journal article·2025-06-28

High-cycle fatigue analysis in dumbbell-shaped lattice structure of Ti6Al4V through additive manufacturing: experimental and numerical simulation

P. Parameswaran, D. Kesavan, R. Jayaganthan

Journal of Materials Research· Volume 40· Issue 12
Publisher page

Abstract

Additive manufacturing of strut-based lattice structures offers a promising solution for bone defect restoration, providing a superior alternative to conventional implants in complex tissue engineering. This study evaluates the fatigue life of dumbbell lattice structures with varying nodal diameters (1.0 mm, 1.1 mm, and 1.2 mm) while maintaining a consistent unit cell size. Very high-cycle fatigue testing (up to 10⁷ cycles) revealed improved fatigue strengths of 74 MPa, 78 MPa, and 82 MPa for the respective configurations. Fatigue cracks primarily nucleated at the surface due to adhered powder despite minimal surface roughness. Failures were characterized by localized strain accumulation, forming a crush band at a 45° angle. Finite Element Analysis (FEA) in Abaqus validated experimental findings, and FE-SAFE simulations provided detailed fatigue life assessments, confirming enhanced fatigue performance. The results highlight the critical role of nodal reinforcement in optimizing lattice structures for biomedical applications.Graphical AbstractEnhanced fatigue performance of dumbbell-reinforced lattice structures due to improved nodal design and reduced stress concentrations.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · Titanium Alloys Microstructure and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (54)

Show source-provided references
1. A. Changdar, S.S. Chakraborty, Y. Li, C. Wen, J. Mater. Sci. Technol. 183, 89 (2024)10.1016/j.jmst.2023.09.045 ↗
2. L. Zhang, B. Song, J.J. Fu, S.S. Wei, L. Yang, C.Z. Yan, H. Li, L. Gao, Y.S. Shi, Topology-optimized lattice structures with simultaneously high stiffness and light weight fabricated by selective laser melting: Design, manufacturing and characterization. J. Manuf. Process. 56, 1166 (2020)10.1016/j.jmapro.2020.06.005 ↗
3. N. Khan, A. Riccio, Prog. Aerosp. Sci. 149, 101021 (2024)10.1016/j.paerosci.2024.101021 ↗
4. Y. Ma, Y. Wang, S. Tong, Y. Wang, Z. Wang, R. Sui, K. Yang, F. Witte, S. Yang, J. Orthop. Translat. 49, 135 (2024)10.1016/j.jot.2024.08.003 ↗
5. W. Zhang, J. Xu, Mater. Des. 221, 110994 (2022)
6. T. Maconachie, M. Leary, B. Lozanovski, X. Zhang, M. Qian, O. Faruque, M. Brandt, Mater. Des. 183, 108137 (2019)10.1016/j.matdes.2019.108137 ↗
7. F. Collini, G. Meneghetti, Mater. Des. 244, 113077 (2024)10.1016/j.matdes.2024.113077 ↗
8. R. Hedayati, S.M. Ahmadi, K. Lietaert, B. Pouran, Y. Li, H. Weinans, C.D. Rans, A.A. Zadpoor, Isolated and modulated effects of topology and material type on the mechanical properties of additively manufactured porous biomaterials. J. Mech. Behav. Biomed. Mater. 79, 254 (2018)10.1016/j.jmbbm.2017.12.029 ↗
9. S.M. Ahmadi, R. Hedayati, R.K. Ashok Kumar Jain, Y. Li, S. Leeflang, A.A. Zadpoor, Effects of laser processing parameters on the mechanical properties, topology, and microstructure of additively manufactured porous metallic biomaterials: a vector-based approach. Mater Des 134, 234 (2017)10.1016/j.matdes.2017.08.046 ↗
10. M. Dallago, S. Raghavendra, V. Luchin, G. Zappini, D. Pasini, M. Benedetti, The role of node fillet, unit-cell size and strut orientation on the fatigue strength of Ti-6Al-4V lattice materials additively manufactured via laser powder bed fusion. Int. J. Fatigue 142, 105946 (2021)10.1016/j.ijfatigue.2020.105946 ↗
