Eutectoid temperature of carbon steel during laser surface hardening
Source abstract
Abstract
A new method was developed to determine the eutectoid temperature, Ac1, of carbon steel during laser surface hardening. In the method a three-dimensional heat flow model with temperature-dependent physical properties was set up and solved for the temperature distribution employing a finite element method (FEM). Workpieces were heat-treated to produce a melted and hardened zone by a single pass of a continuous-wave TEM00 CO2 laser beam. The depth profile of the melted zone was used as a calibrator to solve the uncertainty imposed by the unknown surface absorptivity. Obtained was an Ac1 of, on average, 770 °C, a superheat of 47 °C compared to the equilibrium Ac1 of 723 °C. Furthermore, the numerical model was also employed to predict the hardened depth, and the results show that, for a depth of more than 100 μm, the eutectoid temperature 770 °C leads to a depth about 10% smaller than that predicted at 723 °C. The use of the temperature-dependent physical properties is critical; an error up to 80% could result if constant physical properties are used.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Laser Material Processing Techniques · Welding Techniques and Residual Stresses · Laser and Thermal Forming Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. 10.1080/0149572850896187710.1080/01495728508961877 ↗
2. 1. Mazumder J. , Metals J. , 18 (May, 1983).10.1007/BF03338273 ↗
3. 10.1016/0921-5093(92)90121-G10.1016/0921-5093(92)90121-G ↗
4. Ohmura · JSME Int. J., Ser. I · 1991 · 34 · 421
5. 10.1080/1040778890894472110.1080/10407788908944721 ↗
6. 10.1557/JMR.1988.110810.1557/JMR.1988.1108 ↗
7. Stasa · 1985
8. Sandven · 1983 · 38 · 208
9. 10.1007/BF0266501210.1007/BF02665012 ↗
10. 10.1007/BF0071285910.1007/BF00712859 ↗
11. 10.1109/JQE.1974.114581010.1109/JQE.1974.1145810 ↗
12. Harth · J. Metals · 1976 · 28 · 5
13. Na · 1986 · 383
14. 10.1007/BF0264520510.1007/BF02645205 ↗
15. 10.1063/1.32426110.1063/1.324261 ↗
16. 10.1063/1.32767210.1063/1.327672 ↗
17. 10.1007/BF0264378010.1007/BF02643780 ↗
18. 10.1016/0257-8972(88)90122-310.1016/0257-8972(88)90122-3 ↗
19. Yariv · 1985
20. 20. Metals Handbook, 9th ed. (American Society for Metals, Metals Park, OH, 1978), Vol. 1, pp. 148–151, 742–759.
21. Hilliard · 1965
22. Howe · Ironmaking and Steelmaking · 1988 · 15 · 134
23. 10.1016/0001-6160(84)90175-510.1016/0001-6160(84)90175-5 ↗
24. Chang · 1983 · 218
25. Liu · Key Eng. Mater. · 1990 · 46 · 153