Effect of pulse current on structure and adhesion of apatite electrochemically deposited onto titanium substrates
Source abstract
Abstract
Apatite films were deposited onto titanium (Ti) metal substrates by an electrodeposition method under a pulse current. Metastable calcium phosphate solution was used as the electrolyte. The ion concentration of the solution was 1.5 times that of human body fluid, but the solution did not contain magnesium ions at 36.5 °C. We used an average current density of 0.01 A/cm2and current-on time (TON) equal to current-off time (TOFF) of 10 ms, 100 ms, 1 s, and 15 s. The adhesive strength between apatite and Ti substrates were relatively high atTON=TOFF= 10 ms. It is considered that small calcium phosphate (C–P) crystals with low crystallinity were deposited on the Ti surface without reacting with other C–P crystals, H2O, and HCO3−in the surrounding environment. This resulted in relaxation of the lattice mismatch and enhancement of the adhesive strength between the apatite crystals and Ti substrates.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Bone Tissue Engineering Materials · Dental Implant Techniques and Outcomes · Titanium Alloys Microstructure and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. 10.3363/prb1992.17.0_910.3363/prb1992.17.0_9 ↗
2. 10.1143/JJAP.32.L157710.1143/JJAP.32.L1577 ↗
3. 10.1002/jbm.82024060710.1002/jbm.820240607 ↗
4. Klug · 1974 · 505
5. 10.1016/S0142-9612(98)00032-510.1016/S0142-9612(98)00032-5 ↗
6. 10.1007/BF0035141510.1007/BF00351415 ↗
7. 10.1016/0304-3991(86)90146-410.1016/0304-3991(86)90146-4 ↗
8. 10.1023/A:102400082136810.1023/A:1024000821368 ↗
9. 10.4139/sfj.57.45910.4139/sfj.57.459 ↗
10. 10.1002/jbm.1000310.1002/jbm.10003 ↗
11. 10.1016/S0142-9612(01)00354-410.1016/S0142-9612(01)00354-4 ↗
12. 10.1016/S0022-2860(01)00716-510.1016/S0022-2860(01)00716-5 ↗
13. 10.1016/S0142-9612(97)00232-910.1016/S0142-9612(97)00232-9 ↗
14. 10.1002/(SICI)1097-4636(199602)30:2<261::AID-JBM17>3.0.CO;2-P10.1002/(SICI)1097-4636(199602)30:2<261::AID-JBM17>3.0.CO;2-P ↗
15. 10.1007/s10856-007-3127-110.1007/s10856-007-3127-1 ↗
16. 10.1007/BF0255605910.1007/BF02556059 ↗
17. 10.1002/jbm.a.1007210.1002/jbm.a.10072 ↗
18. 10.1016/0003-9969(66)90154-310.1016/0003-9969(66)90154-3 ↗
19. 10.4139/sfj.56.32910.4139/sfj.56.329 ↗
20. 10.1016/S0043-1648(98)00340-810.1016/S0043-1648(98)00340-8 ↗
21. Electrochemical deposition of apatite on titanium substrates by using pulse current.
22. 10.1016/S0142-9612(00)00061-210.1016/S0142-9612(00)00061-2 ↗
23. 10.1016/S0043-1648(98)00142-210.1016/S0043-1648(98)00142-2 ↗
24. 10.1016/S0142-9612(00)00221-010.1016/S0142-9612(00)00221-0 ↗
25. 10.1016/S0142-9612(97)00235-410.1016/S0142-9612(97)00235-4 ↗
26. 10.1016/S0883-5403(99)90063-310.1016/S0883-5403(99)90063-3 ↗
27. 10.1016/S0142-9612(02)00025-X10.1016/S0142-9612(02)00025-X ↗
28. 10.1016/S0142-9612(00)00273-810.1016/S0142-9612(00)00273-8 ↗
29. Mechanisms of inhibition of calcification.10.1097/00003086-198910000-00038 ↗
30. 10.2109/jcersj2.116.6810.2109/jcersj2.116.68 ↗
31. Haruyama · 2005 · 171
32. Effect of pyrophosphate on fluoride enhanced remineralization after an erosive challenge.
33. 10.1016/j.dental.2005.09.00710.1016/j.dental.2005.09.007 ↗