11. L. Yang, Y. Li, Y. Chen, C. Yan, B. Liu, Y. Shi, Topologically optimized lattice structures with superior fatigue performance. Int. J. Fatigue 165, 107188 (2022)
12. M. Dallago, V. Fontanari, E. Torresani, M. Leoni, C. Pederzolli, C. Potrich, M. Benedetti, Fatigue and biological properties of Ti-6Al-4V ELI cellular structures with variously arranged cubic cells made by selective laser melting. J. Mech. Behav. Biomed. Mater. 78, 381 (2018)10.1016/j.jmbbm.2017.11.044 ↗
13. K. Karami, A. Blok, L. Weber, S.M. Ahmadi, R. Petrov, K. Nikolic, E.V. Borisov, S. Leeflang, C. Ayas, A.A. Zadpoor, M. Mehdipour, E. Reinton, V.A. Popovich, Continuous and pulsed selective laser melting of Ti6Al4V lattice structures: effect of post-processing on microstructural anisotropy and fatigue behaviour. Addit. Manuf. 36, 101433 (2020)
14. W. Abd-Elaziem, M.A. Darwish, A. Hamada, W.M. Daoush, Mater. Des. 241, 112850 (2024)10.1016/j.matdes.2024.112850 ↗
15. S.A. Tyagi, M. Manjaiah, Bioprinting 30, e00267 (2023)10.1016/j.bprint.2023.e00267 ↗
16. K. Moghadasi, M.S. Mohd Isa, M.A. Ariffin, M.Z. Mohd Jamil, S. Raja, B. Wu, M. Yamani, M.R. Bin Muhamad, F. Yusof, M.F. Jamaludin, M.S. Bin Ab Karim, B. Binti Abdul Razak, N. Bin Yusoff, J. Mater. Res. Technol. 17, 1054 (2022)10.1016/j.jmrt.2022.01.050 ↗
17. N.M. della Ventura, C.Q. Dong, S.A. Messina, R.R. Collino, G.H. Balbus, S.P. Donegan, J.D. Miller, D.S. Gianola, M.R. Begley, Heterogeneity in millimeter-scale Ti-6Al-4V lattice primitives: challenges in defining effective properties for metamaterial design. Mater Des 238, 112695 (2024)10.1016/j.matdes.2024.112695 ↗
18. J.H. Rao, N. Stanford, A survey of fatigue properties from wrought and additively manufactured Ti-6Al-4V. Mater. Lett. 283, 128800 (2021)
19. P. Parameswaran, S. Gairola, D. Kesavan, R. Jayaganthan, A Study on compression behavior and fracture morphology in dumbbell-shaped Ti6Al4V lattice structures fabricated through additive manufacturing. J. Mater. Eng. Perform. (2024). https://doi.org/10.1007/s11665-024-10560-010.1007/s11665-024-10560-0 ↗
20. M. W. Brown and K. J. Miller: A theory for fatigue failure under multiaxial stress-strain conditions (n.d.).
21. A. Viswanath, K.A. Khan, I. Barsoum, Design of novel isosurface strut-based lattice structures: effective stiffness, strength, anisotropy and fatigue properties. Mater. Des. 224, 111293 (2022)10.1016/j.matdes.2022.111293 ↗
22. Y. Murakami, S. Nemat-Nasser, Growth and stability of interacting surface flaws of arbitrary shape. Eng. Fract. Mech. 17(3), 193 (1983)10.1016/0013-7944(83)90027-9 ↗
23. D. Mahmoud, K.S. Al-Rubaie, M.A. Elbestawi, The influence of selective laser melting defects on the fatigue properties of Ti6Al4V porosity graded gyroids for bone implants. Int. J. Mech. Sci. 193, 106180 (2021)10.1016/j.ijmecsci.2020.106180 ↗
24. L. Yang, C. Yan, W. Cao, Z. Liu, B. Song, S. Wen, C. Zhang, Y. Shi, S. Yang, Compression–compression fatigue behaviour of gyroid-type triply periodic minimal surface porous structures fabricated by selective laser melting. Acta Mater. 181, 49 (2019)10.1016/j.actamat.2019.09.042 ↗
25. P.Y. Li, Y.E. Ma, W.B. Sun, X. Qian, W. Zhang, Z.H. Wang, Fracture and failure behavior of additive manufactured Ti6Al4V lattice structures under compressive load. Eng. Fract. Mech. 244, 107537 (2021)
26. M. Alaña, A. Cutolo, S. Ruiz de Galarreta, B. Van Hooreweder, Influence of relative density on quasi-static and fatigue failure of lattice structures in Ti6Al4V produced by laser powder bed fusion. Sci. Rep. (2021). https://doi.org/10.1038/s41598-021-98631-310.1038/s41598-021-98631-3 ↗
