journal article·2022-11Open access

3D printing of PLA-TPU with different component ratios: Fracture toughness, mechanical properties, and morphology

D. Rahmatabadi, I. Ghasemi, M. Baniassadi, K. Abrinia, M. Baghani

Abstract

In this study, three PLA-TPU compounds were prepared by the melt mixing method and after the process of compounding, filament preparation, and 3D printing with Fused Deposition Modeling (FDM). The mechanical properties under compression, tensile, bending, shear modes, and fracture toughness were comprehensively and experimentally assessed. Also, for thermal analysis and microstructural evaluation, Dynamic Mechanical Thermal Analysis (DMTA) and Scanning Electron Microscopy (SEM) were used. The thermal analysis of the PLA-TPU compounds showed an increase and decrease in the loss and storage modulus with increasing PLA value, while all compounds had almost the same glass transition temperature. The results of mechanical tests showed that by raising the amount of PLA, the strength and formability increased and decreased, respectively in all loading modes. The UTS values for PLA50, PLA70, and PLA90 were achieved 27.27 MPa, 40.91 MPa, and 54.18 MPa, respectively. Also, the fracture toughness results were consistent with the mechanical properties. The PLA90 had 1.69 and 2.36 times higher fracture toughness than the PLA70 and PLA50 compounds, respectively. SEM images showed that with the increase in the amount of TPU, the voids caused by the printing and neck growth due to the incomplete integration of the inter and intralayer rasters rises, which is the reason for the decrease in strength and printability. The shear test results also confirmed the SEM images quantitatively and showed that the connection between the layers and density improves with increasing the amount of PLA.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Bone Tissue Engineering Materials · 3D Printing in Biomedical Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. The potential of additive manufacturing in the smart factory industrial 4.0: a review10.3390/app9183865 ↗
2. A comprehensive experimental investigation on 4D printing of PET-G under bending10.1016/j.jmrt.2022.03.121 ↗
3. In-plane energy absorption characteristics and mechanical properties of 3D printed novel hybrid cellular structures10.1016/j.jmrt.2022.08.064 ↗
4. Mechanical characterization of fused deposition modeling (FDM) 3D printed parts
5. 4D printing by fused deposition modeling (FDM)
6. Experimental investigation on mechanical characterization of 3D printed PLA produced by fused deposition modeling (FDM)10.1088/2053-1591/abe8f3 ↗
7. A review on additive manufacturing of polymer-fiber composites10.1016/j.compstruct.2017.08.088 ↗
8. Assessment of controllable shape transformation, potential applications, and tensile shape memory properties of 3D printed PETG10.1016/j.jmrt.2022.04.076 ↗
9. Statistical and experimental analysis of process parameters of 3D nylon printed parts by fused deposition modeling: response surface modeling and optimization10.1007/s11665-021-05848-4 ↗
10. Comparative property analysis of fused filament fabrication PLA using fresh and recycled feedstocks10.1088/2053-1591/ac96d4 ↗
11. Aminzadeh · 2021 · 483
12. Design, evaluation, and optimization of 3D printed truss scaffolds for bone tissue engineering10.1016/j.jmbbm.2021.104594 ↗
13. Fused deposition modeling-based additive manufacturing (3D printing): techniques for polymer material systems
14. Multi-shape active composites by 3D printing of digital shape memory polymers
15. Thermal and mechanical properties of PLA-based multiscale cellulosic biocomposites10.1016/j.jmrt.2022.02.072 ↗
16. Toughening brittle polymers with shape memory polymers10.1016/j.polymer.2017.12.017 ↗
17. The compatibilization of PLA-g-TPU graft copolymer on polylactide/thermoplastic polyurethane blends10.1007/s10965-019-1999-7 ↗
