V10.1016/0955-2219(91)90033-V ↗
3. Mills · Plast. Rubb. Proc. Applic. · 1983 · 3 · 181
4. 11 Zhang T. and Evans J.R.G. J. Euro. Ceram. Soc. (in press).
5. 10.1016/0956-7143(90)90240-W10.1016/0956-7143(90)90240-W ↗
6. 10.1007/BF0057651910.1007/BF00576519 ↗
7. Allan · Plastics and Rubber Processing and Applications · 1983 · 3 · 85
8. 10.1016/0955-2219(89)90025-310.1016/0955-2219(89)90025-3 ↗
9. 10.1016/0955-2219(90)90030-J10.1016/0955-2219(90)90030-J ↗
10. 10.1007/BF0114876610.1007/BF01148766 ↗
11. 10.1016/0955-2219(89)90010-110.1016/0955-2219(89)90010-1 ↗
12. 10.1557/JMR.1993.018710.1557/JMR.1993.0187 ↗
13. 12 Zhang T. and Evans J. R. G. J. Am. Ceram. Soc. (in press).
14. 14 Zhang T. and Evans J. R. G. Ceramics Int. (in press).