27. R.O. Ritchie, Mechanisms of Fatigue-Crack propagation in ductile and brittle solids. Int. J. Fract. 100, 55 (1999)10.1023/A:1018655917051 ↗
28. J. Rogers, J. Elambasseril, C. Wallbrink, B. Krieg, M. Qian, M. Brandt, M. Leary, The impact of surface orientation on surface roughness and fatigue life of laser-based powder bed fusion Ti-6Al-4V. Addit. Manuf. 85, 104149 (2024)
29. D. Mahmoud, K.S. Al-Rubaie, M.A. Elbestawi, The influence of selective laser melting defects on the fatigue properties of Ti6Al4V porosity graded gyroids for bone implants. Int. J. Mech. Sci. 193, 106180 (2021)10.1016/j.ijmecsci.2020.106180 ↗
30. J. Chen, M. Fan, L. Zhou, W. Chen, Y. Ren, W. Li, W. Huang, Y. Niu, Z. Li, C. Li, The effect of microstructure on the fatigue behavior of titanium alloy graded porous structures fabricated by selective laser melting. J. Market. Res. 27, 4290 (2023)
31. L. Yang, S. Wu, C. Yan, P. Chen, L. Zhang, C. Han, C. Cai, S. Wen, Y. Zhou, Y. Shi, Fatigue properties of Ti-6Al-4V Gyroid graded lattice structures fabricated by laser powder bed fusion with lateral loading. Addit. Manuf. 46, 102214 (2021)
32. S. Zhao, S.J. Li, W.T. Hou, Y.L. Hao, R. Yang, R.D.K. Misra, The influence of cell morphology on the compressive fatigue behavior of Ti-6Al-4V meshes fabricated by electron beam melting. J. Mech. Behav. Biomed. Mater. 59, 251 (2016)10.1016/j.jmbbm.2016.01.034 ↗
33. S. Raghavendra, A. Molinari, V. Fontanari, G. Zappini, and M. Benedetti: in Procedia structural integrity (Elsevier, 2020), pp. 517–524.10.1016/j.prostr.2020.10.061 ↗
34. T. Zhang, F. Liu, J. Chen, Y. Tang, K. Zhang, H. Xie, X. Tao, Dual-graded lattice with mechanical bionics to enhance fatigue performance. Int. J. Mech. Sci. 279, 109474 (2024)
35. S. Hitchon, W. Anderson, J.S. Milner, G. Hong, T. Ivanov, R. Willing, D. Holdsworth, Static compression and fatigue behavior of heat-treated selective laser melted titanium alloy (Ti6Al4V) gyroid cylinders. J. Mech. Behav. Biomed. Mater. 146, 106076 (2023)10.1016/j.jmbbm.2023.106076 ↗
36. M. W. Brown and K. J. Miller: A Theory for fatigue failure under multiaxial stress-strain conditions (n.d.).
37. C. Peng, P. Tran, H. Nguyen-Xuan, A.J.M. Ferreira, Mechanical performance and fatigue life prediction of lattice structures: parametric computational approach. Compos. Struct. 235, 111821 (2020)10.1016/j.compstruct.2019.111821 ↗
38. N. Limbasiya, A. Jain, H. Soni, V. Wankhede, G. Krolczyk, P. Sahlot, J. Market. Res. 21, 1141 (2022)
39. H. Masuo, Y. Tanaka, S. Morokoshi, H. Yagura, T. Uchida, Y. Yamamoto, Y. Murakami, Influence of defects, surface roughness and HIP on the fatigue strength of Ti-6Al-4V manufactured by additive manufacturing. Int. J. Fatigue 117, 163 (2018)10.1016/j.ijfatigue.2018.07.020 ↗
40. M. He, Y. Li, J. Yin, Q. Sun, W. Xiong, S. Li, L. Yang, L. Hao, Compressive performance and fracture mechanism of bio-inspired heterogeneous glass sponge lattice structures manufactured by selective laser melting. Mater. Des. 214, 110396 (2022)
41. M. Leary, M. Mazur, H. Williams, E. Yang, A. Alghamdi, B. Lozanovski, X. Zhang, D. Shidid, L. Farahbod-Sternahl, G. Witt, I. Kelbassa, P. Choong, M. Qian, M. Brandt, Inconel 625 lattice structures manufactured by selective laser melting (SLM): mechanical properties, deformation and failure modes. Mater. Des. 157, 179 (2018)10.1016/j.matdes.2018.06.010 ↗