18. A review on 3D printed matrix polymer composites: its potential and future challenges10.1007/s00170-019-04534-z ↗
19. Structure and blood compatibility of highly oriented poly(lactic acid)/thermoplastic polyurethane blends produced by solid hot stretching10.1002/pat.3156 ↗
20. Tensile, three-point bending and impact strength of 3D printed parts using PLA and recycled PLA filaments: a statistical investigation10.1016/j.jmrt.2022.03.013 ↗
21. Structure and mechanical properties of thermoplastic polyurethane, based on hyperbranched polyesters10.1002/app.24779 ↗
22. Bio-plastics and elastomers from polylactic acid/thermoplastic polyurethane blends10.1002/app.41104 ↗
23. A novel composite coupled hardness with flexibleness—polylactic acid toughen with thermoplastic polyurethane10.1002/app.33675 ↗
24. Preparation and characterization of biodegradable polylactide/thermoplastic polyurethane elastomer blends10.1002/app.33338 ↗
25. Fracture of 3D-printed polymers: crucial role of filament-scale geometric features10.1016/j.engfracmech.2019.106818 ↗
26. Characterization of carbon fiber reinforced PLA composites manufactured by fused deposition modeling10.1016/j.jcomc.2021.100112 ↗
27. Fracture toughness of additively manufactured carbon fiber reinforced composites
28. The effect of in-plane layer orientation on mixed-mode I-II fracture behavior of 3D-printed poly-carbonate specimens10.1016/j.engfracmech.2020.107018 ↗
29. Increased fracture toughness of additively manufactured semi-crystalline thermoplastics via thermal annealing10.1016/j.polymer.2020.123091 ↗
30. Measurements of the mechanical response of unidirectional 3D-printed PLA10.1016/j.matdes.2017.03.051 ↗
31. ASTM D5045 Fracture Toughness and Strain Energy Release Rate of Plastic Materials n.d. https://www.testresources.net/applications/standards/astm/astm-d5045-fracture-toughness-and-strain-energy-release-rate-of-plastic-materials/(accessed July 3, 2022).
32. An approach for mechanical property optimization of fused deposition modeling with polylactic acid via design of experiments10.1108/RPJ-07-2014-0083 ↗
33. Controlling toughness and strength of FDM 3D-printed PLA components through the raster layup10.1016/j.compositesb.2019.107562 ↗
34. Experimental investigation of FDM process for improvement of mechanical properties and production cost10.1108/RPJ-10-2012-0091 ↗
35. 4D printing of PET-G via FDM including tailormade excess third shape10.1016/j.mfglet.2022.05.002 ↗
36. Effects of interfacial adhesion on the rubber toughening of poly(vinyl chloride) Part 1. Impact tests10.1016/S0032-3861(00)00375-X ↗
37. Deformation and fracture behaviour of a rubber-toughened epoxy: 1. Microstructure and fracture studies10.1016/0032-3861(83)90070-8 ↗
38. The role of interface on the toughening and failure mechanisms of thermoplastic nanocomposites reinforced with nanofibrillated rubber10.1039/D1NR07363J ↗
39. Prediction of deformation and failure of rubber-toughened adhesive joints10.1016/j.ijadhadh.2003.08.002 ↗
40. The morphology, properties, and shape memory behavior of polylactic acid/thermoplastic polyurethane blends10.1002/pen.23873 ↗
41. Impact damage resistance of 3D printed continuous fibre reinforced thermoplastic composites using fused deposition modelling10.1016/j.compositesb.2018.04.054 ↗
42. A review on voids of 3D printed parts by fused filament fabrication10.1016/j.jmrt.2021.10.108 ↗
43. Eliminating voids and reducing mechanical anisotropy in fused filament fabrication parts by adjusting the filament extrusion rate10.1016/j.jmapro.2022.06.026 ↗
44. Huang · 2014 · 49 · 363
45. Weld formation during material extrusion additive manufacturing10.1039/C7SM00950J ↗
46. Gurrala · 2014 · 9 · 141
47. Influence of temperature on polymer parts manufactured by fused deposition modeling process10.1007/s40430-019-1616-z ↗