42. M. Mazur, M. Leary, M. McMillan, S. Sun, D. Shidid, and M. Brandt: in Laser additive manufacturing: materials, design, technologies, and applications (Elsevier, 2017), pp. 119–161.10.1016/B978-0-08-100433-3.00005-1 ↗
43. R. Verma, P. Kumar, R. Jayaganthan, H. Pathak, Extended finite element simulation on Tensile, fracture toughness and fatigue crack growth behaviour of additively manufactured Ti6Al4V alloy. Theoret. Appl. Fract. Mech. 117, 103163 (2022)10.1016/j.tafmec.2021.103163 ↗
44. R. Gandhi, L. Pagliari, R. Gerosa, F. Concli, Quasi-static and fatigue performance of Ti-6Al-4V triply periodic minimal surface scaffolds manufactured via laser powder bed fusion for hard-tissue engineering. Results Eng. 24, 103101 (2024)10.1016/j.rineng.2024.103101 ↗
45. C. Elangeswaran, A. Cutolo, G.K. Muralidharan, C. de Formanoir, F. Berto, K. Vanmeensel, B. Van Hooreweder, Effect of post-treatments on the fatigue behaviour of 316L stainless steel manufactured by laser powder bed fusion. Int. J. Fatigue 123, 31 (2019)10.1016/j.ijfatigue.2019.01.013 ↗
46. B. Van Hooreweder, Y. Apers, K. Lietaert, J.P. Kruth, Improving the fatigue performance of porous metallic biomaterials produced by selective laser melting. Acta Biomater. 47, 193 (2017)10.1016/j.actbio.2016.10.005 ↗
47. K. Karami, A. Blok, L. Weber, S.M. Ahmadi, R. Petrov, K. Nikolic, E.V. Borisov, S. Leeflang, C. Ayas, A.A. Zadpoor, M. Mehdipour, E. Reinton, V.A. Popovich, Continuous and pulsed selective laser melting of Ti6Al4V lattice structures: Effect of post-processing on microstructural anisotropy and fatigue behaviour. Addit Manuf. 36, 101433 (2020)
48. S. Raghavendra, F. Russo, R. De Biasi, E. Rustighi, G. Zappini, F. Berto, M. Benedetti, Characterization of compressive fatigue behavior and acoustic emission analysis of Ti6Al4V cellular lattice materials fabricated by laser powder bed fusion. Fatigue Fract. Eng. Mater. Struct. 47, 3910 (2024)10.1111/ffe.14387 ↗
49. A. Orange, Y. Wu, and L. Yang: An investigation of the fatigue strength of multiple cellular structures fabricated by electron beam powder bed fusion additive manufacturing process (n.d.).
50. D. Zhao, Y. Huang, Y. Ao, C. Han, Q. Wang, Y. Li, J. Liu, Q. Wei, Z. Zhang, Effect of pore geometry on the fatigue properties and cell affinity of porous titanium scaffolds fabricated by selective laser melting. J. Mech. Behav. Biomed. Mater. 88, 478 (2018)10.1016/j.jmbbm.2018.08.048 ↗
51. S.M. Ahmadi, R. Hedayati, Y. Li, K. Lietaert, N. Tümer, A. Fatemi, C.D. Rans, B. Pouran, H. Weinans, A.A. Zadpoor, Fatigue performance of additively manufactured meta-biomaterials: the effects of topology and material type. Acta Biomater. 65, 292 (2018)10.1016/j.actbio.2017.11.014 ↗
52. S. Raghavendra, A. Molinari, A. Cao, C. Gao, F. Berto, G. Zappini, M. Benedetti, Quasi-static compression and compression–compression fatigue behavior of regular and irregular cellular biomaterials. Fatigue Fract. Eng. Mater. Struct. 44(5), 1178 (2021)10.1111/ffe.13422 ↗
53. S. Amin Yavari, R. Wauthle, J. Van Der Stok, A.C. Riemslag, M. Janssen, M. Mulier, J.P. Kruth, J. Schrooten, H. Weinans, A.A. Zadpoor, Fatigue behavior of porous biomaterials manufactured using selective laser melting. Mater. Sci. Eng. C 33(8), 4849 (2013)10.1016/j.msec.2013.08.006 ↗
54. M.W. Wu, J.K. Chen, M.K. Tsai, P. Wang, T.L. Cheng, B.H. Lin, P.H. Chiang, A. Dhinakar, Uniaxial compression properties and compression fatigue performance of selective laser melted Ti–6Al–4V cellular structure. Met. Mater. Int. 28(1), 132 (2022)10.1007/s12540-021-01021-7 ↗